Added dict key validation & updated documentation

.readthedocs.yaml

@@ -13,4 +13,3 @@ python:
       path: .
       extra_requirements:
         - docs
-  system_packages: true

openaerostruct/docs/user_reference/mesh_surface_dict.rst

@@ -87,14 +87,42 @@ The surface dict will be provided to Groups, including ``Geometry``, ``AeroPoint
       - 3D ndarray
       - m
       - ``x, y, z`` coordinates of the mesh vertices, can be created by ``generate_mesh``.
+    * - span
+      - 10.0
+      - m
+      - Wing span.
+    * - taper
+      - 0.5
+      - 
+      - Wing taper ratio.
+    * - sweep
+      - 10.0
+      - deg
+      - Wing sweep angle.
+    * - dihedral
+      - 5.0
+      - deg
+      - Wing dihedral.
     * - twist_cp
       - np.array([0, 5])
       - deg
       - B-spline control points for twist distribution. Array convention is ``[wing tip, ..., root]`` in symmetry cases, and ``[tip, ..., root, ... tip]`` when ``symmetry = False``.
     * - chord_cp
       - np.array([0.1, 5])
+      - 
+      - B-spline control points for chord distribution. This is a chord scaler applied to the initial mesh, not the chord value [m] itself. Array convention is the same as ``twist_cp``.
+    * - xshear_cp
+      - np.array([0.1, 0.2])
+      - m
+      - B-spline control points for the x-wise shear deformation of the wing.
+    * - yshear_cp
+      - np.array([0.1, 0.2])
+      - m
+      - B-spline control points for the y-wise shear deformation of the wing.
+    * - zshear_cp
+      - np.array([0.1, 0.2])
       - m
-      - B-spline control points for chord distribution. Array convention is the same than ``twist_cp``.
+      - B-spline control points for the z-wise shear deformation of the wing.
     * - ref_axis_pos
       - 0.25
       - 
@@ -240,6 +268,10 @@ The surface dict will be provided to Groups, including ``Geometry``, ``AeroPoint
       - 0.12
       - 
       - Thickness-over-chord ratio of airfoil provided for the wingbox cross-section.
+    * - strength_factor _for_upper_skin
+      - 1.0
+      - 
+      - A factor to adjust the yield strength of the upper skin relative to the lower skin.
     * - data_x_upper
       - 1D ndarray
       - 
@@ -257,5 +289,21 @@ The surface dict will be provided to Groups, including ``Geometry``, ``AeroPoint
       - 
       - ``y`` coordinates of the wingbox cross-section's lower surface
 
+.. list-table:: FFD parameters
+    :widths: 20 20 5 55
+    :header-rows: 1
+
+    * - Key
+      - Example value
+      - Units
+      - Description
+    * - mx
+      - 2
+      - 
+      - Number of the FFD control points in the x direction.
+    * - my
+      - 2
+      - 
+      - Number of the FFD control points in the y direction.
 ..
   TODO: list default values (if any), and whethre each key is required or optional.

openaerostruct/examples/drag_polar_ground_effect.py

@@ -138,7 +138,7 @@ def compute_drag_polar_ground_effect(Mach, alphas, heights, surfaces, trimmed=Fa
         "wing_type": "rect",
         "symmetry": True,
         "span": 12.0,
-        "chord": 1,
+        "root_chord": 1,
         "span_cos_spacing": 1.0,
         "chord_cos_spacing": 0.0,
     }

openaerostruct/examples/rectangular_wing/drag_polar.py

@@ -37,7 +37,7 @@
     "wing_type": "rect",
     "symmetry": True,
     "span": 10.0,
-    "chord": 1,
+    "root_chord": 1,
     "span_cos_spacing": 1.0,
     "chord_cos_spacing": 1.0,
 }

openaerostruct/examples/rectangular_wing/mphys_example.py

@@ -17,7 +17,7 @@ def setup(self):
             "wing_type": "rect",
             "symmetry": True,
             "span": 10.0,
-            "chord": 1,
+            "root_chord": 1,
             "span_cos_spacing": 1.0,
             "chord_cos_spacing": 1.0,
         }

openaerostruct/examples/rectangular_wing/opt_chord.py

@@ -39,7 +39,7 @@
     "wing_type": "rect",
     "symmetry": True,
     "span": 10.0,
-    "chord": 1,
+    "root_chord": 1,
     "span_cos_spacing": 1.0,
     "chord_cos_spacing": 1.0,
 }
@@ -105,8 +105,9 @@
 prob.driver.options["debug_print"] = ["nl_cons", "objs", "desvars"]
 
 # Setup problem and add design variables, constraint, and objective
+# wing.chord_cp is the chord scaling applied to the initial mesh
 prob.model.add_design_var("alpha", lower=-10.0, upper=15.0)
-prob.model.add_design_var("wing.chord_cp", lower=1e-3, upper=5.0)
+prob.model.add_design_var("wing.chord_cp", lower=1e-3, upper=5.0, units=None)
 prob.model.add_constraint(point_name + ".wing_perf.CL", equals=0.5)
 prob.model.add_constraint(point_name + ".wing.S_ref", equals=10.0)
 prob.model.add_objective(point_name + ".wing_perf.CD", scaler=1e4)

openaerostruct/examples/rectangular_wing/opt_twist.py

@@ -38,7 +38,7 @@
     "wing_type": "rect",
     "symmetry": True,
     "span": 10.0,
-    "chord": 1,
+    "root_chord": 1,
     "span_cos_spacing": 1.0,
     "chord_cos_spacing": 1.0,
 }

openaerostruct/examples/rectangular_wing/run_rect_wing.py

@@ -36,7 +36,7 @@
     "wing_type": "rect",
     "symmetry": True,
     "span": 10.0,
-    "chord": 1,
+    "root_chord": 1,
     "span_cos_spacing": 1.0,
     "chord_cos_spacing": 1.0,
 }

openaerostruct/examples/rectangular_wing/run_roll.py

@@ -37,7 +37,7 @@
     "wing_type": "rect",
     "symmetry": False,
     "span": 9.0,
-    "chord": 1,
+    "root_chord": 1,
     "span_cos_spacing": 1.0,
     "chord_cos_spacing": 1.0,
 }

openaerostruct/geometry/geometry_group.py

@@ -1,6 +1,7 @@
 import numpy as np
 
 import openmdao.api as om
+from openaerostruct.utils.check_surface_dict import check_surface_dict_keys
 
 
 class Geometry(om.Group):
@@ -23,6 +24,9 @@ def initialize(self):
     def setup(self):
         surface = self.options["surface"]
 
+        # key validation of the surface dict
+        check_surface_dict_keys(surface)
+
         # Get the surface name and create a group to contain components
         # only for this surface
         ny = surface["mesh"].shape[1]
@@ -91,10 +95,10 @@ def setup(self):
                     promotes_inputs=["chord_cp"],
                     promotes_outputs=["chord"],
                 )
-                comp.add_spline(y_cp_name="chord_cp", y_interp_name="chord", y_units="m")
+                comp.add_spline(y_cp_name="chord_cp", y_interp_name="chord", y_units=None)
                 bsp_inputs.append("chord")
                 if surface.get("chord_cp_dv", True):
-                    self.set_input_defaults("chord_cp", val=surface["chord_cp"], units="m")
+                    self.set_input_defaults("chord_cp", val=surface["chord_cp"], units=None)
 
             if "t_over_c_cp" in surface.keys():
                 n_cp = len(surface["t_over_c_cp"])

openaerostruct/geometry/geometry_mesh.py

@@ -37,7 +37,7 @@ class GeometryMesh(om.Group):
     twist[ny] : numpy array
         1-D array of rotation angles for each wing slice in degrees.
     chord_dist[ny] : numpy array
-        Chord length for each panel edge.
+        Spanwise distribution of the chord scaler.
     taper : float
         Taper ratio for the wing; 1 is untapered, 0 goes to a point at the tip.
 

openaerostruct/geometry/geometry_mesh_transformations.py

@@ -123,7 +123,7 @@ class ScaleX(om.ExplicitComponent):
     mesh[nx, ny, 3] : numpy array
         Nodal mesh defining the initial aerodynamic surface.
     chord[ny] : numpy array
-        Chord length for each panel edge.
+        Spanwise distribution of the chord scaler.
 
     Returns
     -------
@@ -147,7 +147,7 @@ def setup(self):
         mesh_shape = self.options["mesh_shape"]
         val = self.options["val"]
         self.ref_axis_pos = self.options["ref_axis_pos"]
-        self.add_input("chord", units="m", val=val)
+        self.add_input("chord", units=None, val=val)
         self.add_input("in_mesh", shape=mesh_shape, units="m")
 
         self.add_output("mesh", shape=mesh_shape, units="m")

openaerostruct/geometry/tests/test_geometry_mesh_transformations.py

@@ -164,6 +164,40 @@ def test_scalex_ref_axis_trailing_edge(self):
         # If chord_scaling_pos = 1, TE should not move
         assert_near_equal(mesh[-1, :, :], prob["comp.mesh"][-1, :, :], tolerance=1e-10)
 
+    def test_scalex_chord_value(self):
+        # test actual chord value of a rectangular wing
+
+        mesh_dict = {
+            "num_y": 5,
+            "num_x": 3,
+            "wing_type": "rect",
+            "symmetry": True,
+            "span": 2.0,
+            "root_chord": 0.2,
+        }
+        mesh_in = generate_mesh(mesh_dict)
+
+        # initial chord
+        chord_in = mesh_in[-1, 0, 0] - mesh_in[0, 0, 0]  # TE - LE
+
+        prob = om.Problem()
+        group = prob.model
+        comp = ScaleX(val=np.ones(3), mesh_shape=mesh_in.shape)
+        group.add_subsystem("comp", comp)
+
+        prob.setup()
+        chord_scaling = 1.3
+        prob.set_val("comp.chord", val=chord_scaling, units=None)  # apply chord scaling factor
+        prob.set_val("comp.in_mesh", val=mesh_in, units="m")
+
+        prob.run_model()
+
+        # chord after manipulation
+        mesh_out = prob.get_val("comp.mesh", units="m")
+        chord_out = mesh_out[-1, 0, 0] - mesh_out[0, 0, 0]  # TE - LE
+
+        assert_near_equal(chord_in * chord_scaling, chord_out, tolerance=1e-10)
+
     def test_sweep(self):
         symmetry = False
         mesh = get_mesh(symmetry)

openaerostruct/geometry/tests/test_vsp_mesh.py

@@ -25,7 +25,7 @@ def test_full(self):
             "wing_type": "rect",
             "symmetry": False,
             "span": 10.0,
-            "chord": 1,
+            "root_chord": 1,
             "span_cos_spacing": 0.0,
         }
 
@@ -44,7 +44,7 @@ def test_symm(self):
             "wing_type": "rect",
             "symmetry": True,
             "span": 10.0,
-            "chord": 1,
+            "root_chord": 1,
             "span_cos_spacing": 0.0,
         }
 

openaerostruct/geometry/utils.py

@@ -1,5 +1,6 @@
 import numpy as np
 from numpy import cos, sin, tan
+import warnings
 
 # openvsp python interface
 try:
@@ -94,7 +95,7 @@
     mesh[nx, ny, 3] : numpy array
         Nodal mesh defining the initial aerodynamic surface.
     chord_dist[ny] : numpy array
-        Chord length for each panel edge.
+        Spanwise distribution of the chord scaler.
 
     Returns
     -------
@@ -636,12 +637,39 @@
 def generate_mesh(input_dict):
     # Get defaults and update surface with the user-provided input
     surf_dict = get_default_geo_dict()
+
+    # Warn if a user provided a key that is not implemented
+    user_defined_keys = input_dict.keys()
+    for key in user_defined_keys:
+        if key not in surf_dict:
+            warnings.warn(
+                "Key `{}` in mesh_dict is not implemented and will be ignored".format(key),
+                category=RuntimeWarning,
+                stacklevel=2,
+            )
+    # Warn if a user did not define important keys
+    for key in ["num_x", "num_y", "wing_type", "symmetry"]:
+        if key not in user_defined_keys:
+            warnings.warn(
+                "Missing `{}` in mesh_dict. The default value of {} will be used.".format(key, surf_dict[key]),
+                category=RuntimeWarning,
+                stacklevel=2,
+            )
+
+    # Apply user-defined options
     surf_dict.update(input_dict)
 
+    # Warn if a user defined span and root_chord for CRM
+    if surf_dict["wing_type"] == "CRM":
+        if "span" in user_defined_keys or "root_chord" in user_defined_keys:
+            warnings.warn(
+                "`span` and `root_chord` in mesh_dict will be ignored for the CRM wing.",
+                category=RuntimeWarning,
+                stacklevel=2,
+            )
+
     num_x = surf_dict["num_x"]
     num_y = surf_dict["num_y"]
-    span = surf_dict["span"]
-    chord = surf_dict["root_chord"]
     span_cos_spacing = surf_dict["span_cos_spacing"]
     chord_cos_spacing = surf_dict["chord_cos_spacing"]
 
@@ -655,6 +683,8 @@
 
     # Generate rectangular mesh
     if surf_dict["wing_type"] == "rect":
+        span = surf_dict["span"]
+        chord = surf_dict["root_chord"]
         mesh = gen_rect_mesh(num_x, num_y, span, chord, span_cos_spacing, chord_cos_spacing)
 
     # Generate CRM mesh. Note that this outputs twist information

openaerostruct/integration/aerostruct_groups.py

@@ -11,6 +11,7 @@
 from openaerostruct.aerodynamics.compressible_states import CompressibleVLMStates
 from openaerostruct.structures.tube_group import TubeGroup
 from openaerostruct.structures.wingbox_group import WingboxGroup
+from openaerostruct.utils.check_surface_dict import check_surface_dict_keys
 
 import openmdao.api as om
 
@@ -26,6 +27,9 @@ def setup(self):
         DVGeo = self.options["DVGeo"]
         connect_geom_DVs = self.options["connect_geom_DVs"]
 
+        # key validation of the surface dict
+        check_surface_dict_keys(surface)
+
         geom_promotes_in = []
         geom_promotes_out = ["mesh"]
 

openaerostruct/tests/test_aero_atmos.py

@@ -31,8 +31,6 @@ def test(self):
             "fem_model_type": "tube",
             "twist_cp": twist_cp,
             "mesh": mesh,
-            "num_x": mesh.shape[0],
-            "num_y": mesh.shape[1],
             # Aerodynamic performance of the lifting surface at
             # an angle of attack of 0 (alpha=0).
             # These CL0 and CD0 values are added to the CL and CD

openaerostruct/tests/test_simple_rect_aero.py

@@ -20,7 +20,6 @@ def test(self):
         surf_dict = {
             # Wing definition
             "name": "wing",  # name of the surface
-            "type": "aero",
             "symmetry": True,  # if true, model one half of wing
             # reflected across the plane y = 0
             "S_ref_type": "wetted",  # how we compute the wing area,

openaerostruct/tests/test_simple_rect_aero_roll.py

@@ -20,7 +20,6 @@ def test(self):
         surf_dict = {
             # Wing definition
             "name": "wing",  # name of the surface
-            "type": "aero",
             "symmetry": False,  # if true, model one half of wing
             # reflected across the plane y = 0
             "S_ref_type": "wetted",  # how we compute the wing area,

openaerostruct/tests/test_simple_rect_aero_sideslip.py

@@ -20,7 +20,6 @@ def test(self):
         surf_dict = {
             # Wing definition
             "name": "wing",  # name of the surface
-            "type": "aero",
             "symmetry": False,  # if true, model one half of wing
             # reflected across the plane y = 0
             "S_ref_type": "wetted",  # how we compute the wing area,

openaerostruct/tests/test_simple_rect_aero_wo_symmetry.py

@@ -20,7 +20,6 @@ def test(self):
         surf_dict = {
             # Wing definition
             "name": "wing",  # name of the surface
-            "type": "aero",
             "symmetry": False,  # if true, model one half of wing
             # reflected across the plane y = 0
             "S_ref_type": "wetted",  # how we compute the wing area,