This file will emulate joypad buttons using an Arduino pro micro clone for use on Euro Truck Simulator 2. Is mainly based on sample code from this library: https://github.com/MHeironimus/ArduinoJoystickLibrary
My version is made to be used on 6Pin 8 Speed + R Truck Electric Gear Shift Knob 81326200043 for MAN TGA TGX TGS (you can bought one on ebay).
| Wire/Knob button | Pro Micro Pin / Function |
|---|---|
| Upper button | Emulated X button |
| Blue | GND |
| Yellow | 5 |
| Side selector | Emulated B button |
| Violet | 4 |
| Green | GND |
| Lower selector | (Emulated A button (both positions) |
| White | GND |
| Red | 3 |
| Blue | 2 |
| Note: solder a spare wire between center position of lower selector to pin 2 |
After programming Adruino you have to load game, then go to Settings / Controls.
I use this setup: Button 1 (A) as Selector 1 and Button 2 (B) as Selector 2. Then choose any transmission mode for H shifter.
Upper button, emulated as X is free, I use it as engine brake control.
Refer to game settings wizard for furhter instructions
Made with 🩷 by M