WeldVertices

Welds together replicated vertices that have equal attributes using a supplied test function.

HRESULT WeldVertices(
    uint16_t* indices, size_t nFaces,
    size_t nVerts, const uint32_t* pointRep,
    uint32_t* vertexRemap,
    std::function<bool (uint32_t v0, uint32_t v1)> weldTest );

HRESULT WeldVertices(
    uint32_t* indices, size_t nFaces,
    size_t nVerts, const uint32_t* pointRep,
    uint32_t* vertexRemap,
    std::function<bool (uint32_t v0, uint32_t v1)> weldTest );

Parameters

The indices array is provided as an input, and is modified by the weld operation.

pointRep is required for the weld vertices operation and should be computed using GenerateAdjacencyAndPointReps. The choice of the epsilon parameter passed to that function determines the candidate set of potential vertices to weld, and if 0 is used topographical point-representatives are computed.

vertexRemap is an array describing the welded vertices, and must be nVerts in size: oldLoc = vertexRemap[newLoc]. This parameter is optional and can be nullptr.

weldTest is invoked to compare two vertices which are candidates for welding based on the point-representatives.

Return value

The function returns an HRESULT value for both success and failure. The value of S_FALSE indicates that no welding took place either because there were no candidates or because the weldTest function always returned false. In case this, any vertexRemap returned will be the identity.

Remarks

It is recommended that after you perform welding that you use OptimizeVertices followed by CompactVB to remove all the unused vertices that result from welding.

Example

auto mesh = std::unique_ptr<WaveFrontReader<uint16_t>>();

if ( FAILED( mesh->Load( L"test.obj" ) ) )
   // Error

size_t nFaces = mesh->indices.size() / 3;
size_t nVerts = mesh->vertices.size();

std::unique_ptr<XMFLOAT3[]> pos( new XMFLOAT3[ nVerts ] );
for( size_t j = 0; j < nVerts; ++j )
   pos[ j ] = mesh->vertices[ j ].position;

std::unique_ptr<uint32_t[]> preps( new uint32_t[ nVerts ] );
if ( FAILED( GenerateAdjacencyAndPointReps( mesh->indices.data(), nFaces,
   pos.get(), nVerts, 0.f, preps.get(), nullptr ) ) )
   // Error

std::unique_ptr<uint16_t[]> newIndices( new uint16_t[ nFaces * 3 ] );
memcpy(newIndices.get(), mesh->indices.data(), sizeof(uint16_t) * nFaces * 3;

if ( FAILED( WeldVertices(newIndices.get(), nFaces, nVerts, preps.get(), nullptr,
    {
        static const XMVECTORF32 s_Epsilon = { { { 1e-20f, 1e-20f, 1e-20f, 1e-20f } } };

        XMVECTOR vA = XMLoadFloat3(&mesh->vertices[ v0 ].position);
        XMVECTOR vB = XMLoadFloat3(&mesh->vertices[ v1 ].position);

        XMVECTOR nA = XMLoadFloat3(&mesh->vertices[ v0 ].normal);
        XMVECTOR nB = XMLoadFloat3(&mesh->vertices[ v1 ].normal);

        XMVECTOR uvA = XMLoadFloat2(&mesh->vertices[ v0 ].textureCoordinate);
        XMVECTOR uvB = XMLoadFloat2(&mesh->vertices[ v1 ].textureCoordinate);

        if (XMVector3NearEqual(vA, vB, s_Epsilon))
        {
            if (XMVector3NearEqual(nA, nB, s_Epsilon))
            {
                if (XMVector2NearEqual(uvA, uvB, s_Epsilon))
                {
                    return true;
                }
            }
        }
        return false;
    }) ) )
    // Error

std::unique_ptr<uint32_t[]> vertRemap( new uint32_t[ nVerts ] );
size_t trailingUnused = 0;
if ( FAILED( OptimizeVertices( newIndices.get(), nFaces, nVerts,
    vertRemap.get(), &trailingUnused ) ) )
   // Error

std::unique_ptr<WaveFrontReader<uint16_t>::Vertex> vb(
   new WaveFrontReader<uint16_t>::Vertex[ nVerts - trailingUnused ] );

if ( FAILED( CompactVB( mesh->vertices.data(),
   sizeof(WaveFrontReader<uint16_t>::Vertex),
   nVerts, trailingUnused, vertRemap.get(), vb.get() ) ) )
   // Error