This repository provides the DNP3 and Modbus bindings for the OpenFMB Model (Phase 1 Dec 15, 2015). These bindings are also used for the simulators and the hmi in the microgrid demo. Refer to Wiki. When buiding this project several targets are created. The targets are the dnp3-to-mqtt and the modbus-to-mqtt. This project pulls for outside repos for the DNP3 L2 and Modbus TCP/IP stacks. They are at the following locations.
https://repo.totalgrid.org/artifactory/totalgrid-release/org/totalgrid/
Each adapter uses a configuration file to mapping the device protocol objects to the equivalent OpenFMB topics. Sample files can be found here.
In order to use the DNP3 adapter you will need to install a DNP3 L2 master and slave on your system. The instructions for to that are location here.
The modbus adapter is installed during the build.
To run the DNP3 Adapter you will need to use the following command.
shell
java -cp openfmb-dnp3-to-mqtt-0.0.5-SNAPSHOT-jar-with-dependencies.jar com.greenenergycorp.openfmb.mapping.mqtt.dnp3.Dnp3ToMqttEntry openfmb_dnp3_mqtt.xml
Note the config file in this case in is the same directory as the jar and called openfmb_dnp3_mqtt.xml.
To run the DNP3 Test Set you will need to use the following command.
shell
dnp3testset-S -F dnp3_slave_default.xml
Note: the config file in this case is called dnp3_slave_default.xml
To configure the Modbus adapter to match up with a simulator you will need a Modbus slave device or testset (which is not included in this distribution). There are three devices that can be implemented with this adapter. Solar, Load and Battery. A MODBUS slave test set can be found in the community for testing if required.
To run the Modbus Adapte you will need to use the following command.
shell
java -cp openfmb-dnp3-to-mqtt-0.0.5-SNAPSHOT-jar-with-dependencies.jar com.greenenergycorp.openfmb.mapping.mqtt.modbus.ModbusToMqttEntry openfmb_modbus_mqtt_battery.xml
Note the config file in this case in is the same directory as the jar and called openfmb_modbus_mqtt_battery.xml.
Please refer to the Wiki pages for the Demonstration and Prerequisites for the demo and these cooresponding repository projects.
git clone https://github.com/openfmb/openfmb-adapters.git
cd openfmb-adaptors
mvn clean install -Pslf4j-simpleThe build jar(s) are put in the target directories for the dnp3-to-mqtt and the modbus-to-mqtt subprojects and will need to be moved to the main directory where the config files are located.
There is no configuration required specifically for the project to build. The adapters will need to be configured to run.
Refer to this page on basic instructions for the DNP3 Slave Test Set.
Refer to this page for adapter modeling information that supports both the DNP3 and Modbus adapters. Sample configuration files for both modbus and dnp3 have been provided.
Daniel Evans, Green Energy Corp
If you'd like to contribute, please fork the repository and use a feature branch. Pull requests are warmly welcome.
Please review the CONTRIBUTING file.
See the APACHE_FILE_HEADER file for more info.