Tamagotchi for a basic LED arduino project
- 1x 1kΩ resistor
- 3x 10kΩ resistor
- 3x 220 Ω resistor
- 3x LEDs
- 3x Push Button
- 1x 2x16 LCD Screen
- Arduino Uno R3 SMD
- 2x Breadboard
- 23x Wires
| Wire Colour | Pinned To |
|---|---|
| Red | Power |
| Black | Ground |
| Orange | RS and Enable LCD pins |
| Green | D4-D7 LCD pins |
| Yellow | Button right terminal |
| Blue | LED anodes |
| Resistance (Ω) | Connection |
|---|---|
| 220 | LED Anode → Digital Pin wire |
| 1k | VO LCD pin → GND |
| 10k | Left terminal of each button → GND |
