forked from project-chip/connectedhomeip
-
Notifications
You must be signed in to change notification settings - Fork 0
Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
[TI] Update CC2674 migration guide to include CC1354P10-1 (project-ch…
…ip#29348) * update migration guide to include instructions on migrating to cc1354p10-1 * minor documentation update * ran dos2unix on guide * Restyled by prettier-markdown --------- Co-authored-by: Restyled.io <commits@restyled.io>
- Loading branch information
1 parent
5cc9360
commit 0b39434
Showing
1 changed file
with
124 additions
and
109 deletions.
There are no files selected for viewing
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -1,109 +1,124 @@ | ||
| # Running Matter Examples on the TI SimpleLink CC2674P10 and CC2674R10 | ||
|
|
||
| The existing Matter project examples are based on LP_EM_CC1354P10_6. If using | ||
| the CC2674P10, the following migration steps are required. Developers are | ||
| strongly encouraged to start with a `cc13x4_26x4` example and migrate the | ||
| project accordingly. Example projects can be found in the following location: | ||
| `matter/examples/[application]/cc13x4_26x4` | ||
|
|
||
| ## Dependencies | ||
|
|
||
| The following must be installed on your system before proceeding: | ||
|
|
||
| - [SysConfig](https://www.ti.com/tool/SYSCONFIG) v1.16.2 or later | ||
| - [SIMPLELINK-LOWPOWER-F2-SDK](https://www.ti.com/tool/SIMPLELINK-LOWPOWER-SDK) | ||
| v7.10.01.24 | ||
|
|
||
| ## Matter source code changes | ||
|
|
||
| The following are changes to the Matter source code files which should be | ||
| applied to convert a `matter/examples/[application]/cc13x4_26x4` project to the | ||
| CC2674P10 device | ||
|
|
||
| - `examples/[application]/cc13x4_26x4/args.gni`, modify/add the following | ||
| defines for the CC2674 | ||
| - `ti_simplelink_board = CC2674` | ||
| - `ti_simplelink_device = CC2674P10RGZ` | ||
| - `third_party/ti_simplelink_sdk/repo_cc13xx_cc26xx`, replace this folder | ||
| contents with the 7.10.01.24 version from | ||
| [TI's downloads page](https://www.ti.com/tool/download/SIMPLELINK-LOWPOWER-F2-SDK/7.10.01.24) | ||
| which is required to add support SDK for the CC2674P10 device. | ||
|
|
||
| ## Configuring `chip.syscfg` in the SysConfig GUI | ||
|
|
||
| 1. To open `matter/examples/[application]/cc13x4_26x4/chip.syscfg` in the GUI, | ||
| add the following line to the top of the file: | ||
|
|
||
| ``` | ||
| // @cliArgs --product <path to SDK>/.metadata/product.json --board /ti/boards/LP_EM_CC1354P10_6 --rtos freertos | ||
| ``` | ||
|
|
||
| 2. Open the `syscfg` file using the standalone Sysconfig GUI | ||
| (`sysconfig_gui.sh`) from the SysConfig installation folder. | ||
| 3. Click on _Show Device View_ and then click _Switch_. | ||
| 4. Select _Board_ as _None_ and _Device_ as _`CC2674P10RGZ`_, Unselect | ||
| _`Lock PinMux`_, and click _Confirm_. | ||
| 5. To fix errors, make the following module changes: | ||
| - _RF Design_ and _RF Stacks -> BLE -> Radio_: click on _accepting the | ||
| current value_, which should be _`LP_CC2674P10_RGZ`_ in the drop down menu | ||
| for _Based On RF Design_ | ||
| - _TI DEVICES -> Device Configuration_: Clear | ||
| _`XOSC Cap Array Modification`_ | ||
| - _TI DRIVERS -> RF_: Set _Global Event Mask_ as _None_ and _No. of Antenna | ||
| Switch Control Pins_ as _0_ | ||
| - _TI DRIVERS -> UART2 -> `PinMux`_: Set _UART Peripheral_ to _UART0_, _TX | ||
| Pin_ to _`DIO_13/19`_, and _RX Pin_ to _`DIO_12/18`_ | ||
| - _TI DRIVERS APPS -> Button_: Set _`PinMux`_ of _CONFIG_BTN_LEFT_ to | ||
| _`DIO_15`_ and _CONFIG_BTN_RIGHT_ to _`DIO_14`_ | ||
| - _TI DRIVERS APPS -> LED_: Set _`PinMux`_ of _CONFIG_LED_RED_ to _`DIO_6`_ | ||
| and _CONFIG_LED_RIGHT_ to _`DIO_7`_ | ||
| 6. Save the SysConfig file (click on _Save As_) and ensure the file name matches | ||
| the reference from `BUILD.gn` (default project name is `chip.syscfg`). | ||
| 7. Open the new SysConfig file with a text editor and remove the generated | ||
| arguments. | ||
| ``` | ||
| /** | ||
| * These arguments were used when this file was generated. They will be automatically applied on subsequent loads | ||
| * via the GUI or CLI. Run CLI with '--help' for additional information on how to override these arguments. | ||
| * @cliArgs --device "CC2674P10RGZ" --package "RGZ" --part "Default" --rtos "freertos" --product "simplelink_cc13xx_cc26xx_sdk@7.10.01.24" | ||
| * @versions {"tool":"1.18.0+3130"} | ||
| */ | ||
| ``` | ||
| 8. Move the `*.syscfg` file into the | ||
| `matter/examples/[application]/cc13x4_26x4/` folder. Make sure that the | ||
| `args.gni` parameters are aligned for the `CC2674P10RGZ` as detailed above, | ||
| and build the example using the `README.md` instructions. | ||
| ## Modifications required for the CC2674R10 | ||
| After applying all items in the "Configuring `chip.syscfg` in the SysConfig GUI" | ||
| section, additional steps must also be applied to generate Matter project for | ||
| the CC2674R10. | ||
| - `examples/[application]/cc13x4_26x4/args.gni` should have | ||
| `ti_simplelink_board` as `CC2674` and `ti_simplelink_device = CC2674R10RGZ`. | ||
| - `examples/[application]/cc13x4_26x4/chip.syscfg` opened with a Text Editor | ||
| should change `ble.radioConfig.codeExportConfig.$name` to | ||
| `ti_devices_radioconfig_code_export_param2` and `ble.rfDesign` to | ||
| `LP_EM_CC1354P10_1` | ||
| Furthermore, the subsequent changes apply specifically for the CC2674R10 and | ||
| should be addressed from a SysConfig Editor. | ||
| 1. Pins will need to be reconfigured as such: | ||
| | SysConfig pin name | R10 `PinMux` | | ||
| | ------------------ | ------------ | | ||
| | UART_RX | `DIO_2` | | ||
| | UART_TX | `DIO_3` | | ||
| | CONFIG_BTN_LEFT | `DIO_13` | | ||
| | CONFIG_BTN_RIGHT | `DIO_14` | | ||
| | CONFIG_LED_RED | `DIO_6` | | ||
| | CONFIG_LED_GREEN | `DIO_7` | | ||
| 2. _Custom -> IEEE 802.15.4-2006, `250 kbps`, `OQPSK`, `DSSS = 1:8` -> Code | ||
| Export Configuration_, acknowledge and dismiss the PA radio setup error | ||
| 3. _Custom -> IEEE 802.15.4-2006, `250 kbps`, `OQPSK`, `DSSS = 1:8` -> RF | ||
| Command Symbols_, change `CMD_RADIO_SETUP` from `RF_cmdRadioSetup` to | ||
| `RF_cmdIeeeRadioSetup` and add the following functions from the drop-down: | ||
| `CMD_TX_TEST`,`CMD_IEEE_ED_SCAN`, `CMD_IEEE_CSMA`, and `CMD_IEEE_RX_ACK`. | ||
| # Running Matter Examples on the TI SimpleLink CC2674P10 and CC2674R10 | ||
|
|
||
| The existing Matter project examples are based on LP_EM_CC1354P10_6. If using | ||
| the CC2674P10, the following migration steps are required. Developers are | ||
| strongly encouraged to start with a `cc13x4_26x4` example and migrate the | ||
| project accordingly. Example projects can be found in the following location: | ||
| `matter/examples/[application]/cc13x4_26x4` | ||
|
|
||
| ## Dependencies | ||
|
|
||
| The following must be installed on your system before proceeding: | ||
|
|
||
| - [SysConfig](https://www.ti.com/tool/SYSCONFIG) v1.16.2 or later | ||
| - [SIMPLELINK-LOWPOWER-F2-SDK](https://www.ti.com/tool/SIMPLELINK-LOWPOWER-SDK) | ||
| v7.10.01.24 | ||
|
|
||
| ## Matter source code changes | ||
|
|
||
| The following are changes to the Matter source code files which should be | ||
| applied to convert a `matter/examples/[application]/cc13x4_26x4` project to the | ||
| CC2674P10 device | ||
|
|
||
| - `examples/[application]/cc13x4_26x4/args.gni`, modify/add the following | ||
| defines for the CC2674 | ||
| - `ti_simplelink_board = CC2674` | ||
| - `ti_simplelink_device = CC2674P10RGZ` | ||
| - `third_party/ti_simplelink_sdk/repo_cc13xx_cc26xx`, replace this folder | ||
| contents with the 7.10.01.24 version from | ||
| [TI's downloads page](https://www.ti.com/tool/download/SIMPLELINK-LOWPOWER-F2-SDK/7.10.01.24) | ||
| which is required to add support SDK for the CC2674P10 device. | ||
|
|
||
| ## Configuring `chip.syscfg` in the SysConfig GUI | ||
|
|
||
| 1. To open `matter/examples/[application]/cc13x4_26x4/chip.syscfg` in the GUI, | ||
| add the following line to the top of the file: | ||
|
|
||
| ``` | ||
| // @cliArgs --product <path to SDK>/.metadata/product.json --board /ti/boards/LP_EM_CC1354P10_6 --rtos freertos | ||
| ``` | ||
|
|
||
| 2. Open the `syscfg` file using the standalone Sysconfig GUI | ||
| (`sysconfig_gui.sh`) from the SysConfig installation folder. | ||
| 3. Click on _Show Device View_ and then click _Switch_. | ||
| 4. Select _Board_ as _None_ and _Device_ as _`CC2674P10RGZ`_, Unselect | ||
| _`Lock PinMux`_, and click _Confirm_. | ||
| 5. To fix errors, make the following module changes: | ||
| - _RF Design_ and _RF Stacks -> BLE -> Radio_: click on _accepting the | ||
| current value_, which should be _`LP_CC2674P10_RGZ`_ in the drop down menu | ||
| for _Based On RF Design_ | ||
| - _TI DEVICES -> Device Configuration_: Clear | ||
| _`XOSC Cap Array Modification`_ | ||
| - _TI DRIVERS -> RF_: Set _Global Event Mask_ as _None_ and _No. of Antenna | ||
| Switch Control Pins_ as _0_ | ||
| - _TI DRIVERS -> UART2 -> `PinMux`_: Set _UART Peripheral_ to _UART0_, _TX | ||
| Pin_ to _`DIO_13/19`_, and _RX Pin_ to _`DIO_12/18`_ | ||
| - _TI DRIVERS APPS -> Button_: Set _`PinMux`_ of _CONFIG_BTN_LEFT_ to | ||
| _`DIO_15`_ and _CONFIG_BTN_RIGHT_ to _`DIO_14`_ | ||
| - _TI DRIVERS APPS -> LED_: Set _`PinMux`_ of _CONFIG_LED_RED_ to _`DIO_6`_ | ||
| and _CONFIG_LED_RIGHT_ to _`DIO_7`_ | ||
| 6. Save the SysConfig file (click on _Save As_) and ensure the file name matches | ||
| the reference from `BUILD.gn` (default project name is `chip.syscfg`). | ||
| 7. Open the new SysConfig file with a text editor and remove the generated | ||
| arguments. | ||
| ``` | ||
| /** | ||
| * These arguments were used when this file was generated. They will be automatically applied on subsequent loads | ||
| * via the GUI or CLI. Run CLI with '--help' for additional information on how to override these arguments. | ||
| * @cliArgs --device "CC2674P10RGZ" --package "RGZ" --part "Default" --rtos "freertos" --product "simplelink_cc13xx_cc26xx_sdk@7.10.01.24" | ||
| * @versions {"tool":"1.18.0+3130"} | ||
| */ | ||
| ``` | ||
| 8. Move the `*.syscfg` file into the | ||
| `matter/examples/[application]/cc13x4_26x4/` folder. Make sure that the | ||
| `args.gni` parameters are aligned for the `CC2674P10RGZ` as detailed above, | ||
| and build the example using the `README.md` instructions. | ||
| ## Modifications required for the CC2674R10 | ||
| After applying all items in the "Configuring `chip.syscfg` in the SysConfig GUI" | ||
| section, additional steps must also be applied to generate Matter project for | ||
| the CC2674R10. | ||
| - `examples/[application]/cc13x4_26x4/args.gni` should have | ||
| `ti_simplelink_board` as `CC2674` and `ti_simplelink_device = CC2674R10RGZ`. | ||
| - `examples/[application]/cc13x4_26x4/chip.syscfg` opened with a Text Editor | ||
| should change `ble.radioConfig.codeExportConfig.$name` to | ||
| `ti_devices_radioconfig_code_export_param2` and `ble.rfDesign` to | ||
| `LP_EM_CC1354P10_1` | ||
| Furthermore, the subsequent changes apply specifically for the CC2674R10 and | ||
| should be addressed from a SysConfig Editor. | ||
| 1. Pins will need to be reconfigured as such: | ||
| | SysConfig pin name | R10 `PinMux` | | ||
| | ------------------ | ------------ | | ||
| | UART_RX | `DIO_2` | | ||
| | UART_TX | `DIO_3` | | ||
| | CONFIG_BTN_LEFT | `DIO_13` | | ||
| | CONFIG_BTN_RIGHT | `DIO_14` | | ||
| | CONFIG_LED_RED | `DIO_6` | | ||
| | CONFIG_LED_GREEN | `DIO_7` | | ||
| 2. _Custom -> IEEE 802.15.4-2006, `250 kbps`, `OQPSK`, `DSSS = 1:8` -> Code | ||
| Export Configuration_, acknowledge and dismiss the PA radio setup error | ||
| 3. _Custom -> IEEE 802.15.4-2006, `250 kbps`, `OQPSK`, `DSSS = 1:8` -> RF | ||
| Command Symbols_, change `CMD_RADIO_SETUP` from `RF_cmdRadioSetup` to | ||
| `RF_cmdIeeeRadioSetup` and add the following functions from the drop-down: | ||
| `CMD_TX_TEST`,`CMD_IEEE_ED_SCAN`, `CMD_IEEE_CSMA`, and `CMD_IEEE_RX_ACK`. | ||
| ## Building examples for the CC1354P10-1 | ||
| To migrate the CC1354P10-6 examples to the CC1354P10-1 platform, there are only | ||
| two steps: | ||
| 1. `examples/[application]/cc13x4_26x4/args.gni` should have | ||
| `ti_simplelink_board` as `CC1354P10-1` | ||
| 2. `examples/[application]/cc13x4_26x4/chip.syscfg` opened with a Text Editor | ||
| should change `ble.radioConfig.codeExportConfig.$name` to | ||
| `ti_devices_radioconfig_code_export_param2` and `ble.rfDesign` to | ||
| `LP_EM_CC1354P10_1` | ||
| After this, the example's `README.md` instructions can be followed to produce | ||
| the executable needed. |