Lighthouse

A fully modular, parametric, and customizable case design for home-made ESP8266/Arduino/Raspberry Pi projects, like temperature or motion sensors, information monitors, and more.

Built with OpenSCAD.

• Thingiverse: https://www.thingiverse.com/thing:3391397

Modules

Bases

Download the SCAD source to customize your own version.

NodeMCU v2, e.g. https://www.amazon.de/dp/B06Y1LZLLY

• STL 62.8mm diameter
• STL 67mm diameter
• STL 80mm diameter

NodeMCU v3, e.g. https://www.amazon.de/dp/B06Y1ZPNMS

• STL 67mm diameter
• STL 80mm diameter

OLED Module

Download the SCAD source to customize your own version.

OLED 0.96", e.g. https://www.amazon.de/dp/B01L9GC470

• STL 62.8mm diameter
• STL 67mm diameter
• STL 80mm diameter

OLED 1.3", e.g. https://www.amazon.de/dp/B078J78R45

• STL 62.8mm diameter
• STL 67mm diameter
• STL 80mm diameter

PIR Motion Sensor Module

HC-SR501, e.g. https://www.amazon.de/dp/B07CNBYRQ7

Download the SCAD source to customize your own version.

• STL 62.8mm diameter
• STL 67mm diameter
• STL 80mm diameter

Sensor Enclosure Module

Download the SCAD source to customize your own version.

• STL 62.8mm diameter
• STL 67mm diameter
• STL 80mm diameter

Empty Spacer Module

Download the SCAD source to customize your own version.

• STL 62.8mm diameter
• STL 67mm diameter
• STL 80mm diameter

Caps

Flat

Download the SCAD source to customize your own version.

• STL 62.8mm diameter
• STL 67mm diameter
• STL 80mm diameter

Dome

Download the SCAD source to customize your own version.

• STL 62.8mm diameter
• STL 67mm diameter
• STL 80mm diameter

Further ideas

• The node MCU and other boards as well have mounting holes, use them for better support in the base
• The PCB modules could be fit a little bit tighter into their respective casing making it easier e.g. to push a button from the outside
• Conversion modules between the large and small diameters

Precursor of this design

This design is inspired by https://www.thingiverse.com/thing:2627220.