net: dsa: ocelot: add driver for Felix switch family

This supports an Ethernet switching core from Vitesse / Microsemi /
Microchip (VSC9959) which is part of the Ocelot family (a brand name),
and whose code name is Felix. The switch can be (and is) integrated on
different SoCs as a PCIe endpoint device.

The functionality is provided by the core of the Ocelot switch driver
(drivers/net/ethernet/mscc). In this regard, the current driver is an
instance of Microsemi's Ocelot core driver, with a DSA front-end. It
inherits its name from VSC9959's code name, to distinguish itself from
the switchdev ocelot driver.

The patch adds the logic for probing a PCI device and defines the
register map for the VSC9959 switch core, since it has some differences
in register addresses and bitfield mappings compared to the other Ocelot
switches (VSC7511, VSC7512, VSC7513, VSC7514).

The Felix driver declares the register map as part of the "instance
table". Currently the VSC9959 inside NXP LS1028A is the only instance,
but presumably it can support other switches in the Ocelot family, when
used in DSA mode (Linux running on the external CPU, and not on the
embedded MIPS).

In a few cases, some h/w operations have to be done differently on
VSC9959 due to missing bitfields.  This is the case for the switch core
reset and init.  Because for this operation Ocelot uses some bits that
are not present on Felix, the latter has to use a register from the
global registers block (GCB) instead.

Although it is a PCI driver, it relies on DT bindings for compatibility
with DSA (CPU port link, PHY library). It does not have any custom
device tree bindings, since we would like to minimize its dependency on
device tree though.

Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS

@@ -17365,6 +17365,7 @@ M:	Vladimir Oltean <vladimir.oltean@nxp.com>
 M:	Claudiu Manoil <claudiu.manoil@nxp.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
+F:	drivers/net/dsa/ocelot/*
 F:	net/dsa/tag_ocelot.c
 
 VIVID VIRTUAL VIDEO DRIVER

drivers/net/dsa/Kconfig

@@ -52,6 +52,8 @@ source "drivers/net/dsa/microchip/Kconfig"
 
 source "drivers/net/dsa/mv88e6xxx/Kconfig"
 
+source "drivers/net/dsa/ocelot/Kconfig"
+
 source "drivers/net/dsa/sja1105/Kconfig"
 
 config NET_DSA_QCA8K

drivers/net/dsa/Makefile

@@ -20,4 +20,5 @@ obj-$(CONFIG_NET_DSA_VITESSE_VSC73XX_SPI) += vitesse-vsc73xx-spi.o
 obj-y				+= b53/
 obj-y				+= microchip/
 obj-y				+= mv88e6xxx/
+obj-y				+= ocelot/
 obj-y				+= sja1105/

drivers/net/dsa/ocelot/Kconfig

@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config NET_DSA_MSCC_FELIX
+	tristate "Ocelot / Felix Ethernet switch support"
+	depends on NET_DSA && PCI
+	select MSCC_OCELOT_SWITCH
+	select NET_DSA_TAG_OCELOT
+	help
+	  This driver supports the VSC9959 network switch, which is a member of
+	  the Vitesse / Microsemi / Microchip Ocelot family of switching cores.
+	  It is embedded as a PCIe function of the NXP LS1028A ENETC integrated
+	  endpoint.

drivers/net/dsa/ocelot/Makefile

@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_NET_DSA_MSCC_FELIX) += mscc_felix.o
+
+mscc_felix-objs := \
+	felix.o \
+	felix_vsc9959.o