staging: mt7621-dts: set up only two pcie phys

This soc has only two real pcie phys one of them
having a different register to enable and disable it.
Change this to have only two dt nodes for the phys and
use 'phy-cells' properly to say if the phy has dual ports.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20200320110123.9907-3-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/mt7621-dts/mt7621.dtsi

@@ -535,8 +535,8 @@
 		reset-names = "pcie0", "pcie1", "pcie2";
 		clocks = <&clkctrl 24 &clkctrl 25 &clkctrl 26>;
 		clock-names = "pcie0", "pcie1", "pcie2";
-		phys = <&pcie0_phy 0>, <&pcie0_phy 1>, <&pcie1_phy 0>;
-		phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2";
+		phys = <&pcie0_phy 1>, <&pcie2_phy 0>;
+		phy-names = "pcie-phy0", "pcie-phy2";
 
 		reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>,
 				<&gpio 8 GPIO_ACTIVE_LOW>,
@@ -573,7 +573,7 @@
 		#phy-cells = <1>;
 	};
 
-	pcie1_phy: pcie-phy@1e14a000 {
+	pcie2_phy: pcie-phy@1e14a000 {
 		compatible = "mediatek,mt7621-pci-phy";
 		reg = <0x1e14a000 0x0700>;
 		#phy-cells = <1>;