separate planter into bottomless planter + buoy #26
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
capsulecorplab
changed the title
- replace planter.scad w/ bottomless-planter.scad & buoy.scad - redesign water injection port - refactor global variables and helper functions - redesign wicking plate (with support beams) to accommodate planter redesign
capsulecorplab
force-pushed
the
maximize-volume-available-for-grow-medium
branch
from
24a56e2 to
16a0373
Compare
- temporarily set scale_factor to 0.2 - increase overhang angle to 60 deg - decrease wicking chamber diameter to 20 mm - increase wicking chamber diameter to 120 mm - implement new drain mesh in buoy using experimental honeycomb generator - fix rendering issues with water injection port at small scale
…small scale - temporarily set scale factor to 0.5 - refactor h_buoy to be global variable - fix water_injection_port() function in buoy to render properly at small scales
|
0.5x scale test print and buoyancy test |
- replace old drain mesh function w/ honeycomb generator - add wall clearance to base to allow for clearance fit with buoy - adjust chamfer to account for 60 deg overhang - add cavity for water injection port
as placeholder for full-scale model
as it's currently used to model the drain pipe
as to remove the need for drain mesh geometry in buoy
as it seems to have no effect and prints just fine at 30 mm/s for 0.2 mm layer height
as default speed for PLA from prusa slicer prints just fine
increases diameter of wicking chamber base to 1/5th planter diameter (~50 mm at full scale)
as to reduce stringing without crashing
capsulecorplab
force-pushed
the
maximize-volume-available-for-grow-medium
branch
from
0f7cc5c to
470a5c4
Compare
Closed
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
closes #24