Behavioral Cloning Project

Overview

More detailed report of the whole process from scratch is documented in writeup.

In this project, a deep neural network and convolutional neural network is used to clone driving behavior. A model is trained, validated and tested using Keras. The model outputs a steering angle to an autonomous vehicle.

A simulator have been used where one can steer a car around a track for data collection. Image data and steering angles, which is output of the simulator in data collection mode, use to train a neural network and then this model drives the car autonomously around the track.

This repository contains below files:

• model.py (script used to create and train the model)
• model.ipynb (jupyter notebook file to make model.py more readable and gives a better understanding of dataset)
• drive.py (script to drive the car)
• model.h5 (a trained Keras model)
• a report writeup file (either markdown or pdf)
• video.mp4 (a video recording of your vehicle driving autonomously around the track for at least one full lap)
• video.py (script to record autonomous driving as result of this project)
• a reedme file to give a short and comprehensive understanding of this project and repository

The Project

The goals / steps of this project are the following:

• Use the simulator to collect data of good driving behavior
• Design, train and validate a model that predicts a steering angle from image data
• Use the model to drive the vehicle autonomously around the first track in the simulator. The vehicle should remain on the road for an entire loop around the track.
• Summarize the results with a written report

Dependencies

This lab requires:

• CarND Term1 Starter Kit

The lab enviroment can be created with CarND Term1 Starter Kit. Click here for the details.

The following resources can be found in this github repository:

• drive.py
• video.py

Details About Files In This Directory

drive.py

Usage of drive.py requires you have saved the trained model as an h5 file, i.e. model.h5. See the Keras documentation for how to create this file using the following command:

model.save(filepath)

Once the model has been saved, it can be used with drive.py using this command:

python drive.py model.h5

The above command will load the trained model and use the model to make predictions on individual images in real-time and send the predicted angle back to the server via a websocket connection.

Note: There is known local system's setting issue with replacing "," with "." when using drive.py. When this happens it can make predicted steering values clipped to max/min values. If this occurs, a known fix for this is to add "export LANG=en_US.utf8" to the bashrc file.

Saving a video of the autonomous agent

python drive.py model.h5 run1

The fourth argument, run1, is the directory in which to save the images seen by the agent. If the directory already exists, it'll be overwritten.

ls run1

[2017-01-09 16:10:23 EST]  12KiB 2017_01_09_21_10_23_424.jpg
[2017-01-09 16:10:23 EST]  12KiB 2017_01_09_21_10_23_451.jpg
[2017-01-09 16:10:23 EST]  12KiB 2017_01_09_21_10_23_477.jpg
[2017-01-09 16:10:23 EST]  12KiB 2017_01_09_21_10_23_528.jpg
[2017-01-09 16:10:23 EST]  12KiB 2017_01_09_21_10_23_573.jpg
[2017-01-09 16:10:23 EST]  12KiB 2017_01_09_21_10_23_618.jpg
[2017-01-09 16:10:23 EST]  12KiB 2017_01_09_21_10_23_697.jpg
[2017-01-09 16:10:23 EST]  12KiB 2017_01_09_21_10_23_723.jpg
[2017-01-09 16:10:23 EST]  12KiB 2017_01_09_21_10_23_749.jpg
[2017-01-09 16:10:23 EST]  12KiB 2017_01_09_21_10_23_817.jpg
...

The image file name is a timestamp of when the image was seen. This information is used by video.py to create a chronological video of the agent driving.

video.py

python video.py run1

Creates a video based on images found in the run1 directory. The name of the video will be the name of the directory followed by '.mp4', so, in this case the video will be run1.mp4.

Optionally, one can specify the FPS (frames per second) of the video:

python video.py run1 --fps 48

Will run the video at 48 FPS. The default FPS is 60.

Why create a video

1. It's been noted the simulator might perform differently based on the hardware. So if your model drives succesfully on your machine it might not on another machine (your reviewer). Saving a video is a solid backup in case this happens.
2. You could slightly alter the code in drive.py and/or video.py to create a video of what your model sees after the image is processed (may be helpful for debugging).

Note

This model uses RGB files to predict steering angels. Feed it with RGB or if you are using cv2 that outputs BGR format keep in mind to convert it to RGB befor feeding to network.