Update readme to just point to the official docs

nRF24 · Aug 7, 2020 · f32e2b1 · f32e2b1
1 parent 2d75981
commit f32e2b1
Showing 1 changed file with 2 additions and 106 deletions.
diff --git a/README.md b/README.md
@@ -2,109 +2,5 @@
 
 Please see the full documentation at http://tmrh20.github.io/RF24Network/
 
-
-## Raspberry Pi - PreConfig
-
-### Possible pre-configuration:  
-If SPI is not already enabled, load it on boot:   
-
-    sudo raspi-config  
-
-A. Update the tool via the menu as required  
-B. Select Advanced and enable the SPI kernel module      
-C. Update other software and libraries:  
-
-     sudo apt-get update  
-     sudo apt-get upgrade  
-
-# RPi - RF24 Quick-Start  
-     
-A. Make a directory to contain the RF24 and possibly RF24Network lib and enter it:  
-
-    mkdir ~/rf24libs  
-    cd ~/rf24libs  
-
-B.  Clone the RF24 Repo  
-
-    git clone https://github.com/tmrh20/RF24.git RF24  
-
-C.  Change to the new RF24 directory    
-
-    cd RF24  
-
-D. Build the library, and run an example file:  
-
-    sudo make install
-    cd examples_RPi  
-    make  
-    sudo ./gettingstarted  
-
-
-# RPi - RF24Network Quick-Start  
-
-A. Enter the same directory that contains the RF24 library folder  
-
-    cd ~/rf24libs  
-
-B. Clone the RF24Network Repo  
-
-    git clone https://github.com/tmrh20/RF24Network.git RF24Network  
-
-C. Copy the RF24Network folder to the current directory, and delete the rest  
-
-    cd RF24Network  
-
-D. Build the library  
-
-    sudo make install
-    cd examples_RPi  
-    make  
-    sudo ./helloworld_rx   OR   sudo ./helloworld_tx  
-
-
-# Connection Info
-
-Using pin 15/GPIO 22 for CE, pin 24/GPIO8 (CE0) for CSN
-
-Can use either RPi CE0 or CE1 pins for radio CSN.
-Choose any RPi output pin for radio CE pin.
-
-**Constructor:**
-
-    RF24 radio(RPI_V2_GPIO_P1_15,BCM2835_SPI_CS0, BCM2835_SPI_SPEED_8MHZ);
-    or
-    RF24 radio(RPI_V2_GPIO_P1_15,BCM2835_SPI_CS1, BCM2835_SPI_SPEED_8MHZ);
-
-	RPi B+:
-	RF24 radio(RPI_BPLUS_GPIO_J8_15,RPI_BPLUS_GPIO_J8_24, BCM2835_SPI_SPEED_8MHZ);
-	or
-	RF24 radio(RPI_BPLUS_GPIO_J8_15,RPI_BPLUS_GPIO_J8_26, BCM2835_SPI_SPEED_8MHZ);
-
-**Pins:**  
-
-| PIN | NRF24L01 |    RPI     | RPi -P1 Connector |
-|-----|----------|------------|-------------------|
-|  1  |   GND    | rpi-gnd    |     (25)          |
-|  2  |   VCC    | rpi-3v3    |     (17)          |
-|  3  |   CE     | rpi-gpio22 |     (15)          |
-|  4  |   CSN    | rpi-gpio8  |     (24)          |
-|  5  |   SCK    | rpi-sckl   |     (23)          |
-|  6  |   MOSI   | rpi-mosi   |     (19)          |
-|  7  |   MISO   | rpi-miso   |     (21)          |
-|  8  |   IRQ    |    -       |       -           |
-
-
-See http://www.airspayce.com/mikem/bcm2835/index.html for BCM2835 class documentation.  
-Note: The BCM library has been customized slightly to allow use of hardware CE pins not
-in use for SPI, and to include a millis() function.  
-
-****************
-
-Based on the arduino lib from J. Coliz <maniacbug@ymail.com>.  
-the library was berryfied by Purinda Gunasekara <purinda@gmail.com>.  
-then forked from github stanleyseow/RF24 to https://github.com/jscrane/RF24-rpi  
-Network lib also based on https://github.com/farconada/RF24Network
-
-Currently optimized and aligned with Arduino fork of libraries by TMRh20:  
-https://github.com/tmrh20/RF24/RPi and https://github.com/tmrh20/RF24Network/RPi  
-Documentation: http://tmrh20.github.io
+See http://tmrh20.github.io/RF24/index.html for general RF24 configuration and setup
+See http://tmrh20.github.io/RF24/Linux.html and http://tmrh20.github.io/RF24/RPi.html for Linux/RPi related config/setup