Released as open source by NCC Group Plc - http://www.nccgroup.trust/
Developed by Richard Turnbull, richard [dot] turnbull [at] nccgroup [dot] com
http://www.github.com/nccgroup/Berserko
Released under AGPL, see LICENSE for more information
Further development of Berserko will take place at https://github.com/rteatea/Berserko
Berserko is a Burp extension to add support for performing Kerberos authentication. This is useful for testing in a Windows domain when NTLM authentication is not supported (Burp already handles NTLM). Berserko does not require that the machine running Burp be domain-joined (or even that it is running Windows).
The only existing solution that we are currently aware of for testing Kerberos applications using Burp is to chain through Fiddler, with authentication set up according to these instructions. But Fiddler is Windows-only, and chaining proxies adds complexity and hinders performance, so it's nice to have Kerberos capability within Burp itself.
- Burp Suite
- Tested on Windows and Linux (Kali)
Get the latest Berserko jar file from the Releases tab, or from the berserko\releases folder
Go to the Extender tab in Burp, select Add, make sure Java is selected as the Extension type, and then point it at the jar file. All being well, the Berserko tab should be added to the Burp UI.
- Go the Berserko tab and tick the Do Kerberos authentication checkbox.
- Click the Change button in the Domain Settings panel and supply the DNS name of the domain (not the NETBIOS name) and the hostname (or IP address) of a KDC (domain controller).
- Hit the Test domain settings button and check that you get a Successfully contacted Kerberos service response.
- Click the Change button in the Domain Credentials panel and supply a username and password for a domain account (just the plain username, not MYDOMAIN\user or user@mydomain.local or anything like that).
- Enable Kerberos delegation by letting Berserko create a krb5.conf file for you. Click the Create krb5.conf file button in the Delegation panel and choose a suitable location where the file can be created. Anywhere will do. You don't want to overwrite any existing system-level krb5.conf file. Say yes when Berserko asks if you want to set this as the krb5.conf file. It sucks that we have to do this (create a file) but it's not Berserko's fault and not Burp's fault - it's a limitation of the Java Kerberos APIs. For more information see the notes on Delegation below.
- Hit the Test credentials button and check that you get a "TGT successfully acquired" response. Hopefully it will also say "TGT is forwardable so delegation should work".
- Kerberos authentication should now be operational for hosts in the specified domain.
There are various controls on the Berserko tab in Burp.
The Do Kerberos authentication checkbox is a master switch. Until it is enabled, Berserko won't do anything at all.
The Restore defaults button will return Berserko to the default configuration (in which no domain details or user credentials are present).
The Clear Kerberos state button will clear out all Kerberos tickets and other state on the client. The only reason you might need to use this would be if changes had been made to the Kerberos configuration on the server side and you wanted to start from a fresh state.
The Write tickets to log button will write information about your current Kerberos tickets to Berserko's log stream - this can be useful for debugging/troubleshooting. To see the logs go to Burp's Extender tab, select Berserko and look at the Output tab below. It might make sense to use the Save to file option here, because the ticket data can easily fill the log buffer in the GUI.
Some controls have a help button that will pop up more information.
Specify the Domain DNS Name and the KDC Host using the controls in this section. The textboxes can't be edited directly; you have to use the 'Change' button to modify them.
The Domain DNS Name should be the DNS name of the domain you wish to authenticate against (to be precise, this is actually the Kerberos realm). This should be something like mydomain.acme.local. It should not be the NETBIOS name of the domain (which would be something like MYDOMAIN).
The KDC Host should be the hostname (or IP address) of a Kerberos KDC (Key Distribution Center). In a Windows domain, a KDC is simply a domain controller.
Having supplied the Domain DNS Name, you can use the Auto button to try to automatically locate a KDC. It does this by sending a DNS SRV query for the Kerberos service. If one of your DNS servers is a domain controller for the correct domain, this should work. If not, it won't. ❗This functionality won't work in recent versions of Burp, as the required DNS libraries are not being shipped as part of the bundled JRE. You can get round this by launching under a full JRE as described at the top of this README.:exclamation:
When the Domain DNS Name and KDC Host have been entered, use the Test domain settings button to test connectivity. All being well, you will get a Successfully contacted Kerberos service response.
See this file for lots more information about obtaining the correct values for these Domain Settings.
Specify the Username and Password for a domain account using the controls in this section. The textboxes can't be edited directly; you have to use the 'Change' button to modify them.
The Username should just be the plain username. This should be something like bob. It should not be MYDOMAIN\bob or bob@mydomain.acme.local or similar.
Having supplied the credentials, you can use the Test credentials button. This will attempt to acquire a Kerberos ticket-granting ticket for the specified user. If successful, you will get a TGT successfully acquired response. If not successful, note that this is a domain authentication attempt, so be careful not to lock out your account.
The password will not be saved in the Berserko config for next time unless the Save password in Burp config? checkbox is ticked. All other settings will be saved though.
Some applications use Kerberos delegation on the server side to forward the client's identity to other servers (but there isn't an easy way to determine from the client side if this is in use).
Berserko does support this, but there is a catch. Delegation only works if the user has a forwardable TGT (ticket-granting ticket). The Java implementation of Kerberos sadly doesn't provide a way to programmatically specify that a forwardable ticket should be acquired. This can only be done by adding an appropriate entry to the krb5.conf configuration file.
So, for delegation to work, Berserko has to be pointed at a suitable krb5.conf file, and there are two possible approaches here.
The easiest thing to do, and the recommended approach is to use the Create krb5.conf file button. This will create a suitable file for you at a location of your choice. You can put it in a temporary directory, or your project directory, or wherever. But the same file can be reused indefinitely, so it might make sense to put it somewhere more permanent. The Change button lets you select a different file to be used.
If you're interested, the krb5.conf file which is created is very simple, and will have the following contents:
[libdefaults]
forwardable = true
Alternatively, you could use the Change button to point at an existing krb5.conf file on the system. The only reason you might want to do this would be if there were other important Kerberos settings in this file that you wanted to be picked up by Berserko (which should work OK in theory, but has not been tested in practice). Note that the default location for this file on Linux is /etc/krb5.conf - other operating systems are less likely to have one. If you are pointing to an existing krb5.conf file, make sure you edit it to enable forwarding - add forwardable = true to the [libdefaults] section (or individually for each realm). But be careful. Asking Berserko to create the file for you is going to be the better option 99% of the time.
If you want to know whether your delegation configuration is successful, use the Check current config button. This will tell you whether the krb5.conf file has been located, and whether the forwardable setting is correct. Note also that Berserko will tell you whether or not it successfully acquired a forwardable TGT when you use the Test credentials button.
It's a good idea to make sure that you have a forwardable ticket before you start to use an application. It seems that IIS can cache the authentication status of a user on the server side in such a way that switching from a non-forwardable ticket to a forwardable one won't work.
The settings in this section control whether Berserko attempts Kerberos authentication 'reactively' (i.e. wait to get a 401 response from the server and then resend the request with a Kerberos authentication header added) or 'proactively' (i.e. add the Kerberos authentication header to the outgoing request).
The advantage of proactive authentication is that it only requires one HTTP round trip, while reactive authentication requires two. The disadvantage of proactive authentication is that it is possible that Kerberos authentication headers will be sent to hosts which aren't expecting them. Berserko is also better able to diagnose authentication errors when using the reactive strategy.
The Proactive Kerberos authentication, only after initial 401 received option is a hybrid of these two approaches, where Berserko will authenticate reactively on the first request to a host, but will thereafter be proactive.
In this section, you can define which hosts are considered to be in scope for Kerberos authentication.
By default, the All hosts in this Kerberos domain in scope for Kerberos box will be ticked. This means that Berserko will attempt Kerberos authentication only to web servers whose hostname ends with the domain DNS name. In many situations this will be sufficient. However, it is possible to have Kerberos-enabled web applications with a hostname which doesn't take this form (assuming that the administrator has set up a suitable Service Principal Name). To take account of this, you can add additional hosts to be considered in scope using the list box on the right. Note that wildcards can be used (* matches zero or more characters, ? matches any character except a dot).
Alternatively, you can tick the All hosts in scope for Kerberos authentication box. Obviously this has the advantage that you don't need to bother specifying the scope manually. The potential disadvantage of this configuration is that it might lead to Berserko sending Kerberos requests to the KDC to acquire service tickets for hosts which are not in the domain. This might cause performance issues, and might cause privacy issues (if you don't want this information leaked to the KDC). This is likely to be a particular problem with the Proactive Kerberos authentication strategy, in which case Berserko is going to try to add a Kerberos authentication header to every request passing through Burp. This combination of options is not recommended, and Berserko will warn you if it is selected (but not actually prevent it).
If neither All hosts in this Kerberos domain in scope for Kerberos nor All hosts in scope for Kerberos authentication are selected, the only hosts in scope will be those added to the list box.
The Plain hostnames considered part of domain option, if selected, means that 'plain hostnames' (i.e. hostnames which consist only of a single component) will be considered part of the domain (and hence automatically in scope if All hosts in this Kerberos domain in scope for Kerberos is selected). The main reason you might want to disable this would be if your machine was joined to a different domain from the one being authenticated against using Berserko (in which case, plain hostnames probably refer to hosts in the domain to which you are joined).
If selected, the Do not perform Kerberos authentication to servers which support NTLM option will instruct Berserko not to attempt Kerberos authentication against hosts which support NTLM in addition to Kerberos (i.e. hosts that return both WWW-Authenticate: NTLM and WWW-Authenticate: Negotiate headers).
The Alert Level and Logging Level can be configured here, to either NONE, NORMAL or VERBOSE.
Alert Level controls the amount of information sent to Burp's Alerts tab.
Logging Level controls the amount of information sent to Berserko's standard output (this can be viewed on the Extender tab). Note that increasing the Logging Level to VERBOSE will cause more information to be provided about any errors or exceptions that might occur.
If Kerberos domain trusts are in use in your environment, you can find some guidance here.
By default, Berserko performs all Kerberos interactions with the KDC over UDP (port 88). If you want to use TCP instead, this is possible. The most common reason for doing this is probably where an SSH port forward for TCP port 88 is in use. Just add udp_preference_limit = 1 to your krb5.conf file, so it looks like this:
[libdefaults]
forwardable = true
udp_preference_limit = 1
It is possible to configure the SPN that will be used for a particular host, by including a [berserko_spn_hints] section in the krb5.conf file (see above). The syntax is shown below.
[berserko_spn_hints]
server1.foo.com=web.domain.local@DOMAIN.LOCAL
server2.bar.org=app.domain2.local
The target server is on the left hand side of the equals sign, and the SPN to be used is on the right. The realm for the SPN can optionally be specified (if not, Berserko will attempt to determine the correct realm as normal). Do not include the HTTP/ part of the SPN here.
- If the UI for the Berserko tab doesn't display properly, try using Burp's Metal theme.
- Berserko won't play particularly nicely with Burp's own Platform Authentication feature. It's OK to have Platform Authentication enabled, but don't configure it for any of the hosts that require Kerberos (rather than NTLM) authentication.
- Berserko can't make use of any custom host mappings defined using Burp's Hostname Resolution feature when resolving a KDC hostname. If this is a problem, just specify the IP address of the KDC in the KDC host box. Note this isn't an issue for the actual requests being sent from Burp, only for Berserko's own communications with the KDC.
- Use of already acquired Kerberos tickets on domain-joined machines (not sure if this is possible or not)
- Capability to authenticate to multiple domains at the same time (this should work fine)
- Better control over forwardable tickets and delegation
Berserko is not compatible with Burp v2 before v2020.5.1. There are no problems with Burp v1.
This is caused by the version of OpenJDK being shipped with earlier Burp 2 versions not including some of the Kerberos functionality used by Berserko. This will cause a java.lang.ClassNotFoundException: com.sun.security.jgss.ExtendedGSSContext error when attempting to use Berserko.
The obvious workaround is to upgrade to v2020.5.1 or later. Alternatively, Berserko should work with any Burp v2 version if you launch using a full version of the Java runtime environment (i.e. not the one bundled with Burp).
Assuming you have java in your path:
java -jar burpsuite_pro.jar