added link to reference site

README.md

@@ -1,30 +1,20 @@
 # HC-05/06 AT Command Center
-Arduino program for simplifying AT command configuration of HC-05/06 devices over UART.
+Arduino library for simplifying AT command configuration of HC-05/06 devices over UART.
 
 Version 2.0
 
 ## Overview
-  <b>Description</b>: Simple HC05/06 AT configuration program. Requires 2nd 
-  UART (Serial1) defined. Full repo can be found at 
-  [HC06_AT_CommandCenter](https://github.com/ndroid/HC06_AT_CommandCenter).
+  <b>Description</b>: Simple HC05/06 AT configuration library for Arduino. 
+  Requires 2nd UART (Serial1) defined. Full repo can be found at 
+  [HC06_AT_CommandCenter](https://github.com/ndroid/HC06_AT_CommandCenter). 
+  Reference site for this library can be found 
+  [here](https://ndroid.github.io/HC06_AT_CommandCenter/index.html).
 
    Provides user menu for selecting configuration changes. Automatically identifies
    device (HC-05 or HC-06), firmware version, baud and parity settings.
    Serial1 automatically configured to match HC-05/06 UART settings. HC-05/06 
    must be in configuration mode (AT mode) (LED blinking to indicate Not Connected).
 
-   Recent batches of HC-06 appear to have HC-05 firmware (reporting Version 3).
-   There is no documentation of a Version 3 firmware for HC-06. AT commands differ
-   for HC-05 firmware, including CR+NL command terminators. Support for this version
-   has been added beginning with Revision 1 of this software.
-
- <dl>
-   <dt> AT response delays:</dt>
-   <dd> Around 10~25ms for Version 3.x  (newline terminated) - max observed 35ms<br>
-   <dd> Around 500ms for Version 1.x    (timeout terminated) - max observed 525ms<br>
-   <dd> Serial writes are asynchronous, so delays must also consider write time</dd>
- </dl>
-
  <br>
   <b>HC06 connections (for 5V boards - resistors not needed for 3V3):</b>
 
@@ -38,7 +28,7 @@ Version 2.0
                         Vss
 
  <br>
-  <b>HC05 connections: same as above, but also include (for AT mode selection)</b>
+  <b>HC05 connections: same as above, but also include (for AT mode selection):</b>
 
                 STATE  -----------------> [State pin]
                 EN/KEY <----+---R_1K----- [Mode pin]
@@ -73,6 +63,18 @@ Version 2.0
 
 <br>
 
+   Recent batches of HC-06 appear to have HC-05 firmware (reporting Version 3).
+   There is no documentation of a Version 3 firmware for HC-06. AT commands differ
+   for HC-05 firmware, including CR+NL command terminators. Support for this version
+   has been added beginning with Revision 1 of this software.
+
+ <dl>
+   <dt> AT response delays:</dt>
+   <dd> Around 10~25ms for Version 3.x  (newline terminated) - max observed 35ms<br>
+   <dd> Around 500ms for Version 1.x    (timeout terminated) - max observed 525ms<br>
+   <dd> Serial writes are asynchronous, so delays must also consider write time</dd>
+ </dl>
+
 ### History
 
       Created on: 18-Oct, 2021