Skip to content

neilbrown/GnuBee_PCx_uboot

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

59 Commits
 
 
 
 
 
 
 
 

Repository files navigation

                Ralink/MediaTek U-Boot for MIPS SoC
        RT3052/RT3352/RT3883/RT5350/MT7620/MT7621/MT7628/MT7688
                  Based on MediaTek SDK 5.0.1.0

                          LIST OF CHANGES

5.0.1.0-6:
----------------------------------------------------------
- Disable MT7628AN/MT7688AN calibration for DDR2 (DQS delay issue).
- Update MT7628KN/7688KN DDR calibration flow.
- Add support two SPI flash chips from GigaDevice.


5.0.0.5:
----------------------------------------------------------
- Updated Realtek RTL8370 API (RTL8367R/RTL8367M/RTL8370M).
- Added support RTL8367/RTL8370 GSW with MT7620 & MT7621 SoC.
- Enhanced RTL8367/RTL8370 configurations.
- Enhanced external GPHY support.
- Fixed redudant re-init of RTL8367/RTL8370 on soft-reboot.


5.0.0.4:
----------------------------------------------------------
- Fixed potential infinity loop on NAND erase.
- Fixed MT7621 xHCI issues, improve detect USB devices.
- Allow USB recovery not only from first USB storage device.


5.0.0.3:
----------------------------------------------------------
- Fixed MT7628 CPU clock calculation.
- Fixed MT7628 EPHY inits and WLED GPIO control.
- Fixed MT7621 SYS_CLK and SPI clock calculation.
- Fixed MT7621 xHCI KSEG0 memory deallocation.
- Fixed "memsize" Linux env value for MT7621 with 512MB RAM.
- Improved performance for 32MB/64MB SPI flash chips (4b mode).
- Improved stability for Winbond SPI flash chips (up to SPI clock 75MHz).
- Enabled SPI fast clock (50MHz) for all profiles.


5.0.0.2:
----------------------------------------------------------
- Added support Recovery from USB2 storage (see FEATURES).
- Added feature of blinking alert LED on erasing and flashing.
- Added FW image integrity check on Recovery from USB/TFTP.
- Fixed MT7620 GPIO init (disable JTAG/EPHY_LED GPIO by default).
- Fixed TFTPD server issue.
- Improved usability for UART console menu.


5.0.0.1:
----------------------------------------------------------
- Original MTK SDK 5.0.0.0 codebase.
- Added GPIO control module (Buttons/LEDs).
- Added TFTP server from ASUS (support TFTP client and ASUS Firmware Restoration).
- Added Realtek RTL8367 GSW driver.
- Fixed FE/ESW/GSW initialization.
- Fixed brick bug on update U-Boot via TFTP and TFTP transfer break.
- Fixed erase bug in MT7621 NAND code (infinity loop and erase all chip).
- Improved MT7621 NAND I/O performance (up to 3x).
- Shrinked MT7621 NAND U-Boot image size to enough one NAND block (131072).
- Support MT7621 NAND partitions configuration via profile.
- Support SPI clock and SPI DOR mode configuration via profile.
- Support Buttons and LEDs configuration via profile.
- Support EPHY ports on/off configuration via profile.


                            BUILD TOOLS

For MT7621 U-Boot:
- extract 'tools/mips-2012.03.tar.bz2' to /opt

For RT3XXX/MT7620/MT7628 U-Boot:
- extract 'tools/buildroot-gcc342.tar.bz2' to /opt

Both toolchains require x86 (32-bit) Linux environment.


                         BUILD INSTRUCTIONS

- Copy appropriate '.config' file (e.g. profiles/asus_rt-n11p/.config)
  to 'uboot-5.x.x.x' dir.
- Goto 'uboot-5.x.x.x' dir.
- Run 'make menuconfig', choose [Exit] and confirm [Save]. This is important step!
- Run 'make'.
- Use image file uboot.bin (ROM mode) for NOR and SPI-flash boards.
- Use image file uboot.img (RAM mode) for NAND-flash (or RT3XXX SPI-flash) boards 

To clean U-Boot tree:
- Run 'make clean'.
- Run 'make unconfig'.

NOTE:
1. U-Boot images for most ASUS devices is already builded.
2. U-Boot is configured for UART baud rate 115200.
3. All profiles has disabled option "Enable all Ethernet PHY" to prevent LAN-WAN
   spoofing (EPHY will be enabled later in FW logic). To force enable EPHY (e.g. for
   use OpenWRT/PandoraBox), select option "Enable all Ethernet PHY".


                         FLASH INSTRUCTIONS

- Upload appropriate U-Boot image file to router's /tmp dir (e.g. via WinSCP).
- Check U-Boot image checksum and compare with uboot.md5:

md5sum /tmp/uboot.bin

- Flash checked U-Boot via SSH or Telnet console (flash duration ~3 sec):

mtd_write write /tmp/uboot.bin Bootloader

- Reboot router.

                             WARNING

- Do not remove power supply during flash U-Boot!!!
- Device may be bricked due to your incorrect actions!!!


                             FEATURES

1. Press and hold the RESET button on Power-On: switch to Recovery mode. Use TFTP
   client or ASUS Firmware Restoration (device IP-address is 192.168.1.1). Also support
   Recovery from USB storage (not for all devices).
2. Press and hold the WPS button on Power-On: perform erase 'Config' partition (U-Boot
   Env & NVRAM) and self-reboot.


NOTE:
- U-Boot will perform switch to Recovery mode on flash content integrity fail.
- Alert LED(s) is blinking in Recovery mode and on erasing/flashing.
- To Recovery from USB storage, place FW image with a filename 'root_uImage' to first
  FAT16/FAT32 partition, plug-in USB2 pen and switch to Recovery mode (see item 1).
- Recovery from USB storage is not supported for ASUS RT-N65U (external USB chip).



-
Padavan
06/18/2016

About

No description, website, or topics provided.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C 53.8%
  • C++ 33.0%
  • Roff 9.6%
  • HTML 0.9%
  • Objective-C 0.8%
  • Assembly 0.5%
  • Other 1.4%