NETOBSERV-1430: make operator provide agent IP

[jotak]

Description

The agent IP as detected by the agent itself could potentially differ from the expected machine network IP, e.g. getting " 192.168.12.2" instead of "10.10.10.2".

By forcing the IP from the operator by inferring its host node IP, we ensure using the correct one

Note that the AGENT_IP env was already implemented on Agent side to override IP detection

Dependencies

n/a

Checklist

If you are not familiar with our processes or don't know what to answer in the list below, let us know in a comment: the maintainers will take care of that.

• Is this PR backed with a JIRA ticket? If so, make sure it is written as a title prefix (in general, PRs affecting the NetObserv/Network Observability product should be backed with a JIRA ticket - especially if they bring user facing changes).
• Does this PR require product documentation?
  • If so, make sure the JIRA epic is labelled with "documentation" and provides a description relevant for doc writers, such as use cases or scenarios. Any required step to activate or configure the feature should be documented there, such as new CRD knobs.
• Does this PR require a product release notes entry?
  • If so, fill in "Release Note Text" in the JIRA.
• Is there anything else the QE team should know before testing? E.g: configuration changes, environment setup, etc.
  • If so, make sure it is described in the JIRA ticket.
• QE requirements (check 1 from the list):
  • Standard QE validation, with pre-merge tests unless stated otherwise.
  • Regression tests only (e.g. refactoring with no user-facing change).
  • No QE (e.g. trivial change with high reviewer's confidence, or per agreement with the QE team).

[openshift-ci-robot]

@jotak: This pull request references NETOBSERV-1430 which is a valid jira issue.

Warning: The referenced jira issue has an invalid target version for the target branch this PR targets: expected the bug to target the "4.16.0" version, but no target version was set.

In response to this:

Description

The agent IP as deteted by the agent itself could potentially differ from the expected machine network IP, e.g. getting " 192.168.12.2" instead of "10.10.10.2".

But forcing the IP from the operator by inferring its host node IP, we ensure using the correct one

Note that the AGENT_IP env was already implemented on Agent side to override IP detection

Dependencies

n/a

Checklist

If you are not familiar with our processes or don't know what to answer in the list below, let us know in a comment: the maintainers will take care of that.

• Is this PR backed with a JIRA ticket? If so, make sure it is written as a title prefix (in general, PRs affecting the NetObserv/Network Observability product should be backed with a JIRA ticket - especially if they bring user facing changes).
• Does this PR require product documentation?
• If so, make sure the JIRA epic is labelled with "documentation" and provides a description relevant for doc writers, such as use cases or scenarios. Any required step to activate or configure the feature should be documented there, such as new CRD knobs.
• Does this PR require a product release notes entry?
• If so, fill in "Release Note Text" in the JIRA.
• Is there anything else the QE team should know before testing? E.g: configuration changes, environment setup, etc.
• If so, make sure it is described in the JIRA ticket.
• QE requirements (check 1 from the list):
• Standard QE validation, with pre-merge tests unless stated otherwise.
• Regression tests only (e.g. refactoring with no user-facing change).
• No QE (e.g. trivial change with high reviewer's confidence, or per agreement with the QE team).

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes/test-infra repository.

[openshift-ci-robot]

@jotak: This pull request references NETOBSERV-1430 which is a valid jira issue.

Warning: The referenced jira issue has an invalid target version for the target branch this PR targets: expected the bug to target the "4.16.0" version, but no target version was set.

In response to this:

Description

The agent IP as deteted by the agent itself could potentially differ from the expected machine network IP, e.g. getting " 192.168.12.2" instead of "10.10.10.2".

But forcing the IP from the operator by inferring its host node IP, we ensure using the correct one

Note that the AGENT_IP env was already implemented on Agent side to override IP detection

Dependencies

n/a

Checklist

If you are not familiar with our processes or don't know what to answer in the list below, let us know in a comment: the maintainers will take care of that.

• Is this PR backed with a JIRA ticket? If so, make sure it is written as a title prefix (in general, PRs affecting the NetObserv/Network Observability product should be backed with a JIRA ticket - especially if they bring user facing changes).
• Does this PR require product documentation?
• If so, make sure the JIRA epic is labelled with "documentation" and provides a description relevant for doc writers, such as use cases or scenarios. Any required step to activate or configure the feature should be documented there, such as new CRD knobs.
• Does this PR require a product release notes entry?
• If so, fill in "Release Note Text" in the JIRA.
• Is there anything else the QE team should know before testing? E.g: configuration changes, environment setup, etc.
• If so, make sure it is described in the JIRA ticket.
• QE requirements (check 1 from the list):
• Standard QE validation, with pre-merge tests unless stated otherwise.
• Regression tests only (e.g. refactoring with no user-facing change).
• No QE (e.g. trivial change with high reviewer's confidence, or per agreement with the QE team).

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes/test-infra repository.

[openshift-ci-robot]

@jotak: This pull request references NETOBSERV-1430 which is a valid jira issue.

Warning: The referenced jira issue has an invalid target version for the target branch this PR targets: expected the bug to target the "4.16.0" version, but no target version was set.

In response to this:

Description

The agent IP as deteted by the agent itself could potentially differ from the expected machine network IP, e.g. getting " 192.168.12.2" instead of "10.10.10.2".

But forcing the IP from the operator by inferring its host node IP, we ensure using the correct one

Note that the AGENT_IP env was already implemented on Agent side to override IP detection

Dependencies

n/a

Checklist

If you are not familiar with our processes or don't know what to answer in the list below, let us know in a comment: the maintainers will take care of that.

• Is this PR backed with a JIRA ticket? If so, make sure it is written as a title prefix (in general, PRs affecting the NetObserv/Network Observability product should be backed with a JIRA ticket - especially if they bring user facing changes).
• Does this PR require product documentation?
• If so, make sure the JIRA epic is labelled with "documentation" and provides a description relevant for doc writers, such as use cases or scenarios. Any required step to activate or configure the feature should be documented there, such as new CRD knobs.
• Does this PR require a product release notes entry?
• If so, fill in "Release Note Text" in the JIRA.
• Is there anything else the QE team should know before testing? E.g: configuration changes, environment setup, etc.
• If so, make sure it is described in the JIRA ticket.
• QE requirements (check 1 from the list):
• Standard QE validation, with pre-merge tests unless stated otherwise.
• Regression tests only (e.g. refactoring with no user-facing change).
• No QE (e.g. trivial change with high reviewer's confidence, or per agreement with the QE team).

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes/test-infra repository.

[openshift-ci-robot]

@jotak: This pull request references NETOBSERV-1430 which is a valid jira issue.

Warning: The referenced jira issue has an invalid target version for the target branch this PR targets: expected the bug to target the "4.16.0" version, but no target version was set.

In response to this:

Description

The agent IP as deteted by the agent itself could potentially differ from the expected machine network IP, e.g. getting " 192.168.12.2" instead of "10.10.10.2".

But forcing the IP from the operator by inferring its host node IP, we ensure using the correct one

Note that the AGENT_IP env was already implemented on Agent side to override IP detection

Dependencies

n/a

Checklist

If you are not familiar with our processes or don't know what to answer in the list below, let us know in a comment: the maintainers will take care of that.

• Is this PR backed with a JIRA ticket? If so, make sure it is written as a title prefix (in general, PRs affecting the NetObserv/Network Observability product should be backed with a JIRA ticket - especially if they bring user facing changes).
• Does this PR require product documentation?
• If so, make sure the JIRA epic is labelled with "documentation" and provides a description relevant for doc writers, such as use cases or scenarios. Any required step to activate or configure the feature should be documented there, such as new CRD knobs.
• Does this PR require a product release notes entry?
• If so, fill in "Release Note Text" in the JIRA.
• Is there anything else the QE team should know before testing? E.g: configuration changes, environment setup, etc.
• If so, make sure it is described in the JIRA ticket.
• QE requirements (check 1 from the list):
• Standard QE validation, with pre-merge tests unless stated otherwise.
• Regression tests only (e.g. refactoring with no user-facing change).
• No QE (e.g. trivial change with high reviewer's confidence, or per agreement with the QE team).

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes/test-infra repository.

[codecov]

Codecov Report

All modified and coverable lines are covered by tests ✅

Comparison is base (f1e3e9e) 67.33% compared to head (4bd3d9f) 67.48%.
Report is 10 commits behind head on main.

Additional details and impacted files

@@            Coverage Diff             @@
##             main     #512      +/-   ##
==========================================
+ Coverage   67.33%   67.48%   +0.15%     
==========================================
  Files          64       64              
  Lines        7417     7427      +10     
==========================================
+ Hits         4994     5012      +18     
+ Misses       2123     2117       -6     
+ Partials      300      298       -2     

Flag	Coverage Δ
unittests	67.48% <100.00%> (+0.15%)	⬆️

Flags with carried forward coverage won't be shown. Click here to find out more.

☔ View full report in Codecov by Sentry.
📢 Have feedback on the report? Share it here.

[openshift-ci-robot]

@jotak: This pull request references NETOBSERV-1430 which is a valid jira issue.

Warning: The referenced jira issue has an invalid target version for the target branch this PR targets: expected the bug to target the "4.16.0" version, but no target version was set.

In response to this:

Description

The agent IP as deteted by the agent itself could potentially differ from the expected machine network IP, e.g. getting " 192.168.12.2" instead of "10.10.10.2".

But forcing the IP from the operator by inferring its host node IP, we ensure using the correct one

Note that the AGENT_IP env was already implemented on Agent side to override IP detection

Dependencies

n/a

Checklist

If you are not familiar with our processes or don't know what to answer in the list below, let us know in a comment: the maintainers will take care of that.

• Is this PR backed with a JIRA ticket? If so, make sure it is written as a title prefix (in general, PRs affecting the NetObserv/Network Observability product should be backed with a JIRA ticket - especially if they bring user facing changes).
• Does this PR require product documentation?
• If so, make sure the JIRA epic is labelled with "documentation" and provides a description relevant for doc writers, such as use cases or scenarios. Any required step to activate or configure the feature should be documented there, such as new CRD knobs.
• Does this PR require a product release notes entry?
• If so, fill in "Release Note Text" in the JIRA.
• Is there anything else the QE team should know before testing? E.g: configuration changes, environment setup, etc.
• If so, make sure it is described in the JIRA ticket.
• QE requirements (check 1 from the list):
• Standard QE validation, with pre-merge tests unless stated otherwise.
• Regression tests only (e.g. refactoring with no user-facing change).
• No QE (e.g. trivial change with high reviewer's confidence, or per agreement with the QE team).

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes/test-infra repository.

[msherif1234]

changes LGTM but would like this to be tested in dual stack single stack v4 and v6 to ensure no regressions

[openshift-ci-robot]

@jotak: This pull request references NETOBSERV-1430 which is a valid jira issue.

Warning: The referenced jira issue has an invalid target version for the target branch this PR targets: expected the bug to target the "4.16.0" version, but no target version was set.

In response to this:

Description

The agent IP as detected by the agent itself could potentially differ from the expected machine network IP, e.g. getting " 192.168.12.2" instead of "10.10.10.2".

But forcing the IP from the operator by inferring its host node IP, we ensure using the correct one

Note that the AGENT_IP env was already implemented on Agent side to override IP detection

Dependencies

n/a

Checklist

If you are not familiar with our processes or don't know what to answer in the list below, let us know in a comment: the maintainers will take care of that.

• Is this PR backed with a JIRA ticket? If so, make sure it is written as a title prefix (in general, PRs affecting the NetObserv/Network Observability product should be backed with a JIRA ticket - especially if they bring user facing changes).
• Does this PR require product documentation?
• If so, make sure the JIRA epic is labelled with "documentation" and provides a description relevant for doc writers, such as use cases or scenarios. Any required step to activate or configure the feature should be documented there, such as new CRD knobs.
• Does this PR require a product release notes entry?
• If so, fill in "Release Note Text" in the JIRA.
• Is there anything else the QE team should know before testing? E.g: configuration changes, environment setup, etc.
• If so, make sure it is described in the JIRA ticket.
• QE requirements (check 1 from the list):
• Standard QE validation, with pre-merge tests unless stated otherwise.
• Regression tests only (e.g. refactoring with no user-facing change).
• No QE (e.g. trivial change with high reviewer's confidence, or per agreement with the QE team).

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes/test-infra repository.

[openshift-ci-robot]

@jotak: This pull request references NETOBSERV-1430 which is a valid jira issue.

Warning: The referenced jira issue has an invalid target version for the target branch this PR targets: expected the bug to target the "4.16.0" version, but no target version was set.

In response to this:

Description

The agent IP as detected by the agent itself could potentially differ from the expected machine network IP, e.g. getting " 192.168.12.2" instead of "10.10.10.2".

By forcing the IP from the operator by inferring its host node IP, we ensure using the correct one

Note that the AGENT_IP env was already implemented on Agent side to override IP detection

Dependencies

n/a

Checklist

If you are not familiar with our processes or don't know what to answer in the list below, let us know in a comment: the maintainers will take care of that.

• Is this PR backed with a JIRA ticket? If so, make sure it is written as a title prefix (in general, PRs affecting the NetObserv/Network Observability product should be backed with a JIRA ticket - especially if they bring user facing changes).
• Does this PR require product documentation?
• If so, make sure the JIRA epic is labelled with "documentation" and provides a description relevant for doc writers, such as use cases or scenarios. Any required step to activate or configure the feature should be documented there, such as new CRD knobs.
• Does this PR require a product release notes entry?
• If so, fill in "Release Note Text" in the JIRA.
• Is there anything else the QE team should know before testing? E.g: configuration changes, environment setup, etc.
• If so, make sure it is described in the JIRA ticket.
• QE requirements (check 1 from the list):
• Standard QE validation, with pre-merge tests unless stated otherwise.
• Regression tests only (e.g. refactoring with no user-facing change).
• No QE (e.g. trivial change with high reviewer's confidence, or per agreement with the QE team).

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes/test-infra repository.

[nathan-weinberg]

/ok-to-test

[github-actions]

New images:

• quay.io/netobserv/network-observability-operator:d7dd64e
• quay.io/netobserv/network-observability-operator-bundle:v0.0.0-d7dd64e
• quay.io/netobserv/network-observability-operator-catalog:v0.0.0-d7dd64e

They will expire after two weeks.

To deploy this build:

# Direct deployment, from operator repo
IMAGE=quay.io/netobserv/network-observability-operator:d7dd64e make deploy

# Or using operator-sdk
operator-sdk run bundle quay.io/netobserv/network-observability-operator-bundle:v0.0.0-d7dd64e

Or as a Catalog Source:

apiVersion: operators.coreos.com/v1alpha1
kind: CatalogSource
metadata:
  name: netobserv-dev
  namespace: openshift-marketplace
spec:
  sourceType: grpc
  image: quay.io/netobserv/network-observability-operator-catalog:v0.0.0-d7dd64e
  displayName: NetObserv development catalog
  publisher: Me
  updateStrategy:
    registryPoll:
      interval: 1m

[nathan-weinberg]

/label qe-approved

[openshift-ci-robot]

@jotak: This pull request references NETOBSERV-1430 which is a valid jira issue.

Warning: The referenced jira issue has an invalid target version for the target branch this PR targets: expected the bug to target the "4.16.0" version, but no target version was set.

In response to this:

Description

The agent IP as detected by the agent itself could potentially differ from the expected machine network IP, e.g. getting " 192.168.12.2" instead of "10.10.10.2".

By forcing the IP from the operator by inferring its host node IP, we ensure using the correct one

Note that the AGENT_IP env was already implemented on Agent side to override IP detection

Dependencies

n/a

Checklist

If you are not familiar with our processes or don't know what to answer in the list below, let us know in a comment: the maintainers will take care of that.

• Is this PR backed with a JIRA ticket? If so, make sure it is written as a title prefix (in general, PRs affecting the NetObserv/Network Observability product should be backed with a JIRA ticket - especially if they bring user facing changes).
• Does this PR require product documentation?
• If so, make sure the JIRA epic is labelled with "documentation" and provides a description relevant for doc writers, such as use cases or scenarios. Any required step to activate or configure the feature should be documented there, such as new CRD knobs.
• Does this PR require a product release notes entry?
• If so, fill in "Release Note Text" in the JIRA.
• Is there anything else the QE team should know before testing? E.g: configuration changes, environment setup, etc.
• If so, make sure it is described in the JIRA ticket.
• QE requirements (check 1 from the list):
• Standard QE validation, with pre-merge tests unless stated otherwise.
• Regression tests only (e.g. refactoring with no user-facing change).
• No QE (e.g. trivial change with high reviewer's confidence, or per agreement with the QE team).

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the openshift-eng/jira-lifecycle-plugin repository.

[msherif1234]

/lgtm

[jotak]

/approve

[openshift-ci]

[APPROVALNOTIFIER] This PR is APPROVED

This pull-request has been approved by: jotak

The full list of commands accepted by this bot can be found here.

The pull request process is described here

Needs approval from an approver in each of these files:

• OWNERS [jotak]

Approvers can indicate their approval by writing /approve in a comment
Approvers can cancel approval by writing /approve cancel in a comment