New Template: Cisco WLC show redundancy summary and detail

templates/cisco_wlc_ssh_show_redundancy_detail.textfsm

@@ -0,0 +1,18 @@
+Value REDUNDANCY_MGMT_ADDR (\S+)
+Value PEER_REDUNDANCY_MGMT_ADDR (\S+)
+Value REDUNDANCY_PORT_ADDR (\S+)
+Value PEER_REDUNDANCY_PORT_ADDR (\S+)
+Value PEER_SERVICE_PORT_ADDR (\S+)
+Value KEEP_ALIVE_TIMEOUT (\d+)
+Value PEER_SEARCH_TIMEOUT (\d+)
+
+Start
+  ^\s*Redundancy Management IP Address\.*\s+${REDUNDANCY_MGMT_ADDR}\s*$$
+  ^\s*Peer Redundancy Management IP Address\.*\s+${PEER_REDUNDANCY_MGMT_ADDR}\s*$$
+  ^\s*Redundancy Port IP Address\.*\s+${REDUNDANCY_PORT_ADDR}\s*$$
+  ^\s*Peer Redundancy Port IP Address\.*\s+${PEER_REDUNDANCY_PORT_ADDR}\s*$$
+  ^\s*Peer Service Port IP Address\.*\s+${PEER_SERVICE_PORT_ADDR}\s*$$
+  # presently not parsing Switchover History
+  ^\s*Keep Alive Timeout\s+:\s+${KEEP_ALIVE_TIMEOUT}\s+msecs\s*$$
+  ^\s*Peer Search Timeout\s+:\s+${PEER_SEARCH_TIMEOUT}\s+secs\s*$$
+  # presently not parsing Peer Network Routes

templates/cisco_wlc_ssh_show_redundancy_summary.textfsm

@@ -0,0 +1,24 @@
+Value REDUNDANCY_MODE (\S+\s+\S+)
+Value LOCAL_STATE (\S+)
+Value PEER_STATE (\S+\s+\S+)
+Value UNIT (\S+)
+Value UNIT_ID (([\da-fA-F]{2}\:?){6})
+Value REDUNDANCY_STATE (\S+)
+Value MOBILITY_MAC (([\da-fA-F]{2}\:?){6})
+Value REDUNDANCY_PORT (\S+)
+Value BULKSYNC_STATUS (\S+)
+Value AVG_REDUNDANCY_PEER_LATENCY (\d+)
+Value AVG_MGMT_GW_LATENCY (\d+)
+
+Start
+  ^\s+Redundancy Mode\s+=\s+${REDUNDANCY_MODE}\s*$$
+  ^\s+Local State\s+=\s+${LOCAL_STATE}\s*$$
+  ^\s+Peer State\s+=\s+${PEER_STATE}\s*$$
+  ^\s+Unit\s+=\s+${UNIT}\s*$$
+  ^\s+Unit ID\s+=\s+${UNIT_ID}\s*$$
+  ^\s+Redundancy State\s+=\s+${REDUNDANCY_STATE}\s*$$
+  ^\s+Mobility MAC\s+=\s+${MOBILITY_MAC}\s*$$
+  ^\s+Redundancy Port\s+=\s+${REDUNDANCY_PORT}\s*$$
+  ^\s+BulkSync Status\s+=\s+${BULKSYNC_STATUS}\s*$$
+  ^\s*Average Redundancy Peer Reachability Latency\s+=\s+${AVG_REDUNDANCY_PEER_LATENCY}\s+\S+\s+Seconds\s*$$
+  ^\s*Average Management Gateway Reachability Latency\s+=\s+${AVG_MGMT_GW_LATENCY}\s+\S+\s+Seconds\s*$$

templates/index

@@ -4,8 +4,8 @@
 # abc[[xyz]] is expanded to abc(x(y(z)?)?)?, regexp inside [[]] is not supported
 #
 # Rules of Ordering:
-#  - OS in alphbetical order
-#  - Command in length other
+#  - OS in alphabetical order
+#  - Template name in length order
 #  - When Length is the same, use alphabetical order
 #  - Keep space between OS's
 #
@@ -307,9 +307,11 @@ cisco_wlc_ssh_show_advanced_802.11a_channel.textfsm, .*, cisco_wlc_ssh, sh[[ow]]
 cisco_wlc_ssh_show_802.11a_cleanair_config.textfsm, .*, cisco_wlc_ssh, sh[[ow]] 802\.11[ab] cl[[eanair]] c[[onfig]]
 cisco_wlc_ssh_show_interface_detailed_id.textfsm, .*, cisco_wlc_ssh, sh[[ow]] int[[erface]] d[[etailed]] (\S+)
 cisco_wlc_ssh_show_cdp_neighbors_detail.textfsm, .*, cisco_wlc_ssh, sh[[ow]] c[[dp]] neig[[hbors]] det[[ail]]
+cisco_wlc_ssh_show_redundancy_summary.textfsm, .*, cisco_wlc_ssh, sh[[ow]] red[[undancy]] su[[mmary]]
 cisco_wlc_ssh_show_rf-profile_summary.textfsm, .*, cisco_wlc_ssh, sh[[ow]] rf-[[profile]] s[[ummary]]
 cisco_wlc_ssh_show_ap_config_general.textfsm, .*, cisco_wlc_ssh, sh[[ow]] ap con[[fig]] ge[[neral]]
 cisco_wlc_ssh_show_interface_summary.textfsm, .*, cisco_wlc_ssh, sh[[ow]] int[[erface]] s[[ummary]]
+cisco_wlc_ssh_show_redundancy_detail.textfsm, .*, cisco_wlc_ssh, sh[[ow]] red[[undancy]] d[[etail]]
 cisco_wlc_ssh_show_client_detail.textfsm, .*, cisco_wlc_ssh, sh[[ow]] cl[[ient]] det[[ail]]
 cisco_wlc_ssh_show_exclusionlist.textfsm, .*, cisco_wlc_ssh, sh[[ow]] ex[[clusionlist]]
 cisco_wlc_ssh_show_ap_image_all.textfsm, .*, cisco_wlc_ssh, sh[[ow]] ap ima[[ge]] a[[ll]]

tests/cisco_wlc_ssh/show_redundancy_detail/cisco_wlc_ssh_show_redundancy_detail.raw

@@ -0,0 +1,21 @@
+Redundancy Management IP Address................. 10.128.1.2
+Peer Redundancy Management IP Address............ 10.128.1.3
+Redundancy Port IP Address....................... 169.254.1.2
+Peer Redundancy Port IP Address.................. 169.254.1.3
+Peer Service Port IP Address..................... 0.0.0.0
+
+Switchover History[1]:
+Previous Active = 10.128.1.3, Current Active = 10.128.1.2
+Switchover Reason = Active controller failed, Switchover Time = Tue Nov 24 19:24:43 2020
+
+
+Redundancy Timeout Values.....:
+----------------------------------------------------
+Keep Alive Timeout    : 100 msecs
+Peer Search Timeout   : 120 secs
+
+
+Number of Routes................................. 0
+
+Destination Network          Netmask               Gateway
+-------------------    -------------------   -------------------

tests/cisco_wlc_ssh/show_redundancy_detail/cisco_wlc_ssh_show_redundancy_detail.yml

@@ -0,0 +1,9 @@
+---
+parsed_sample:
+  - redundancy_mgmt_addr: "10.128.1.2"
+    peer_redundancy_mgmt_addr: "10.128.1.3"
+    redundancy_port_addr: "169.254.1.2"
+    peer_redundancy_port_addr: "169.254.1.3"
+    peer_service_port_addr: "0.0.0.0"
+    keep_alive_timeout: "100"
+    peer_search_timeout: "120"

tests/cisco_wlc_ssh/show_redundancy_summary/cisco_wlc_ssh_show_redundancy_summary.raw

@@ -0,0 +1,11 @@
+            Redundancy Mode = SSO ENABLED 
+                Local State = ACTIVE 
+                 Peer State = STANDBY HOT 
+                       Unit = Primary
+                    Unit ID = 00:00:00:00:12:34
+           Redundancy State = SSO
+               Mobility MAC = 00:00:00:00:12:34
+               Redundancy Port  = UP
+            BulkSync Status = Complete
+Average Redundancy Peer Reachability Latency = 199 Micro Seconds
+Average Management Gateway Reachability Latency = 570 Micro Seconds

tests/cisco_wlc_ssh/show_redundancy_summary/cisco_wlc_ssh_show_redundancy_summary.yml

@@ -0,0 +1,13 @@
+---
+parsed_sample:
+  - redundancy_mode: "SSO ENABLED"
+    local_state: "ACTIVE"
+    peer_state: "STANDBY HOT"
+    unit: "Primary"
+    unit_id: "00:00:00:00:12:34"
+    redundancy_state: "SSO"
+    mobility_mac: "00:00:00:00:12:34"
+    redundancy_port: "UP"
+    bulksync_status: "Complete"
+    avg_redundancy_peer_latency: "199"
+    avg_mgmt_gw_latency: "570"