srccheck: a utility to KALOI (Keep a Lid On It) source code on various metrics supported by SciTools Understand.

Pre-requisites

• This utility is written in Python 3. You will need a Python 3 interpreter installed or you will have to package this into a self contained executable.
• This utility uses SciTools Understand. You will need a valid license of Understand in your machine so you can use this script. This script uses a UDB file as input.
• (optional) Jenkins
• (optional) SONAR

What It Does

You can use srccheck to fail your build (say in Jenkins) if a specific metric goes beyond a threshold you define. It could be routine cyclomatic complexity, it could be max number of methods in a class, and so on. Basically any Understand Metric can be used. And it supports many programming languages (Java, C++, Python, etc).

NOTE: There is one extra metric that Understand does not have natively but we do support: CountParams, for routines/functions/methods. It represents the number of parameters a routine/function/method takes.

Beyond that, you can keep a trend dashboard of your metrics over time. For that, you need to have Jenkins installed and its Plot Plugin installed as well. srccheck can generate the CSV file that this plugin requires (see our --outputCSV= command-line parameter).

For a radial (kiviat) view of the current values and the max values of the metrics, the script also outputs a png with the same name as the UDB file (just different file extension). Here is an example:

If the green values are higher, you are ok. If the orange values are higher, you blew past the maximum allowed value for the metric.

Note that the exit code of srccheck is the number of violations found. This allows you to incorporate srccheck into your workflow regardless of the build tool used.

If you want to publish some metrics as a dashboard in SONAR, you can also do it. For that, you must first register your custom metrics in SONAR, which will differ in versions prior to 5.2 and after 5.2:

SONAR 5.1 and below

You need to set up Manual Measures in SONAR and srccheck will use its Manual Measures API. The steps are:

• Login into SONAR as Administrator
• Configuration/Manual Measures
• Add Measure

SONAR 5.2 and above

You need to set up Custom Measures in SONAR and srccheck will use this API. The steps are:

• Login into SONAR as Administrator
• Go to Administration > Configuration > Custom Metrics
• Create Metric

NOTE: you can also break your build using SONAR's Build Breaker Plugin if you prefer.

How to Install srccheck

Make sure your Python has paver installed (pip3 install paver) and then run:

pip3 install git+https://github.com/sglebs/srccheck

Under Linux, some users reported that you need to install some libraries before running:

• Ubuntu: sudo apt-get install python3-tk
• CentOS: yum install python3-tkinter

How to Upgrade srccheck

pip3 install --upgrade git+https://github.com/sglebs/srccheck

How to Install It Standalone On a Machine Without Python

You can generate a self-contained executable that does not need a python interpreter on the target machine:

pip3 install pyinstaller
pyinstaller --exclude-module understand -F utilities/srccheck.py 

Now your dist directory should have a standalone native executable which you can copy to a different machine.

Docker Image

This utility is also provided as a Docker image. Usage documentation can be accessed here.

How to Run It

Execute srccheck --help to see what the options are. Basically we take 4 different JSONs as input, which define:

• --maxPrjMetrics , which defines the maximum allowed value for metrics that apply to the project as a whole.
• --maxFileMetrics , which defines the maximum allowed value for metrics that apply to individual files.
• --maxClassMetrics , which defines the maximum allowed value for metrics that apply to individual classes.
• --maxRoutineMetrics , which defines the maximum allowed value for metrics that apply to individual routines (methods, functions, procedures, etc).

These JSONs are each a dictionary, where each key is the name of the metric and the value is the maximum value it can take. Anything above is considered a violation.

NOTE: instead passing literal json values you can also pass file paths to json files.

Examples

Here is an example used to analyze Delphi code:

C:\>srccheck --in="C:\temp\PJ_DIARIO.udb" --maxFileMetrics={\"CountLineCode\":5000,\"CountDeclFunction\":40,\"CountDeclClass\":5} --maxClassMetrics={\"CountDeclMethod\":50,\"MaxInheritanceTree\":6}
--maxRoutineMetrics={\"CountLineCode\":1000,\"CountParams\":20,\"CyclomaticStrict\":24,\"CyclomaticModified\":12} --maxPrjMetrics={\"AvgCyclomatic\":2,\"MaxNesting\":5} --regexIgnoreFiles="tlb|[.]dfm" --regexIgnoreRoutines="ExecutaMetodoServidor|Invoke" --verbose

(Note that under the Windows shell you need to escape each " with a \ , as we show above).

If the command above fails, you may need to pass an appropriate --dllDir value. Or set PATH and PYTHONPATH:

C:\>set PYTHONPATH=C:\Program Files\SciTools-4.0.860-64b\bin\pc-win64\python

C:\>set PATH=%PATH%;C:\Program Files\SciTools-4.0.860-64b\bin\pc-win64

Here is an example that analyzes C++ code, using the defaults we provide:

srccheck --in=c:\temp\BlackJack.udb --sonarUser=admin --sonarPass=admin --sonarURL=http://localhost:9000/api/manual_measures --sonarPrj=BlackJack 

Here is a full example which installs srccheck in your global Python interpreter, gets SciTools Understand, gets the source code for junit, invokes understand on its sources and then our tool:

sudo pip3 install --upgrade pip
sudo pip3 install paver
sudo pip3 install git+https://github.com/sglebs/srccheck
wget http://builds.scitools.com/all_builds/b864/Understand/Understand-4.0.864-Linux-64bit.tgz
tar xvf Understand-4.0.864-Linux-64bit.tgz
# make sure und is in the PATH
export PATH=$PATH:./scitools/bin/linux64/
git clone https://github.com/junit-team/junit.git
# run Understand from the GUI to activate the trial
understand
# now we can automate
und create -languages java junit.udb
und add ./junit/src/main/java/junit junit.udb
und analyze junit.udb
srccheck --dllDir=./scitools/bin/linux64/Python --in=junit.udb --maxFileMetrics='{"CountLineCode":500,"CountDeclFunction":30,"CountDeclClass":1}' --maxClassMetrics='{"CountDeclMethod":20,"MaxInheritanceTree":4}' --maxRoutineMetrics='{"CountLineCode":80,"CountParams":7,"CyclomaticModified":7}' --maxPrjMetrics='{"AvgCyclomaticModified":3,"MaxNesting":5}' --verbose

(Note that under the Linux shell you need to single-quote the json values and there is no need to escape each " with a \ like you do under Windows)

Averages and variances

Understand does provide some metrics for averages. The problem is that these do not take into account our whitelist or blacklist of files. Also, not all metrics have Stdev, Avg etc equivalents. In order to fix this we added support to compute a few derived stats metrics on any existing metric, using prefixes. They are:

• AVG (uses statistics.mean)
• MEDIAN (uses statistics.median)
• MEDIANGROUPED (uses statistics.median_grouped)
• MEDIANHIGH (uses statistics.median_high)
• MEDIANLOW (uses statistics.median_low)
• MODE (uses statistics.mode)
• STDEV (uses statistics.pstdev)
• VARIANCE (uses statistics.pvariance)

Example: {CyclomaticModified":10, "STDEV:CyclomaticModified":1.8, "AVG:CyclomaticModified":2.2}

The example above will raise an issue if the maximum CyclomaticModified goes above 10, but also if the average goes above 2.2 or the standard deviation goes above 1.8. This allows you to control not only maximum values of your outliers, but also averages and the spread (how far off they spread). We use the stats functions in https://docs.python.org/3/library/statistics.html .

Synthetic Metrics

There are currently 2 synthetic metrics not directly supported by Understand but supported by srccheck:

• CountParams : Valid for functions/methods/routines. Represents the number of parameters declared as input to a method / function.
• CountDeclMethodNonStub : See #39. Valid for methods. Represents the number of methods declared in a class excluding getters/setters and stubs alike.

Adaptive KALOI

As you evolve your code and improve your metrics, the max values used in the command-line to srchcheck will probably need to be revisited and adjusted, to keep your metric improvement initiative steady. This process requires adjusting build scripts, and can be tedious. Because of this, srccheck has adaptive support: it automatically lowers the maximum value accepted for the metric to the new, improved value, every time you manage to lower the current max value of that metric.

To make use of this feature, you will need two things:

• use the -a flag (enables the adaptive behaviour)
• pass file paths to json files instead of literal values to these parameters: --maxPrjMetrics , --maxFileMetrics, --maxClassMetrics, --maxRoutineMetrics

The json files will be modified in-place by srccheck with the new max limits, lowering the ones you managed to lower. You are using srccheck to "lower the lid" of your KALOI initiative. Example:

srccheck --dllDir=/Applications/Understand.app/Contents/MacOS/Python --in=/Users/mqm/Downloads/messenger-server.udb --maxFileMetrics=./messenger-server/maxFileMetrics.json --maxClassMetrics=./messenger-server/maxClassMetrics.json --maxRoutineMetrics=./messenger-server/maxRoutineMetrics.json --maxPrjMetrics=./messenger-server/maxPrjMetrics.json -a

If you run the command above and maxFileMetrics.json has this in it: {"AVG:CountDeclClass": 999, "CountDeclClass": 999, "STDEV:CountDeclClass": 999} then after the run it will look like this: {"AVG:CountDeclClass": 3.3, "CountDeclClass": 30, "STDEV:CountDeclClass": 5.78013840664737}

If we manage to lower the maximum number of classes a file can have (CountDeclClass) from 30 to 28, then 28 will automatically become the new maximum acceptable value for this metric, thanks to the -a flag.

Histograms

Sometimes metric values are very high and we want to visualize how the values are spread and their frequencies. With that in mind we added support to generate histograms from srccheck. The relevant flags are:

• -H : enables histogram generation
• -l : use the logarithmic scale (default is false - linear scale is the default)
• -m : show the mean (avg) and median as two vertical lines in the graph

PNG files will be generated in the current dir, with the various histograms.

If you just want to see the histograms without worrying about metric limits, the srchistplot tool is bundled in and can be used - it plots histograms of the values found for the metric(s) you choose. It is similar to srccheck to run, with some minor differences. One of them is that you pass a comma-separated list of metric names for File, Class and Routine (and not max values as a json, as with srccheck itself). It also takes these same flags as above: -l , -m.

Here's how to just plot histograms for some metrics for the Django project:

srchistplot --dllDir=/Applications/Understand.app/Contents/MacOS/Python --in=/Users/mqm/Downloads/django.udb --fileMetrics=CountLineCode,CountDeclFunction,CountDeclClass --classMetrics=CountDeclMethod,MaxInheritanceTree --routineMetrics=CountLineCode,CountParams,CyclomaticStrict -l

One of the files that the line above will output will look like this:

Scatter Plots

If you want to see how 2 metrics correlate, you can produce a scatter plot with the srcscatterplot tool, also bundled in. It accepts a JSON (literal or file path) where keys are scope names (either File or Class or Routine) and an arrays of configs (so you can generate multiple plots for each scope). Each config should have these keys (all optional, with defaults):

• xMetric: name of the Understand metric to collect for the X axis. Default: CountLineCode
• yMetric: name of the Understand metric to collect for the Y axis. Default: MaxCyclomaticModified
• ballMetric: name of the Understand metric to collect for the circle sizes. Default: MaxNesting
• ballSizeMin: Minimum size of the circles, even if the metric is 0. Default: 40
• ballSizeMax: Maximum size of the circles, even if the metric is very very large. Default: 4000
• ballSizeRate: How many units of size the circle grows per unit of the metric. Default: 10
• xMetricMinValue: Elements will be potentially discarded if the x metric is below this threshold. Default: 0.
• yMetricMinValue: Elements will be potentially discarded if the y metric is below this threshold. Default: 0.
• ballMetricMinValue: Elements will be potentially discarded if the ball metric is below this threshold. Default: 0.

NOTE: for the Min Values above, an element will only be discarded if all 3 metrics (x, y, ball) are all below their corresponding minimal values.

Here's an example for Django sources, using the defaults:

srcscatterplot --dllDir=/Applications/Understand.app/Contents/MacOS/Python --in=/Users/mqm/Downloads/django.udb

The plot will be an html file, interactive - you can roll your mouse on a circle and it will show which element that is. (Not above - that's a screenshot).

Two items will have the same color if they belong to files in the same directory. This means that colors represent clustering/packaging, usually.

Run srcscatterplot -h to see details for the parameters it can take.

OO Instability and Abstractness Plots

Bob Martin's whitepaper "OO Design Quality Metrics - An Analysis of Dependencies" describes two metrics - Instability and Abstractness - and how a good arquitecture should look like in such a graph. Some tools like PHP_Depend have support for it, as shown at https://pdepend.org/documentation/handbook/reports/abstraction-instability-chart.html

We include a utility that can take a CSV as input, containing these values, and can plot such a graph: srcinstplot. Example:

srcinstplot --in=instability-myProject.csv 

The CSV file should look like this:

Component,CountLineCode,SumCyclomaticModified,Efferent Coupling,Afferent Coupling,Instability,Classes,Abstract Classes,Abstractness,Distance,Normalized Distance, Distance Percentage
foo.bar,44,2,0,6,0.000000,2,0,0.000000,0.707107,1.000000, 100
... 
...

The Component column will have the names of your components - package names (Java) or namespace names (C#) or Units (Pascal). The second and third column can have any names - they should represent metrics for Size (circle sizes in the graph) and Complexity (circle colors in the graph).

The result should look like the graph below.

If you roll the mouse on the circles, their names are shown, as well as the metrics that represent the circle size and the circle color. Run the utility with -h for a detailed description of the parameters.

We also have a tool - geninstability - which generates such CSV files from an Understand UDB file, but it is not Open Source. Feel free to contact us if you would like to use it. On the other hand, if your system is written in Java, you can produce an XML with the data using JDepend and convert from it to a CSV using the included jd2csv and totally bypass Understand.

Considering that the bigger the distance from the mean diagonal line the worse the situation, you may want to visualize the distances in a histogram, to properly prioritize the refactorings. A sample histogram can be seen below:

It was generated as follows:

csvhistplot --in=instability-myProject.csv -m

You can enforce the KALOI principle for OO Instability and Abstractness by using the csvkaloi utility on the csv produced by geninstability:

csvkaloi --in=instability-myproject.csv --maxMetrics="{\"MEDIAN:Distance Percentage\":40}"

The command above defines that 50% of your components (MEDIAN) should not be too far from the main line - 40% distance, maximum. Restricting the MEDIAN (and possibly the standard deviation - STDEV:) one can ensure a good use of APIs and the Dependency Inversion Principle.

Diff Plots

"How do projects get late? One day at a time!" https://en.wikipedia.org/wiki/The_Mythical_Man-Month

And how do projects become legacies and a big ball of mud? One commit at a time!

In order to help you keep an eye on what changed from one version to another, we added the ability to plot what changed from one version of your sofware to another, by pointing at two different UDB files which represent the before & after states.

The example below shows what changed in lines of code (CountLineCode) of methods from JUnit 4.9 to 4.12. If the metric increased, it will be in red and above the diagonal. If the metric decreased, it will be in green and below the diagonal. If you hover on the circles it will show the name of the element (not active below - it's just a screenshot).

The plot was generated like this:

srcdiffplot --before=junit-before.udb --after=junit-after.udb --dllDir=/Applications/Understand.app/Contents/MacOS/Python --ballSize=200 --minChange=2

If you run srcdiffplot with -h it will show you all the parameters.

In order to generate different UDBs from different git tags, you can do this:

mkdir tmp
cd tmp
git clone https://github.com/junit-team/junit.git
cd junit
git checkout tags/r4.9
und create -languages java ../before.udb
und add ./src/main/java/junit ../before.udb
und analyze ../before.udb
git checkout tags/r4.12
und create -languages java ../after.udb
und add ./src/main/java/junit ../after.udb
und analyze ../after.udb

A kiviat is also generated, for project metrics: use the --prjMetrics parameter. In the case of comparing jUnit 4.9 against 4.12, we get this kiviat:

The tool will also print project growth rates for the metrics you selected with the --prjMetrics parameter. Example:

Metric Growth Rate in Project
--------------------------------------
AvgCyclomatic:	1.000000
AvgLineCode:	1.137255
CountDeclClass:	1.000000
CountDeclFile:	1.000000
CountDeclMethod:	1.161491
CountLineCode:	1.137311
CountPath:	1.097561
CountStmt:	1.068467
Cyclomatic:	1.111111
Essential:	1.137324
MaxCyclomatic:	1.000000
MaxEssential:	1.000000
MaxNesting:	1.000000
SumCyclomatic:	1.111111

These rates can also be posted to SONAR, using the --sonarPrj parameter. If you want to break the build if the growth rate of a metric is too large, you can use the Build Breaker Plugin. Note that first you will need to create custom measures as explained at the top of this document, for srccheck. Make sure to create them of kind Size and type FLOAT in SONAR. The metric key names for diffs should be:

prj_XXX_growth_rate

where XXX is the name of the metric for SciTools Understand, all lowercase. Example: prj_avgcyclomatic_growth_rate for diffs of AvgCyclomatic.

Special Thanks

We would like to thank Softplan (Anderson Soffa) and Nexxera (Gustavo Soares) for their partial support of the development of these utilities.