Skip to content

nightslide7/Gameboy

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

18-545

18-545 Fighting Meerkats

Project: The Game Boy

Elon Bauer
Joseph Carlos
Alice Tsai

This is our 18-545 project, a mostly working original Game Boy on an FPGA.

Structure

The main piece of documentation for our system is the final project writeup, which is (shockingly and amazingly) Gameboy_Final_Report.pdf.

There are two top-level ISE projects. GAMEBOY_TOP works with the actual cartridge, and GAMEBOY_TOP_SIMPLE works with a "flashcart" which is a ROM with the bootstrap code appended to the front of it.

The actual top-level verilog module is lcd_top.v which is located in cpu/cpusynth for GAMEBOY_TOP, and in GAMEBOY_TOP_SIMPLE for that project. This is called lcd_top because we were using the code given in Lab 1 to control the LCD screen and never got around to changing the name. And it would break everything if we did it now.

lcd_top instantiates all the modules that make up the Game Boy, including the CPU, the GPU, the DVI module, the audio interface, the cartridge interface, the NES controller, the rotary controller, timers, DMA, clock dividers, and the link cable.

The code for the cpu is located in the cpu folder. Everything relating to the CPU is located here except the header file cpu.vh which had to be in the top- level directory. The auto_testbench is also included here, along with the bootstrap flash files and some Perl scripts to convert hex files.

The code for the GPU is located in the fpgaboy_files folder. Everything relating to the GPU including the DVI module is located here, except for the block RAM IP cores, which are located in the GPU_IP/ipcore_dir folder.

The code for the audio interface is located in the sound_src folder. Everything relating to sound production including the setup of the AC97 codec is located here, except for the rotary controller which is a top level file.

All other modules are located at the top level. These include the rotary controller, the NES controller, the cartridge interface, the clock divider, the tristate module, and the link cable.

Testing Utilities

Most unit test projects are located in the top-level directory in a folder ending in _test. The CPU uses the auto_testbench as well as roms in the roms folder and dmg_emu folder.

The automatic testbench is found in auto_testbench and relies on the config.bat batch file to setup the Xilinx toolchain and gbdk. It sets the path to include gbdk and calls the Xilinx setup batch file. Unfortunately, I don't know where these things are on anyone else's system so you'll have to edit the gbdk and Xilinx setup script paths in the config.bat file for it to work on your system.

After running config.bat, you can use the ROM generation batch file found in roms/gb or run the automatic testbench. Running the automatic testbench can be done with run_all_sub.bat, which takes a single assembly file as an argument. It creates a new directory for the test. It can be run multiple times on an assembly file from the top directory and it won't overwrite the test directory but simply re-run the test in that directory. In the created test directory there should be a compiled executable and a waveform preferences file copied from util so that you can look at all the useful CPU signals when something goes awry.

ROM Generation

Generating Xilinx .mcs files for the board is somewhat of an adventure. In roms/gb there are three scripts, dat2hex.pl, gb2flashcart.bat, and hex2dat.pl.

dat2hex.pl converts Verilog-readable memory list files (bytes followed by newlines) to "hex" files, which are just memory list files with the bytes repeated (because our flash was 16 bits and we didn't want to deal with doing anything smarter than just reading the bottom 8 bits of each address).

hex2dat.pl converts binary files to Verilog-readable machine code list files.

gb2flashcart.bat takes a .gb file as input and spits out a .mcs file. It does this by converting the .gb binary file to a machine code list file, then appending bootstrap.dat (the machine code list for the bootstrap) to that. It then converts that long file into a "hex" file (each byte of machine code repeated twice for each 16-bit word of the flash). It takes that and generates a .mcs file that can be loaded onto the board.

The resulting flash ROM will look something like

0x0000: 3131
0x0001: FEFE
0x0002: FFFF
...

This is so we can just hook up the address bus to the flash address lines without having to address the top or bottom byte of the flash address based on whether the address is odd or not. We basically just treat the flash as having 8-bit-wide data rather than having 16-bit-data.

This is memory-inefficient, but we did it like this initially to save headaches, and never got around to changing it.

About

18-545 Fighting Meerkats

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published