Skip to content

Suggested best practices when writing Jest unit tests in TypeScript (Angular)

Notifications You must be signed in to change notification settings

nikeshghimire77/unit-testing-styleguide

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

8 Commits
 
 
 
 

Repository files navigation

Front End Unit Testing Style Guide

BDD with Jest/Jasmine/Mocha for TypeScript/Angular

Purpose

The purpose of this style guide is to offer suggested best practices when writing Front End unit tests using Jest, Jasmine or Mocha. Though this Style Guide is written specifically for using with TypeScript and Angular, most of its concepts can be applied to testing under a wide range of different JavaScript technologies and code bases.

Introduction

Jest is the spec-style unit testing library following Behaviour Driven Development (BDD) principles. It's API is almost fully compatible with Jasmine and Mocha API, so the basic principles described here can be used for all the three mentioned unit testing frameworks. This document governs three main parts of the unit testing process for the needs of Front End Development:

Best practices for providing code testability

  1. All the code architecture should follow the Single Responsibility Principle to achieve Separation of Concerns inside of it
  2. API methods should not be tightly coupled with the specific implementation (data sources)
  3. Pure functions should be preferred when writing the API methods
  4. Methods should be decomposed as much as possible
  5. Business logic should be delegated from components to services as much as possible
  6. All the API methods and properties should use types/enums/interfaces (including method attributes and return values)
  7. Code inside a file should be documented ("as much as needed but not more" (c) Albert Einstein) prior to be tested

Requirements for test coverage

  1. Priority chain for code base test coverage: CORE -> SHARED -> MODULES
  2. All the components and services should be covered with smoke tests (at least)
  3. Service API should be covered with tests
  4. Only the publicly-exposed API should be tested

Environment-related requirements

  1. Each *.spec.ts file with specific test suite in it should be placed alongside the component/service/etc being tested and named accordingly
  2. Uppermost describe block of the test suite should be named after component/service/etc being tested to find the source of fail faster after test runs
  3. Test should be run in isolation - all the dependencies should be doubled (mocked/stubbed)
  4. Avoid mocks (focusing on internals) in favor of stubs and spies (focusing on requirements/specific functionality)
  5. Minimize external helpers and abstractions
  6. Avoid global test fixtures and seeds, add data per-test
  7. Use Angular utilities (from @angular/core/testing) to pre-compile the Angular-specific code (e.g. TestBed and ComponentFixture for scaffolding, async for make compilation asynchronous and wait for it) and get access to internals of the pre-compiled test fixtures (e.g. detectChanges which isn't run automatically, or debugElement which allows to access DOM and produce events)

Rules for writing the tests

  1. Testing Is Easy
  2. Speak Human
  3. Write Unit Tests
  4. Arrange-Act-Assert
  5. Don't Repeat Yourself
  6. this Is How We Do It
  7. Avoid the Alls
  8. Be describetive
  9. Write Minimum Passable Tests
  10. Randomize input data

Testing Is Easy

Don't be afraid to write unit test, and don't overthink the process:

  1. describe what your testing. This is your test suite.
  2. it should have some expected behaviors. These are your specs.
  3. expect or assert these behaviors to hold true. These are your expectations
describe('MyAwesomeComponent', () => {
  beforeEach( () => {
    // reproduce the test state
  })

  it('should be awesome', () => {
    expect(component).toBe(awesome)
  });

  // More specs here

})

Speak Human

Label your test suites (describe blocks) and specs (it blocks) in a way that clearly conveys the intention of each unit test. Note that the name of each test is the title of its it preceded by all its parent describe names. Favor assertive verbs and avoid ones like "should."

Why?

  • Test suite becomes documentation for your codebase (helpful for new team members and non-technical stakeholders)
  • Failure messages accurately depict what is broken
  • Forces good naming conventions in tested code

Bad:

// Output: "Array adds to the end"
describe('Array', () => {
  it('adds to the end', () => {
    const initialArray = [1];
    initialArray.push(2);
    expect(initialArray).toEqual([1, 2]);
  });
});

Better:

// Output: "Array.prototype .push(x) appends x to the end of the Array"
describe('Array.prototype', () => {
  describe('.push(x)', () => {
    it('appends x to the end of the Array', () => {
      const initialArray = [1];
      initialArray.push(2);
      expect(initialArray).toEqual([1, 2]);
    });
  });
});

Write Unit Tests

A unit test should test one thing. Confine your it blocks to a single assertion.

Why?

  • Single responsibility principle
  • A test can fail for only one reason

Bad:

describe('Array.prototype', () => {
  describe('.push(x)', () => {
    it('appends x to the end of the Array and returns it', () => {
      const initialArray = [1];
      expect(initialArray.push(2)).toBe(2);
      expect(initialArray).toEqual([1, 2]);
    });
  });
});

Better:

describe('Array.prototype', () => {
  describe('.push(x)', () => {
    it('appends x to the end of the Array', () => {
      const initialArray = [1];
      initialArray.push(2);
      expect(initialArray).toEqual([1, 2]);
    });

    it('returns x', () => {
      const initialArray = [1];
      expect(initialArray.push(2)).toBe(2);
    });
  });
});

Arrange-Act-Assert

Organize your code in a way that clearly conveys the 3 A's of each unit test. One way to accomplish this is by Arranging and Acting in before blocks and Asserting in it ones.

Why?

  • The AAA unit test pattern is well known and recommended
  • Improves unit test modularity and creates opportunities to DRY things up

Bad:

describe('Array.prototype', () => {
  describe('.push(x)', () => {
    it('appends x to the end of the Array', () => {
      const initialArray = [1];
      initialArray.push(2);
      expect(initialArray).toEqual([1, 2]);
    });
  });
});

Better:

describe('Array.prototype', () => {
  describe('.push(x)', () => {
    let initialArray;

    beforeEach(() => {
      initialArray = [1]; // Arrange

      initialArray.push(2); // Act
    });

    it('appends x to the end of the Array', () => {
      expect(initialArray).toEqual([1, 2]); // Assert
    });
  });
});

Don't Repeat Yourself

Use before/after blocks to DRY up repeated setup, teardown, and action code.

Why?

  • Keeps test suite more concise and readable
  • Changes only need to be made in one place
  • Unit tests are not exempt from coding best practices

Bad:

describe('Array.prototype', () => {
  describe('.push(x)', () => {
    it('appends x to the end of the Array', () => {
      const initialArray = [1];
      initialArray.push(2);
      expect(initialArray).toEqual([1, 2]);
    });

    it('returns x', () => {
      const initialArray = [1];
      expect(initialArray.push(2)).toBe(2);
    });
  });
});

Better:

describe('Array.prototype', () => {
  describe('.push(x)', () => {
    let initialArray,
        pushResult;

    beforeEach(() => {
      initialArray = [1];

      pushResult = initialArray.push(2);
    });

    it('appends x to the end of the Array', () => {
      expect(initialArray).toEqual([1, 2]);
    });

    it('returns x', () => {
      expect(pushResult).toBe(2);
    });
  });
});

this Is How We Do It

Use this to share variables between it and before/after blocks.

Why?

  • Declare and initialize variables on one line
  • Most testing frameworks automatically clean the this object between specs to avoid state leak

Bad:

describe('Array.prototype', () => {
  describe('.push(x)', () => {
    let initialArray,
        pushResult;

    beforeEach(() => {
      initialArray = [1];

      pushResult = initialArray.push(2);
    });

    it('appends x to the end of the Array', () => {
      expect(initialArray).toEqual([1, 2]);
    });

    it('returns x', () => {
      expect(pushResult).toBe(2);
    });
  });
});

Better:

describe('Array.prototype', () => {
  describe('.push(x)', () => {
    beforeEach(() => {
      this.initialArray = [1];

      this.pushResult = this.initialArray.push(2);
    });

    it('appends x to the end of the Array', () => {
      expect(this.initialArray).toEqual([1, 2]);
    });

    it('returns x', () => {
      expect(this.pushResult).toBe(2);
    });
  });
});

Avoid the Alls

Prefer beforeEach/afterEach blocks over beforeAll/afterAll ones. The latter are not reset between tests.

Why?

  • Avoids accidental state leak
  • Enforces test independence
  • Order of All block execution relative to Each ones is not always obvious

Bad:

describe('Array.prototype', () => {
  describe('.push(x)', () => {
    beforeAll(() => {
      this.initialArray = [1];
    });

    beforeEach(() => {
      this.pushResult = this.initialArray.push(2);
    });

    it('appends x to the end of the Array', () => {
      expect(this.initialArray).toEqual([1, 2]);
    });

    it('returns x', () => {
      expect(this.pushResult).toBe(2);
    });
  });
});

Better:

describe('Array.prototype', () => {
  describe('.push(x)', () => {
    beforeEach(() => {
      this.initialArray = [1];

      this.pushResult = this.initialArray.push(2);
    });

    it('appends x to the end of the Array', () => {
      expect(this.initialArray).toEqual([1, 2]);
    });

    it('returns x', () => {
      expect(this.pushResult).toBe(2);
    });
  });
});

Be describetive

Nest describe blocks liberally to create functional subsets.

Why?

  • Allows tests to build on each other from least to most specific
  • Creates tests that are easy to extend and/or refactor
  • Makes branch testing easier and less repetitive
  • Encapsulates tests based on their common denominator

Bad:

describe('Array.prototype', () => {
  describe('.push(x) on an empty Array', () => {
    beforeEach(() => {
      this.initialArray = [];

      this.initialArray.push(1);
    });

    it('appends x to the Array', () => {
      expect(this.initialArray).toEqual([1]);
    });
  });

  describe('.push(x) on a non-empty Array', () => {
    beforeEach(() => {
      this.initialArray = [1];

      this.initialArray.push(2);
    });

    it('appends x to the end of the Array', () => {
      expect(this.initialArray).toEqual([1, 2]);
    });
  });
});

Better:

describe('Array.prototype', () => {
  describe('.push(x)', () => {
    describe('on an empty Array', () => {
      beforeEach(() => {
        this.initialArray = [];

        this.initialArray.push(1);
      });

      it('appends x to the Array', () => {
        expect(this.initialArray).toEqual([1]);
      });
    });

    describe('on a non-empty Array', () => {
      beforeEach(() => {
        this.initialArray = [1];

        this.initialArray.push(2);
      });

      it('appends x to the end of the Array', () => {
        expect(this.initialArray).toEqual([1, 2]);
      });
    });
  });
});

Write Minimum Passable Tests

If appropriate, use test framework's built-in matchers (such as .toContain, .any, .stringMatching, etc) to compare arguments and results. You can also create your own custom matcher functions.

Why?

  • Tests become more resilient to future changes in the codebase
  • Closer to testing behavior over implementation

Bad:

describe('Array.prototype', () => {
  describe('.push(x)', () => {
    beforeEach(() => {
      this.initialArray = [];

      this.initialArray.push(1);
    });

    it('appends x to the Array', () => {
      expect(this.initialArray).toEqual([1]);
    });
  });
});

Better:

describe('Array.prototype', () => {
  describe('.push(x)', () => {
    beforeEach(() => {
      this.initialArray = [];

      this.initialArray.push(1);
    });

    it('appends x to the Array', () => {
      expect(this.initialArray).toContain(1);
    });
  });
});

Randomize input data

Avoid using "foo", use realistic complex input data instead ("$%JAFADF1313**@")

Why?

  • Data complexity related bugs are caught earlier this way

Contributing

This style guide ultimately represents the opinions of its contributors. If you disagree with anything, or wish to add more, please create an issue or submit a pull request. Our goal is to continuously improve the guide and build consensus around it.

About

Suggested best practices when writing Jest unit tests in TypeScript (Angular)

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published