Meta-radxa

Table of contents

1. Introduction
2. Dependencies
3. List of Radxa Boards supported
4. Using the meta-radxa layer
   1. Step 1:Fetching the Source
   2. Step 2:Setting up the Environment
   3. Step 3:Bblayers.conf Setup
   4. Step 4:Local.conf Setup
   5. Step 5:Building the Image
5. Serial Console
6. Login Details
7. Networking
   1. Wifi Connectivity
   2. Bluetooth Connectivity
8. Release Info
9. Change Log
10. Contributing
11. Reporting Bugs
12. Maintainers

Introduction

The OpenEmbedded/Yocto Project BSP layer for the Radxa machines

Dependencies

The meta-radxa layer depends on:

URI: git://git.yoctoproject.org/poky
branch: zeus

URI: git://git.openembedded.org/meta-openembedded
layers: meta-oe meta-networking meta-python meta-multimedia meta-gnome meta-xfce
branch: zeus

List of Radxa Boards supported

1. RockPi-4A (Tested by Stephen Chan from Radxa Team)
2. RockPi-4B (Tested by Stephen Chan from Radxa Team)
3. RockPi-4C (Tested by Stephen Chan from Radxa Team)
4. RockPi-E
5. RockPi-N10
6. RockPi-PX30
7. RockPi-S

Using the meta-radxa layer

Step 1: Fetching the source

Fetch the source using the commands given below:

~ $ mkdir yocto
~ $ cd yocto
~/yocto $ git clone git://git.yoctoproject.org/poky -b zeus
~/yocto $ cd poky
~/yocto/poky $ git clone git://git.openembedded.org/meta-openembedded.git -b zeus
~/yocto/poky $ git clone https://github.com/nishantpoorswani/meta-radxa.git -b zeus

Step 2: Setting up the Environment

 ~/yocto/poky $ source oe-init-build-env

Step 3: Bblayers.conf Setup

• You can simply copy the bblayers.conf.sample present in meta-radxa/conf folder to the build/conf folder and rename it to bblayers.conf

OR

• Add the layers manually as given below to the bblayers.conf in the build/conf folder

  ${TOPDIR}/../meta \
  ${TOPDIR}/../meta-poky \
  ${TOPDIR}/../meta-yocto-bsp \
  ${TOPDIR}/../meta-openembedded/meta-oe \
  ${TOPDIR}/../meta-openembedded/meta-networking \
  ${TOPDIR}/../meta-openembedded/meta-python \
  ${TOPDIR}/../meta-openembedded/meta-multimedia \ 
  ${TOPDIR}/../meta-openembedded/meta-gnome \
  ${TOPDIR}/../meta-openembedded/meta-xfce \
  ${TOPDIR}/../meta-radxa \

Step 4: Local.conf Setup

• You can simply copy the local.conf.sample present in meta-radxa/conf folder to the build/conf folder and rename it to local.conf and uncomment the machine for which you want to build an image

OR

• Add the following lines in the build/conf/local.conf

MACHINE ?= "xxxx"
DISTRO_FEATURES_append = " pam systemd x11"
VIRTUAL-RUNTIME_init_manager = "systemd"
PACKAGECONFIG_append_pn-systemd = " resolved networkd"
DISTRO_FEATURES_remove = "wayland"

Replace xxxx with the machine you want to build the image for. All supported machines can be found in meta-radxa/conf/machine.

Step 5: Building the Image

• If you wish to build a minimal image use the command given below:

~/yocto/poky/build $ bitbake -k radxa-minimal-image

OR

• If you wish to build a console image use the command given below:

~/yocto/poky/build $ bitbake -k radxa-console-image

OR

• If you wish to build a desktop image use the command given below:

~/yocto/poky/build $ bitbake -k radxa-desktop-image

At the end of a successful build, you should have a gpt.img image in build/tmp/deploy/images/MACHINE/ folder. The gpt.img can be directly flashed on the sd-card

Serial Console

The Serial Console for RockPi-4, RockPi-E and RockPi-N10 is enabled on UART-2. The Serial Console for RockPi-S is enabled on UART-0.

Helpful Links:

• GPIO Pinout for RockPi-4 (https://wiki.radxa.com/Rockpi4/hardware/gpio)
• GPIO Pinout for RockPi-E (https://wiki.radxa.com/RockpiE/hardware/rockpiE#gpio)
• GPIO Pinout for RockPi-N10 (https://wiki.radxa.com/RockpiN10/hardware/rockpiN10#gpio)
• GPIO Pinout for RockPi-S (https://wiki.radxa.com/RockpiS/hardware/gpio)
• RockPi-4 Serial Console Setup (https://wiki.radxa.com/Rockpi4/dev/serial-console)
• RockPi-E Serial Console Setup (https://wiki.radxa.com/RockpiE/dev/serial-console)
• RockPi-N10 Serial Console Setup (https://wiki.radxa.com/RockpiN10/dev/serial-console)
• RockPi-S Serial Console Setup (https://wiki.radxa.com/RockpiS/dev/serial-console)

Login Details

Username: root
Password: rock

Networking

Network Devices available:

• Wifi
• Ethernet
• Bluetooth

Wifi Connectivity

• Using Commandline Based GUI(nmtui) [Available on console and desktop images]

nmtui is a curses based GUI. You can start it by running the following command:

nmtui

• Using Commandline Utility(nmcli) [Available on console and desktop images]

nmcli is a command-line tool for controlling NetworkManager and reporting network status.

List available devices

nmcli dev

Turn on Wifi

nmcli r wifi on

Scanning different devices

nmcli dev wifi

Connect to WiFi Hotspot

nmcli dev wifi connect "SSID" password "PASSWORD"

Note:You need to replace “SSID” and “Password” with your actual WiFi’s SSID and password.

Bluetooth Connectivity

• Bluetooth on RockPi-4B/RockPi-4C

Activating bluetooth:

hciconfig hci0 up

Check Bluetooth device:

 $ hciconfig
 hci0:   Type: Primary  Bus: UART
         BD Address: 43:45:C5:00:1F:AC  ACL MTU: 1021:8  SCO MTU: 64:1
         UP RUNNING 
         RX bytes:876 acl:0 sco:0 events:62 errors:0
         TX bytes:4755 acl:0 sco:0 commands:62 errors:0

• Bluetooth on RockPi-E

Manual setup for bluetooth:

Bluetooth is activated by default on the RockPi-E

Check Bluetooth device:

 $ hciconfig
 hci0:   Type: Primary  Bus: USB
         BD Address: 74:EE:2A:55:23:F7  ACL MTU: 1021:8  SCO MTU: 255:12
         UP RUNNING 
         RX bytes:40357 acl:34 sco:0 events:814 errors:0
         TX bytes:216782 acl:379 sco:0 commands:101 errors:0

• Bluetooth on RockPi-N10

Activating bluetooth:

hciconfig hci0 up

Check Bluetooth device:

 $ hciconfig
 hci0:   Type: Primary  Bus: UART
         BD Address: 22:22:70:B2:10:6F  ACL MTU: 1021:8  SCO MTU: 255:12
         UP RUNNING 
         RX bytes:1399 acl:0 sco:0 events:45 errors:0
         TX bytes:3458 acl:0 sco:0 commands:45 errors:0

• Bluetooth on RockPi-S

Activating bluetooth:

hciconfig hci0 up

Check Bluetooth device:

 $ hciconfig
 hci0:   Type: Primary  Bus: UART
         BD Address: 22:22:70:B2:10:6F  ACL MTU: 1021:8  SCO MTU: 255:12
         UP RUNNING 
         RX bytes:1399 acl:0 sco:0 events:45 errors:0
         TX bytes:3458 acl:0 sco:0 commands:45 errors:0

Release Info

1. RockPi-4

• Kernel version: 4.4.154-109-b04eccb4588e333bdaf3ba7e6e4186d2ebe53770
• U-Boot version: 2017.09-04d66f4b45a47531b5ff6cdbddcdc2cc35fa7aea

2. RockPi-E

• Kernel version: 4.4.194-12-615ae743115011bbe1cd1edc5c9118bf95527f54
• U-Boot version: 2019.10-7b93f1b8bce4106266d4a38dde96fd8080faccea

3. RockPi-N10

• Kernel version: 4.4.167-c36a21e2be755919e8b406069206e67126b7e712
• U-Boot version: 2017.09-7c49a7da79caf2f68bc1074dfa21864d7f23b9e1

4. RockPi-PX30

• Kernel version: 4.4.189-dc47906e88166ae315f0472743de4d80f2bea786
• U-Boot version: 2017.09-cfc37de87bc064b2d6d384566e24c5e4245f113a

5. RockPi-S

• Kernel version: 4.4.143-55-6b7accbc999b6caa8ef603b9d904c99694d0bf41
• U-Boot version: 2017.09-233a23e3ed0b3e5250253ee455c3c5df2080f99c

Change Log

• Added board support for RockPi-N10
• Added board support for RockPi-PX30
• Added board support for RockPi-4A
• Added board support for RockPi-4C
• RockPi-4 Kernel updated to 4.4.154-109-b04eccb4588e333bdaf3ba7e6e4186d2ebe53770
• RockPi-4 U-Boot branch updated from stable-4.4-rockpi4 to rk3399-pie-gms-express-baseline
• RockPi-4 U-Boot updated to 2017.09-04d66f4b45a47531b5ff6cdbddcdc2cc35fa7aea
• RockPi-4 boards support SPI + NVME booting
• RockPi-4b dtb changed from rockpi-4b-linux.dtb to rk3399-rock-pi-4b.dtb
• RockPi-S Kernel updated to 4.4.143-55-6b7accbc999b6caa8ef603b9d904c99694d0bf41
• RockPi-S U-Boot updated to 2017.09-c93a0fc70993c12e605b1312577252ca9cdec6c8
• RockPi-S and RockPi-E gpt images have now been updated to use the 2 partition instead of the tradition 5 partition
• Use ttySx as debuger console instead of ttyFIQ0 for RockPi-S and RockPi-E
• Major Reorganization in U-Boot recipes. New structure will make it easier for adding new boards
• Added recipe for making desktop images
• Added recipe for setting up BT firmware and driver at boot for Rockpi-4, RockPi-E, RockPi-N10 and RockPi-S
• Added recipe for kernel-headers, file-system resize at boot, mraa and create-ap

Contributing

Please use github for pull requests: https://github.com/nishantpoorswani/meta-radxa/pulls

Reporting bugs

The github issue tracker (https://github.com/nishantpoorswani/meta-radxa/issues) is being used to keep track of bugs.

Maintainers

• Nishant Poorswani nishantpoorswani@gmail.com