Skip to content

Commit

Permalink
[Core] PMW33XX drivers overhaul (qmk#17613)
Browse files Browse the repository at this point in the history 
* PMW33XX drivers overhaul

This combines the PMW3389 and PM3360 drivers as they only differ in the
firmware blobs and CPI get and set functions. The following changes have
been made:

* PMW3389 now gets the same multi-sensor feature that is already available on the
  PMW3360.

* Introduced a shared pmw33xx_report_t struct is now directly readable via SPI
  transactions instead of individual byte-sized reads, saving multiple
  copies and bitshift operations.

* pmw33(89/60)_get_report functions had unreachable branches in their motion
  detection logic these have been simplied as much as possible.

* The fast firmware upload option has been removed as this becomes obsolete by
  the newly introduced polled waiting functions for ChibiOS polled waiting

* PMW33(60/89)_SPI_LSBFIRST and PMW33(60/89)_SPI_MODE config options
  have been removed as they don't need to be configurable.

* All PMW3389 and PMW3360 defines have been unified to a PMW33XX prefix
  to reduce code duplication and make the defines interchangeable

* Adjust keyboards to PMW33XX naming scheme
  • Loading branch information
@KarlK90 @nolanseaton
KarlK90 authored and nolanseaton committed Jan 23, 2023
1 parent e376e01 commit 23a9b83
Show file tree
Hide file tree
Showing 26 changed files with 1,168 additions and 1,445 deletions.
6 changes: 2 additions & 4 deletions builddefs/common_features.mk
View file
Original file line number Diff line number Diff line change
Expand Up @@ -161,11 +161,9 @@ ifeq ($(strip $(POINTING_DEVICE_ENABLE)), yes)
else ifeq ($(strip $(POINTING_DEVICE_DRIVER)), pimoroni_trackball)
OPT_DEFS += -DSTM32_SPI -DHAL_USE_I2C=TRUE
QUANTUM_LIB_SRC += i2c_master.c
else ifeq ($(strip $(POINTING_DEVICE_DRIVER)), pmw3360)
OPT_DEFS += -DSTM32_SPI -DHAL_USE_SPI=TRUE
QUANTUM_LIB_SRC += spi_master.c
else ifeq ($(strip $(POINTING_DEVICE_DRIVER)), pmw3389)
else ifneq ($(filter $(strip $(POINTING_DEVICE_DRIVER)),pmw3360 pmw3389),)
OPT_DEFS += -DSTM32_SPI -DHAL_USE_SPI=TRUE
SRC += drivers/sensors/pmw33xx_common.c
QUANTUM_LIB_SRC += spi_master.c
endif
endif
Expand Down
81 changes: 32 additions & 49 deletions docs/feature_pointing_device.md
View file
Original file line number Diff line number Diff line change
Expand Up @@ -154,85 +154,68 @@ The Pimoroni Trackball module is a I2C based breakout board with an RGB enable t
|`PIMORONI_TRACKBALL_DEBOUNCE_CYCLES` | (Optional) The number of scan cycles used for debouncing on the ball press. | `20` |
|`PIMORONI_TRACKBALL_ERROR_COUNT` | (Optional) Specifies the number of read/write errors until the sensor is disabled. | `10` |

### PMW 3360 Sensor
### PMW 3360 and PMW 3389 Sensor

This drivers supports multiple sensors _per_ controller, so 2 can be attached at the same side for split keyboards (or unsplit keyboards).
To use the PMW 3360 sensor, add this to your `rules.mk`
This drivers supports both the PMW 3360 and PMW 3389 sensor as well as multiple sensors of the same type _per_ controller, so 2 can be attached at the same side for split keyboards (or unsplit keyboards).

To use the **PMW 3360** sensor, add this to your `rules.mk`

```make
POINTING_DEVICE_DRIVER = pmw3360
```

The PMW 3360 is an SPI driven optical sensor, that uses a built in IR LED for surface tracking.
The CPI range is 100-12000, in increments of 100. Defaults to 1600 CPI.

| Setting | Description | Default |
|-----------------------------|--------------------------------------------------------------------------------------------|---------------|
|`PMW3360_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | _not defined_ |
|`PMW3360_CS_PINS` | (Alternative) Sets the Cable Select pins connected to multiple sensors. | _not defined_ |
|`PMW3360_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `2000000` |
|`PMW3360_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false` |
|`PMW3360_SPI_MODE` | (Optional) Sets the SPI Mode for the sensor. | `3` |
|`PMW3360_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ |
|`PMW3360_LIFTOFF_DISTANCE` | (Optional) Sets the lift off distance at run time | `0x02` |
|`ROTATIONAL_TRANSFORM_ANGLE` | (Optional) Allows for the sensor data to be rotated +/- 127 degrees directly in the sensor.| `0` |
|`PMW3360_FIRMWARE_UPLOAD_FAST` | (Optional) Skips the 15us wait between firmware blocks. | _not defined_ |
To use the **PMW 3389** sensor, add this to your `rules.mk`

The CPI range is 100-12000, in increments of 100. Defaults to 1600 CPI.
```make
POINTING_DEVICE_DRIVER = pmw3389
```

To use multiple sensors, instead of setting `PMW3360_CS_PIN` you need to set `PMW3360_CS_PINS` and also handle and merge the read from this sensor in user code.
The CPI range is 50-16000, in increments of 50. Defaults to 2000 CPI.

Both PMW 3360 and PMW 3389 are SPI driven optical sensors, that use a built in IR LED for surface tracking.

| Setting | Description | Default |
| ---------------------------- | ------------------------------------------------------------------------------------------- | ------------- |
| `PMW33XX_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | _not defined_ |
| `PMW33XX_CS_PINS` | (Alternative) Sets the Cable Select pins connected to multiple sensors. | _not defined_ |
| `PMW33XX_CPI` | (Optional) Sets counts per inch sensitivity of the sensor. | _varies_ |
| `PMW33XX_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `2000000` |
| `PMW33XX_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ |
| `PMW33XX_LIFTOFF_DISTANCE` | (Optional) Sets the lift off distance at run time | `0x02` |
| `ROTATIONAL_TRANSFORM_ANGLE` | (Optional) Allows for the sensor data to be rotated +/- 127 degrees directly in the sensor. | `0` |

To use multiple sensors, instead of setting `PMW33XX_CS_PIN` you need to set `PMW33XX_CS_PINS` and also handle and merge the read from this sensor in user code.
Note that different (per sensor) values of CPI, speed liftoff, rotational angle or flipping of X/Y is not currently supported.

```c
// in config.h:
#define PMW3360_CS_PINS { B5, B6 }

#define PMW33XX_CS_PINS { B5, B6 }
// in keyboard.c:
#ifdef POINTING_DEVICE_ENABLE
void pointing_device_init_kb(void) {
pmw3360_init(1); // index 1 is the second device.
pointing_device_set_cpi(800); // applies to both sensors
pmw33xx_init(1); // index 1 is the second device.
pmw33xx_set_cpi(0, 800); // applies to first sensor
pmw33xx_set_cpi(1, 800); // applies to second sensor
pointing_device_init_user();
}

// Contains report from sensor #0 already, need to merge in from sensor #1
report_mouse_t pointing_device_task_kb(report_mouse_t mouse_report) {
report_pmw3360_t data = pmw3360_read_burst(1);
if (data.isOnSurface && data.isMotion) {
pmw33xx_report_t report = pmw33xx_read_burst(1);
if (!report.motion.b.is_lifted && report.motion.b.is_motion) {
// From quantum/pointing_device_drivers.c
#define constrain_hid(amt) ((amt) < -127 ? -127 : ((amt) > 127 ? 127 : (amt)))
mouse_report.x = constrain_hid(mouse_report.x + data.dx);
mouse_report.y = constrain_hid(mouse_report.y + data.dy);
mouse_report.x = constrain_hid(mouse_report.x + report.delta_x);
mouse_report.y = constrain_hid(mouse_report.y + report.delta_y);
}
return pointing_device_task_user(mouse_report);
}
#endif

```

### PMW 3389 Sensor

To use the PMW 3389 sensor, add this to your `rules.mk`

```make
POINTING_DEVICE_DRIVER = pmw3389
```

The PMW 3389 is an SPI driven optical sensor, that uses a built in IR LED for surface tracking.

| Setting | Description | Default |
|---------------------------------|--------------------------------------------------------------------------------------------|---------------|
|`PMW3389_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | _not defined_ |
|`PMW3389_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `2000000` |
|`PMW3389_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false` |
|`PMW3389_SPI_MODE` | (Optional) Sets the SPI Mode for the sensor. | `3` |
|`PMW3389_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ |
|`PMW3389_LIFTOFF_DISTANCE` | (Optional) Sets the lift off distance at run time | `0x02` |
|`ROTATIONAL_TRANSFORM_ANGLE` | (Optional) Allows for the sensor data to be rotated +/- 30 degrees directly in the sensor. | `0` |
|`PMW3389_FIRMWARE_UPLOAD_FAST` | (Optional) Skips the 15us wait between firmware blocks. | _not defined_ |

The CPI range is 50-16000, in increments of 50. Defaults to 2000 CPI.


### Custom Driver

If you have a sensor type that isn't supported above, a custom option is available by adding the following to your `rules.mk`
Expand Down
Loading

0 comments on commit 23a9b83

Please sign in to comment.