Stable Diffusion WebUI Forge is a platform on top of Stable Diffusion WebUI (based on Gradio) to make development easier, optimize resource management, and speed up inference.
The name "Forge" is inspired from "Minecraft Forge". This project is aimed at becoming SD WebUI's Forge.
Compared to original WebUI (for SDXL inference at 1024px), you can expect the below speed-ups:
-
If you use common GPU like 8GB vram, you can expect to get about 30~45% speed up in inference speed (it/s), the GPU memory peak (in task manager) will drop about 700MB to 1.3GB, the maximum diffusion resolution (that will not OOM) will increase about 2x to 3x, and the maximum diffusion batch size (that will not OOM) will increase about 4x to 6x.
-
If you use less powerful GPU like 6GB vram, you can expect to get about 60~75% speed up in inference speed (it/s), the GPU memory peak (in task manager) will drop about 800MB to 1.5GB, the maximum diffusion resolution (that will not OOM) will increase about 3x, and the maximum diffusion batch size (that will not OOM) will increase about 4x.
-
If you use powerful GPU like 4090 with 24GB vram, you can expect to get about 3~6% speed up in inference speed (it/s), the GPU memory peak (in task manager) will drop about 1GB to 1.4GB, the maximum diffusion resolution (that will not OOM) will increase about 1.6x, and the maximum diffusion batch size (that will not OOM) will increase about 2x.
-
If you use ControlNet for SDXL, the maximum ControlNet count (that will not OOM) will increase about 2x, the speed with SDXL+ControlNet will speed up about 30~45%.
Another very important change that Forge brings is Unet Patcher. Using Unet Patcher, methods like Self-Attention Guidance, Kohya High Res Fix, FreeU, StyleAlign, Hypertile can all be implemented in about 100 lines of codes.
Thanks to Unet Patcher, many new things are possible now and supported in Forge, including SVD, Z123, masked Ip-adapter, masked controlnet, photomaker, etc.
No need to monkeypatch UNet and conflict other extensions anymore!
Forge also adds a few samplers, including but not limited to DDPM, DDPM Karras, DPM++ 2M Turbo, DPM++ 2M SDE Turbo, LCM Karras, Euler A Turbo, etc. (LCM is already in original webui since 1.7.0).
Finally, Forge promise that we will only do our jobs. Forge will never add unnecessary opinioned changes to the user interface. You are still using 100% Automatic1111 WebUI.
If you are proficient in Git and you want to install Forge as another branch of SD-WebUI, please see here. In this way, you can reuse all SD checkpoints and all extensions you installed previously in your OG SD-WebUI, but you should know what you are doing.
If you know what you are doing, you can install Forge using same method as SD-WebUI. (Install Git, Python, Git Clone the forge repo https://github.com/lllyasviel/stable-diffusion-webui-forge.git and then run webui-user.bat).
Or you can just use this one-click installation package (with git and python included).
>>> Click Here to Download One-Click Package<<<
After you download, you uncompress, use update.bat to update, and use run.bat to run.
Note that running update.bat is important, otherwise you may be using a previous version with potential bugs unfixed.
I tested with several devices, and this is a typical result from 8GB VRAM (3070ti laptop) with SDXL.
This is original WebUI:
(average about 7.4GB/8GB, peak at about 7.9GB/8GB)
This is WebUI Forge:
(average and peak are all 6.3GB/8GB)
You can see that Forge does not change WebUI results. Installing Forge is not a seed breaking change.
Forge can perfectly keep WebUI unchanged even for most complicated prompts like fantasy landscape with a [mountain:lake:0.25] and [an oak:a christmas tree:0.75][ in foreground::0.6][ in background:0.25] [shoddy:masterful:0.5].
All your previous works still work in Forge!
Forge backend removes all WebUI's codes related to resource management and reworked everything. All previous CMD flags like medvram, lowvram, medvram-sdxl, precision full, no half, no half vae, attention_xxx, upcast unet, ... are all REMOVED. Adding these flags will not cause error but they will not do anything now. We highly encourage Forge users to remove all cmd flags and let Forge to decide how to load models.
Without any cmd flag, Forge can run SDXL with 4GB vram and SD1.5 with 2GB vram.
Some flags that you may still pay attention to:
-
--always-offload-from-vram(This flag will make things slower but less risky). This option will let Forge always unload models from VRAM. This can be useful if you use multiple software together and want Forge to use less VRAM and give some VRAM to other software, or when you are using some old extensions that will compete vram with Forge, or (very rarely) when you get OOM. -
--cuda-malloc(This flag will make things faster but more risky). This will ask pytorch to use cudaMallocAsync for tensor malloc. On some profilers I can observe performance gain at millisecond level, but the real speed up on most my devices are often unnoticed (about or less than 0.1 second per image). This cannot be set as default because many users reported issues that the async malloc will crash the program. Users need to enable this cmd flag at their own risk. -
--cuda-stream(This flag will make things faster but more risky). This will use pytorch CUDA streams (a special type of thread on GPU) to move models and compute tensors simultaneously. This can almost eliminate all model moving time, and speed up SDXL on 30XX/40XX devices with small VRAM (eg, RTX 4050 6GB, RTX 3060 Laptop 6GB, etc) by about 15% to 25%. However, this unfortunately cannot be set as default because I observe higher possibility of pure black images (Nan outputs) on 2060, and higher chance of OOM on 1080 and 2060. When the resolution is large, there is a chance that the computation time of one single attention layer is longer than the time for moving entire model to GPU. When that happens, the next attention layer will OOM since the GPU is filled with the entire model, and no remaining space is available for computing another attention layer. Most overhead detecting methods are not robust enough to be reliable on old devices (in my tests). Users need to enable this cmd flag at their own risk. -
--pin-shared-memory(This flag will make things faster but more risky). Effective only when used together with--cuda-stream. This will offload modules to Shared GPU Memory instead of system RAM when offloading models. On some 30XX/40XX devices with small VRAM (eg, RTX 4050 6GB, RTX 3060 Laptop 6GB, etc), I can observe significant (at least 20%) speed-up for SDXL. However, this unfortunately cannot be set as default because the OOM of Shared GPU Memory is a much more severe problem than common GPU memory OOM. Pytorch does not provide any robust method to unload or detect Shared GPU Memory. Once the Shared GPU Memory OOM, the entire program will crash (observed with SDXL on GTX 1060/1050/1066), and there is no dynamic method to prevent or recover from the crash. Users need to enable this cmd flag at their own risk.
If you really want to play with cmd flags, you can additionally control the GPU with:
(extreme VRAM cases)
--always-gpu
--always-cpu
(rare attention cases)
--attention-split
--attention-quad
--attention-pytorch
--disable-xformers
--disable-attention-upcast
(float point type)
--all-in-fp32
--all-in-fp16
--unet-in-bf16
--unet-in-fp16
--unet-in-fp8-e4m3fn
--unet-in-fp8-e5m2
--vae-in-fp16
--vae-in-fp32
--vae-in-bf16
--clip-in-fp8-e4m3fn
--clip-in-fp8-e5m2
--clip-in-fp16
--clip-in-fp32
(rare platforms)
--directml
--disable-ipex-hijack
--pytorch-deterministic
Again, Forge do not recommend users to use any cmd flags unless you are very sure that you really need these.
Note that Forge does not use any other software as backend. The full name of the backend is Stable Diffusion WebUI with Forge backend, or for simplicity, the Forge backend. The API and python symbols are made similar to previous software only for reducing the learning cost of developers.
Now developing an extension is super simple. We finally have a patchable UNet.
Below is using one single file with 80 lines of codes to support FreeU:
extensions-builtin/sd_forge_freeu/scripts/forge_freeu.py
import torch
import gradio as gr
from modules import scripts
def Fourier_filter(x, threshold, scale):
x_freq = torch.fft.fftn(x.float(), dim=(-2, -1))
x_freq = torch.fft.fftshift(x_freq, dim=(-2, -1))
B, C, H, W = x_freq.shape
mask = torch.ones((B, C, H, W), device=x.device)
crow, ccol = H // 2, W //2
mask[..., crow - threshold:crow + threshold, ccol - threshold:ccol + threshold] = scale
x_freq = x_freq * mask
x_freq = torch.fft.ifftshift(x_freq, dim=(-2, -1))
x_filtered = torch.fft.ifftn(x_freq, dim=(-2, -1)).real
return x_filtered.to(x.dtype)
def set_freeu_v2_patch(model, b1, b2, s1, s2):
model_channels = model.model.model_config.unet_config["model_channels"]
scale_dict = {model_channels * 4: (b1, s1), model_channels * 2: (b2, s2)}
def output_block_patch(h, hsp, *args, **kwargs):
scale = scale_dict.get(h.shape[1], None)
if scale is not None:
hidden_mean = h.mean(1).unsqueeze(1)
B = hidden_mean.shape[0]
hidden_max, _ = torch.max(hidden_mean.view(B, -1), dim=-1, keepdim=True)
hidden_min, _ = torch.min(hidden_mean.view(B, -1), dim=-1, keepdim=True)
hidden_mean = (hidden_mean - hidden_min.unsqueeze(2).unsqueeze(3)) / \
(hidden_max - hidden_min).unsqueeze(2).unsqueeze(3)
h[:, :h.shape[1] // 2] = h[:, :h.shape[1] // 2] * ((scale[0] - 1) * hidden_mean + 1)
hsp = Fourier_filter(hsp, threshold=1, scale=scale[1])
return h, hsp
m = model.clone()
m.set_model_output_block_patch(output_block_patch)
return m
class FreeUForForge(scripts.Script):
def title(self):
return "FreeU Integrated"
def show(self, is_img2img):
# make this extension visible in both txt2img and img2img tab.
return scripts.AlwaysVisible
def ui(self, *args, **kwargs):
with gr.Accordion(open=False, label=self.title()):
freeu_enabled = gr.Checkbox(label='Enabled', value=False)
freeu_b1 = gr.Slider(label='B1', minimum=0, maximum=2, step=0.01, value=1.01)
freeu_b2 = gr.Slider(label='B2', minimum=0, maximum=2, step=0.01, value=1.02)
freeu_s1 = gr.Slider(label='S1', minimum=0, maximum=4, step=0.01, value=0.99)
freeu_s2 = gr.Slider(label='S2', minimum=0, maximum=4, step=0.01, value=0.95)
return freeu_enabled, freeu_b1, freeu_b2, freeu_s1, freeu_s2
def process_before_every_sampling(self, p, *script_args, **kwargs):
# This will be called before every sampling.
# If you use highres fix, this will be called twice.
freeu_enabled, freeu_b1, freeu_b2, freeu_s1, freeu_s2 = script_args
if not freeu_enabled:
return
unet = p.sd_model.forge_objects.unet
unet = set_freeu_v2_patch(unet, freeu_b1, freeu_b2, freeu_s1, freeu_s2)
p.sd_model.forge_objects.unet = unet
# Below codes will add some logs to the texts below the image outputs on UI.
# The extra_generation_params does not influence results.
p.extra_generation_params.update(dict(
freeu_enabled=freeu_enabled,
freeu_b1=freeu_b1,
freeu_b2=freeu_b2,
freeu_s1=freeu_s1,
freeu_s2=freeu_s2,
))
returnIt looks like this:
Similar components like HyperTile, KohyaHighResFix, SAG, can all be implemented within 100 lines of codes (see also the codes).
ControlNets can finally be called by different extensions.
Implementing Stable Video Diffusion and Zero123 are also super simple now (see also the codes).
Stable Video Diffusion:
extensions-builtin/sd_forge_svd/scripts/forge_svd.py
import torch
import gradio as gr
import os
import pathlib
from modules import script_callbacks
from modules.paths import models_path
from modules.ui_common import ToolButton, refresh_symbol
from modules import shared
from modules_forge.forge_util import numpy_to_pytorch, pytorch_to_numpy
from ldm_patched.modules.sd import load_checkpoint_guess_config
from ldm_patched.contrib.external_video_model import VideoLinearCFGGuidance, SVD_img2vid_Conditioning
from ldm_patched.contrib.external import KSampler, VAEDecode
opVideoLinearCFGGuidance = VideoLinearCFGGuidance()
opSVD_img2vid_Conditioning = SVD_img2vid_Conditioning()
opKSampler = KSampler()
opVAEDecode = VAEDecode()
svd_root = os.path.join(models_path, 'svd')
os.makedirs(svd_root, exist_ok=True)
svd_filenames = []
def update_svd_filenames():
global svd_filenames
svd_filenames = [
pathlib.Path(x).name for x in
shared.walk_files(svd_root, allowed_extensions=[".pt", ".ckpt", ".safetensors"])
]
return svd_filenames
@torch.inference_mode()
@torch.no_grad()
def predict(filename, width, height, video_frames, motion_bucket_id, fps, augmentation_level,
sampling_seed, sampling_steps, sampling_cfg, sampling_sampler_name, sampling_scheduler,
sampling_denoise, guidance_min_cfg, input_image):
filename = os.path.join(svd_root, filename)
model_raw, _, vae, clip_vision = \
load_checkpoint_guess_config(filename, output_vae=True, output_clip=False, output_clipvision=True)
model = opVideoLinearCFGGuidance.patch(model_raw, guidance_min_cfg)[0]
init_image = numpy_to_pytorch(input_image)
positive, negative, latent_image = opSVD_img2vid_Conditioning.encode(
clip_vision, init_image, vae, width, height, video_frames, motion_bucket_id, fps, augmentation_level)
output_latent = opKSampler.sample(model, sampling_seed, sampling_steps, sampling_cfg,
sampling_sampler_name, sampling_scheduler, positive,
negative, latent_image, sampling_denoise)[0]
output_pixels = opVAEDecode.decode(vae, output_latent)[0]
outputs = pytorch_to_numpy(output_pixels)
return outputs
def on_ui_tabs():
with gr.Blocks() as svd_block:
with gr.Row():
with gr.Column():
input_image = gr.Image(label='Input Image', source='upload', type='numpy', height=400)
with gr.Row():
filename = gr.Dropdown(label="SVD Checkpoint Filename",
choices=svd_filenames,
value=svd_filenames[0] if len(svd_filenames) > 0 else None)
refresh_button = ToolButton(value=refresh_symbol, tooltip="Refresh")
refresh_button.click(
fn=lambda: gr.update(choices=update_svd_filenames),
inputs=[], outputs=filename)
width = gr.Slider(label='Width', minimum=16, maximum=8192, step=8, value=1024)
height = gr.Slider(label='Height', minimum=16, maximum=8192, step=8, value=576)
video_frames = gr.Slider(label='Video Frames', minimum=1, maximum=4096, step=1, value=14)
motion_bucket_id = gr.Slider(label='Motion Bucket Id', minimum=1, maximum=1023, step=1, value=127)
fps = gr.Slider(label='Fps', minimum=1, maximum=1024, step=1, value=6)
augmentation_level = gr.Slider(label='Augmentation Level', minimum=0.0, maximum=10.0, step=0.01,
value=0.0)
sampling_steps = gr.Slider(label='Sampling Steps', minimum=1, maximum=200, step=1, value=20)
sampling_cfg = gr.Slider(label='CFG Scale', minimum=0.0, maximum=50.0, step=0.1, value=2.5)
sampling_denoise = gr.Slider(label='Sampling Denoise', minimum=0.0, maximum=1.0, step=0.01, value=1.0)
guidance_min_cfg = gr.Slider(label='Guidance Min Cfg', minimum=0.0, maximum=100.0, step=0.5, value=1.0)
sampling_sampler_name = gr.Radio(label='Sampler Name',
choices=['euler', 'euler_ancestral', 'heun', 'heunpp2', 'dpm_2',
'dpm_2_ancestral', 'lms', 'dpm_fast', 'dpm_adaptive',
'dpmpp_2s_ancestral', 'dpmpp_sde', 'dpmpp_sde_gpu',
'dpmpp_2m', 'dpmpp_2m_sde', 'dpmpp_2m_sde_gpu',
'dpmpp_3m_sde', 'dpmpp_3m_sde_gpu', 'ddpm', 'lcm', 'ddim',
'uni_pc', 'uni_pc_bh2'], value='euler')
sampling_scheduler = gr.Radio(label='Scheduler',
choices=['normal', 'karras', 'exponential', 'sgm_uniform', 'simple',
'ddim_uniform'], value='karras')
sampling_seed = gr.Number(label='Seed', value=12345, precision=0)
generate_button = gr.Button(value="Generate")
ctrls = [filename, width, height, video_frames, motion_bucket_id, fps, augmentation_level,
sampling_seed, sampling_steps, sampling_cfg, sampling_sampler_name, sampling_scheduler,
sampling_denoise, guidance_min_cfg, input_image]
with gr.Column():
output_gallery = gr.Gallery(label='Gallery', show_label=False, object_fit='contain',
visible=True, height=1024, columns=4)
generate_button.click(predict, inputs=ctrls, outputs=[output_gallery])
return [(svd_block, "SVD", "svd")]
update_svd_filenames()
script_callbacks.on_ui_tabs(on_ui_tabs)Note that although the above codes look like independent codes, they actually will automatically offload/unload any other models. For example, below is me opening webui, load SDXL, generated an image, then go to SVD, then generated image frames. You can see that the GPU memory is perfectly managed and the SDXL is moved to RAM then SVD is moved to GPU.
Note that this management is fully automatic. This makes writing extensions super simple.
Similarly, Zero123:
Below is a simple extension to have a completely independent pass of ControlNet that never conflicts any other extensions:
extensions-builtin/sd_forge_controlnet_example/scripts/sd_forge_controlnet_example.py
Note that this extension is hidden because it is only for developers. To see it in UI, use --show-controlnet-example.
The memory optimization in this example is fully automatic. You do not need to care about memory and inference speed, but you may want to cache objects if you wish.
# Use --show-controlnet-example to see this extension.
import cv2
import gradio as gr
import torch
from modules import scripts
from modules.shared_cmd_options import cmd_opts
from modules_forge.shared import supported_preprocessors
from modules.modelloader import load_file_from_url
from ldm_patched.modules.controlnet import load_controlnet
from modules_forge.controlnet import apply_controlnet_advanced
from modules_forge.forge_util import numpy_to_pytorch
from modules_forge.shared import controlnet_dir
class ControlNetExampleForge(scripts.Script):
model = None
def title(self):
return "ControlNet Example for Developers"
def show(self, is_img2img):
# make this extension visible in both txt2img and img2img tab.
return scripts.AlwaysVisible
def ui(self, *args, **kwargs):
with gr.Accordion(open=False, label=self.title()):
gr.HTML('This is an example controlnet extension for developers.')
gr.HTML('You see this extension because you used --show-controlnet-example')
input_image = gr.Image(source='upload', type='numpy')
funny_slider = gr.Slider(label='This slider does nothing. It just shows you how to transfer parameters.',
minimum=0.0, maximum=1.0, value=0.5)
return input_image, funny_slider
def process(self, p, *script_args, **kwargs):
input_image, funny_slider = script_args
# This slider does nothing. It just shows you how to transfer parameters.
del funny_slider
if input_image is None:
return
# controlnet_canny_path = load_file_from_url(
# url='https://huggingface.co/lllyasviel/sd_control_collection/resolve/main/sai_xl_canny_256lora.safetensors',
# model_dir=model_dir,
# file_name='sai_xl_canny_256lora.safetensors'
# )
controlnet_canny_path = load_file_from_url(
url='https://huggingface.co/lllyasviel/fav_models/resolve/main/fav/control_v11p_sd15_canny_fp16.safetensors',
model_dir=controlnet_dir,
file_name='control_v11p_sd15_canny_fp16.safetensors'
)
print('The model [control_v11p_sd15_canny_fp16.safetensors] download finished.')
self.model = load_controlnet(controlnet_canny_path)
print('Controlnet loaded.')
return
def process_before_every_sampling(self, p, *script_args, **kwargs):
# This will be called before every sampling.
# If you use highres fix, this will be called twice.
input_image, funny_slider = script_args
if input_image is None or self.model is None:
return
B, C, H, W = kwargs['noise'].shape # latent_shape
height = H * 8
width = W * 8
batch_size = p.batch_size
preprocessor = supported_preprocessors['canny']
# detect control at certain resolution
control_image = preprocessor(
input_image, resolution=512, slider_1=100, slider_2=200, slider_3=None)
# here we just use nearest neighbour to align input shape.
# You may want crop and resize, or crop and fill, or others.
control_image = cv2.resize(
control_image, (width, height), interpolation=cv2.INTER_NEAREST)
# Output preprocessor result. Now called every sampling. Cache in your own way.
p.extra_result_images.append(control_image)
print('Preprocessor Canny finished.')
control_image_bchw = numpy_to_pytorch(control_image).movedim(-1, 1)
unet = p.sd_model.forge_objects.unet
# Unet has input, middle, output blocks, and we can give different weights
# to each layers in all blocks.
# Below is an example for stronger control in middle block.
# This is helpful for some high-res fix passes. (p.is_hr_pass)
positive_advanced_weighting = {
'input': [0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1, 1.2],
'middle': [1.0],
'output': [0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1, 1.2]
}
negative_advanced_weighting = {
'input': [0.15, 0.25, 0.35, 0.45, 0.55, 0.65, 0.75, 0.85, 0.95, 1.05, 1.15, 1.25],
'middle': [1.05],
'output': [0.15, 0.25, 0.35, 0.45, 0.55, 0.65, 0.75, 0.85, 0.95, 1.05, 1.15, 1.25]
}
# The advanced_frame_weighting is a weight applied to each image in a batch.
# The length of this list must be same with batch size
# For example, if batch size is 5, the below list is [0.2, 0.4, 0.6, 0.8, 1.0]
# If you view the 5 images as 5 frames in a video, this will lead to
# progressively stronger control over time.
advanced_frame_weighting = [float(i + 1) / float(batch_size) for i in range(batch_size)]
# The advanced_sigma_weighting allows you to dynamically compute control
# weights given diffusion timestep (sigma).
# For example below code can softly make beginning steps stronger than ending steps.
sigma_max = unet.model.model_sampling.sigma_max
sigma_min = unet.model.model_sampling.sigma_min
advanced_sigma_weighting = lambda s: (s - sigma_min) / (sigma_max - sigma_min)
# You can even input a tensor to mask all control injections
# The mask will be automatically resized during inference in UNet.
# The size should be B 1 H W and the H and W are not important
# because they will be resized automatically
advanced_mask_weighting = torch.ones(size=(1, 1, 512, 512))
# But in this simple example we do not use them
positive_advanced_weighting = None
negative_advanced_weighting = None
advanced_frame_weighting = None
advanced_sigma_weighting = None
advanced_mask_weighting = None
unet = apply_controlnet_advanced(unet=unet, controlnet=self.model, image_bchw=control_image_bchw,
strength=0.6, start_percent=0.0, end_percent=0.8,
positive_advanced_weighting=positive_advanced_weighting,
negative_advanced_weighting=negative_advanced_weighting,
advanced_frame_weighting=advanced_frame_weighting,
advanced_sigma_weighting=advanced_sigma_weighting,
advanced_mask_weighting=advanced_mask_weighting)
p.sd_model.forge_objects.unet = unet
# Below codes will add some logs to the texts below the image outputs on UI.
# The extra_generation_params does not influence results.
p.extra_generation_params.update(dict(
controlnet_info='You should see these texts below output images!',
))
return
# Use --show-controlnet-example to see this extension.
if not cmd_opts.show_controlnet_example:
del ControlNetExampleForge
Below is the full codes to add a normalbae preprocessor with perfect memory managements.
You can use arbitrary independent extensions to add a preprocessor.
Your preprocessor will be read by all other extensions using modules_forge.shared.preprocessors
Below codes are in extensions-builtin\forge_preprocessor_normalbae\scripts\preprocessor_normalbae.py
from modules_forge.supported_preprocessor import Preprocessor, PreprocessorParameter
from modules_forge.shared import preprocessor_dir, add_supported_preprocessor
from modules_forge.forge_util import resize_image_with_pad
from modules.modelloader import load_file_from_url
import types
import torch
import numpy as np
from einops import rearrange
from annotator.normalbae.models.NNET import NNET
from annotator.normalbae import load_checkpoint
from torchvision import transforms
class PreprocessorNormalBae(Preprocessor):
def __init__(self):
super().__init__()
self.name = 'normalbae'
self.tags = ['NormalMap']
self.model_filename_filters = ['normal']
self.slider_resolution = PreprocessorParameter(
label='Resolution', minimum=128, maximum=2048, value=512, step=8, visible=True)
self.slider_1 = PreprocessorParameter(visible=False)
self.slider_2 = PreprocessorParameter(visible=False)
self.slider_3 = PreprocessorParameter(visible=False)
self.show_control_mode = True
self.do_not_need_model = False
self.sorting_priority = 100 # higher goes to top in the list
def load_model(self):
if self.model_patcher is not None:
return
model_path = load_file_from_url(
"https://huggingface.co/lllyasviel/Annotators/resolve/main/scannet.pt",
model_dir=preprocessor_dir)
args = types.SimpleNamespace()
args.mode = 'client'
args.architecture = 'BN'
args.pretrained = 'scannet'
args.sampling_ratio = 0.4
args.importance_ratio = 0.7
model = NNET(args)
model = load_checkpoint(model_path, model)
self.norm = transforms.Normalize(mean=[0.485, 0.456, 0.406], std=[0.229, 0.224, 0.225])
self.model_patcher = self.setup_model_patcher(model)
def __call__(self, input_image, resolution, slider_1=None, slider_2=None, slider_3=None, **kwargs):
input_image, remove_pad = resize_image_with_pad(input_image, resolution)
self.load_model()
self.move_all_model_patchers_to_gpu()
assert input_image.ndim == 3
image_normal = input_image
with torch.no_grad():
image_normal = self.send_tensor_to_model_device(torch.from_numpy(image_normal))
image_normal = image_normal / 255.0
image_normal = rearrange(image_normal, 'h w c -> 1 c h w')
image_normal = self.norm(image_normal)
normal = self.model_patcher.model(image_normal)
normal = normal[0][-1][:, :3]
normal = ((normal + 1) * 0.5).clip(0, 1)
normal = rearrange(normal[0], 'c h w -> h w c').cpu().numpy()
normal_image = (normal * 255.0).clip(0, 255).astype(np.uint8)
return remove_pad(normal_image)
add_supported_preprocessor(PreprocessorNormalBae())Thanks to Unet Patcher, many new things are possible now and supported in Forge, including SVD, Z123, masked Ip-adapter, masked controlnet, photomaker, etc.
Masked Ip-Adapter
Masked ControlNet
PhotoMaker
(Note that photomaker is a special control that need you to add the trigger word "photomaker". Your prompt should be like "a photo of photomaker")
Marigold Depth
DDPM
DDPM Karras
DPM++ 2M Turbo
DPM++ 2M SDE Turbo
LCM Karras
Euler A Turbo
ControlNet and TiledVAE are integrated, and you should uninstall these two extensions:
sd-webui-controlnet
multidiffusion-upscaler-for-automatic1111
Note that AnimateDiff is under construction by continue-revolution at sd-webui-animatediff forge/master branch and sd-forge-animatediff (they are in sync). (continue-revolution original words: prompt travel, inf t2v, controlnet v2v have been proven to work well; motion lora, i2i batch still under construction and may be finished in a week")
Other extensions should work without problems, like:
canvas-zoom
translations/localizations
Dynamic Prompts
Adetailer
Ultimate SD Upscale
Reactor
However, if newer extensions use Forge, their codes can be much shorter.
Usually if an old extension rework using Forge's unet patcher, 80% codes can be removed, especially when they need to call controlnet.
Forge uses a bot to get commits and codes from https://github.com/AUTOMATIC1111/stable-diffusion-webui/tree/dev every afternoon (if merge is automatically successful by a git bot, or by my compiler, or by my ChatGPT bot) or mid-night (if my compiler and my ChatGPT bot both failed to merge and I review it manually).
All PRs that can be implemented in https://github.com/AUTOMATIC1111/stable-diffusion-webui/tree/dev should submit PRs there.
Feel free to submit PRs related to the functionality of Forge here.