Format code according to conventions (qmk#12292)

Co-authored-by: QMK Bot <hello@qmk.fm>

drivers/chibios/ws2812_spi.c

@@ -34,15 +34,15 @@
 
 // Define SPI config speed
 // baudrate should target 3.2MHz
-// F072 fpclk = 48MHz 
+// F072 fpclk = 48MHz
 // 48/16 = 3Mhz
 #if WS2812_SPI_DIVISOR == 2
 #    define WS2812_SPI_DIVISOR (0)
 #elif WS2812_SPI_DIVISOR == 4
 #    define WS2812_SPI_DIVISOR (SPI_CR1_BR_0)
 #elif WS2812_SPI_DIVISOR == 8
 #    define WS2812_SPI_DIVISOR (SPI_CR1_BR_1)
-#elif WS2812_SPI_DIVISOR == 16                                  //same as default
+#elif WS2812_SPI_DIVISOR == 16  // same as default
 #    define WS2812_SPI_DIVISOR (SPI_CR1_BR_1 | SPI_CR1_BR_0)
 #elif WS2812_SPI_DIVISOR == 32
 #    define WS2812_SPI_DIVISOR (SPI_CR1_BR_2)
@@ -53,14 +53,14 @@
 #elif WS2812_SPI_DIVISOR == 256
 #    define WS2812_SPI_DIVISOR (SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0)
 #else
-#    define WS2812_SPI_DIVISOR (SPI_CR1_BR_1 | SPI_CR1_BR_0)    //default
+#    define WS2812_SPI_DIVISOR (SPI_CR1_BR_1 | SPI_CR1_BR_0)  // default
 #endif
 
 // Use SPI circular buffer
 #ifdef WS2812_SPI_USE_CIRCULAR_BUFFER
-#    define WS2812_SPI_BUFFER_MODE 1    //circular buffer
+#    define WS2812_SPI_BUFFER_MODE 1  // circular buffer
 #else
-#    define WS2812_SPI_BUFFER_MODE 0    //normal buffer
+#    define WS2812_SPI_BUFFER_MODE 0  // normal buffer
 #endif
 
 #define BYTES_FOR_LED_BYTE 4
@@ -112,10 +112,7 @@ void ws2812_init(void) {
     palSetLineMode(RGB_DI_PIN, WS2812_OUTPUT_MODE);
 
     // TODO: more dynamic baudrate
-    static const SPIConfig spicfg = {
-        WS2812_SPI_BUFFER_MODE, NULL, PAL_PORT(RGB_DI_PIN), PAL_PAD(RGB_DI_PIN),
-        WS2812_SPI_DIVISOR
-    };
+    static const SPIConfig spicfg = {WS2812_SPI_BUFFER_MODE, NULL, PAL_PORT(RGB_DI_PIN), PAL_PAD(RGB_DI_PIN), WS2812_SPI_DIVISOR};
 
     spiAcquireBus(&WS2812_SPI);     /* Acquire ownership of the bus.    */
     spiStart(&WS2812_SPI, &spicfg); /* Setup transfer parameters.       */