Single config entry setup

README.md

@@ -31,18 +31,6 @@ In the end your file structure should look like that:
 ```
 
 ## Configuration
-### Example configuration package
-You can use preconfigured integration package if your HA instance is configured to use packages. 
-You can check it by presence of `packages` directory in config folder and such code in `configuration.yaml`:
-```yaml
-homeassistant:
-  packages: !include_dir_merge_named packages
-```
-After that you can copy file [ina219_ups_hat.yaml](/examples/packages/ina219_ups_hat.yaml) to your `packages` folder & customize it.
-
-### Example automations
-Copy contents of [examples/automations.yaml](/examples/automations.yaml) to your `automations.yaml`. Customize.
-
 ### Sensor
 Create a new sensor entry in your `configuration.yaml` 
 
@@ -55,16 +43,17 @@ sensor:
     batteries_count: 3        # Optional
     max_soc: 91               # Optional
     battery_capacity: 9000    # Optional
+    sma_samples: 5            # Optional
 ```
 Following data can be read:
  - SoC (State of Charge)
- - PSU Voltage
- - Shunt Voltage
+ - Voltage
  - Current
  - Power
  - Charging Status
  - Online Status
- - Is Low Battery (< 20%)
+ - Remaining Capacity
+ - Remaining Time
 
 If you consistently experience capacity below 100% when the device is fully charged, you can adjust it using the `max_soc` property.
 
@@ -89,13 +78,8 @@ sensor:
 #### Batteries Count
 The original Waveshare UPS Hat has 2 batteries in series (8.4V), but some versions of the UPS Hats may have 3 batteries (12.6V). If you have more than 2 batteries in series, use the `batteries_count` parameter.
 
-### Binary Sensor
-In addition to the  sensor devices, you may also create a device which is simply “on” when the UPS status is online and “off” at all other times.
-
-```yaml
-binary_sensor:
-  - platform: ina219_ups_hat
-```
+### Example automations
+Copy contents of [examples/automations.yaml](/examples/automations.yaml) to your `automations.yaml`. Customize.
 
 ## Directions for installing smbus support on Raspberry Pi
 

custom_components/ina219_ups_hat/__init__.py

@@ -1 +1 @@
-"""Waveshare INA219 UPS Hat"""
+"""INA219 UPS Hat"""

custom_components/ina219_ups_hat/const.py

@@ -2,3 +2,28 @@
 MIN_CHARGING_CURRENT = 1
 MIN_BATTERY_CONNECTED_CURRENT = 0.1
 LOW_BATTERY_PERCENTAGE = 20
+
+DOMAIN = "ina219_ups_hat"
+DEFAULT_NAME = "ina219_ups_hat"
+
+CONF_BATTERY_CAPACITY = "battery_capacity"
+CONF_MAX_SOC = "max_soc"
+CONF_SMA_SAMPLES = "sma_samples"
+CONF_BATTERIES_COUNT = "batteries_count"
+CONF_SCAN_INTERVAL = "scan_interval"
+
+ATTR_CAPACITY = "capacity"
+ATTR_SOC = "soc"
+ATTR_REAL_SOC = "real_soc"
+ATTR_PSU_VOLTAGE = "psu_voltage"
+ATTR_SHUNT_VOLTAGE = "shunt_voltage"
+ATTR_LOAD_VOLTAGE = "load_voltage"
+ATTR_CURRENT = "current"
+ATTR_POWER = "power"
+ATTR_CHARGING = "charging"
+ATTR_ONLINE = "online"
+ATTR_BATTERY_CONNECTED = "battery_connected"
+ATTR_LOW_BATTERY = "low_battery"
+ATTR_POWER_CALCULATED = "power_calculated"
+ATTR_REMAINING_BATTERY_CAPACITY = "remaining_battery_capacity"
+ATTR_REMAINING_TIME = "remaining_time_min"

custom_components/ina219_ups_hat/coordinator.py

@@ -0,0 +1,93 @@
+import logging
+from .const import CONF_BATTERIES_COUNT, CONF_BATTERY_CAPACITY, CONF_MAX_SOC, CONF_SMA_SAMPLES, MIN_CHARGING_CURRENT, MIN_ONLINE_CURRENT
+from .ina219 import INA219
+from .ina219_wrapper import INA219Wrapper
+from homeassistant import core
+from homeassistant.const import CONF_NAME, CONF_UNIQUE_ID
+from homeassistant.helpers.typing import ConfigType
+from homeassistant.helpers.update_coordinator import (
+    DataUpdateCoordinator,
+    UpdateFailed,
+)
+import random
+
+_LOGGER = logging.getLogger(__name__)
+
+
+class INA219UpsHatCoordinator(DataUpdateCoordinator):
+    def __init__(self, hass: core.HomeAssistant, config: ConfigType) -> None:
+        """Initialize coordinator"""
+
+        self.name_prefix = config.get(CONF_NAME)
+        self.id_prefix = config.get(CONF_UNIQUE_ID)
+
+        self._max_soc = config.get(CONF_MAX_SOC)
+        self._battery_capacity = config.get(CONF_BATTERY_CAPACITY)
+        self._batteries_count = config.get(CONF_BATTERIES_COUNT)
+        self._sma_samples = config.get(CONF_SMA_SAMPLES)
+
+        self._ina219 = INA219(addr=0x41)
+        self._ina219_wrapper = INA219Wrapper(self._ina219, self._sma_samples)
+
+        super().__init__(
+            hass,
+            _LOGGER,
+            name="ina219_ups_hat",
+            update_method=self._update_data,
+        )
+
+    async def _update_data(self):
+        try:
+            ina219_wrapper = self._ina219_wrapper
+            ina219_wrapper.measureINAValues()
+
+            bus_voltage = ina219_wrapper.getBusVoltageSMA_V()  # voltage on V- (load side)
+            shunt_voltage = (ina219_wrapper.getShuntVoltageSMA_mV() / 1000) # voltage between V+ and V- across the shunt
+            current = ina219_wrapper.getCurrentSMA_mA()  # current in mA
+            power = ina219_wrapper.getPowerSMA_W()  # power in W
+
+            smooth_bus_voltage = ina219_wrapper.getBusVoltageSMAx2_V()
+            smooth_current = ina219_wrapper.getCurrentSMAx2_mA()
+
+            soc_c1 = 3 * self._batteries_count
+            soc_c2 = 1.2 * self._batteries_count
+            real_soc = (smooth_bus_voltage - soc_c1) / soc_c2 * 100
+            soc = (
+                (smooth_bus_voltage - soc_c1) /
+                (soc_c2 * (self._max_soc / 100.0)) * 100
+            )
+            if soc > 100:
+                soc = 100
+            if soc < 0:
+                soc = 0
+
+            power_calculated = bus_voltage * (current / 1000)
+
+            online = bool(current > MIN_ONLINE_CURRENT)
+            charging = bool(current > MIN_CHARGING_CURRENT)
+
+            if self._battery_capacity is None:
+                remaining_battery_capacity = None
+                remaining_time = None
+            else:
+                remaining_battery_capacity = (
+                    real_soc / 100.0) * self._battery_capacity
+                if not online:
+                    remaining_time = round(
+                        (remaining_battery_capacity / -smooth_current) * 60.0, 0
+                    )
+                else:
+                    remaining_time = None
+
+            return {
+                "voltage": round(bus_voltage + shunt_voltage, 2),
+                "current": round(current / 1000, 5),
+                "power": round(power_calculated, 2),
+                "soc": round(soc, 1),
+                "remaining_battery_capacity": round(remaining_battery_capacity, 0),
+                "remaining_time": remaining_time,
+                "online": online,
+                "charging": charging,
+            }
+        except Exception as e:
+            raise UpdateFailed(f"Error updating data: {e}")

custom_components/ina219_ups_hat/entity.py

@@ -0,0 +1,31 @@
+
+from .const import DOMAIN
+from .coordinator import INA219UpsHatCoordinator
+from homeassistant.helpers.device_registry import DeviceEntryType, DeviceInfo
+
+
+class INA219UpsHatEntity():
+    def __init__(self, coordinator: INA219UpsHatCoordinator) -> None:
+        self._coordinator = coordinator
+        self._device_id = self._coordinator.id_prefix
+
+    @property
+    def name(self):
+        return self._coordinator.name_prefix + ' ' + self._name
+
+    @property
+    def unique_id(self):
+        return self._coordinator.id_prefix + '_' + self._name
+
+    @property
+    def device_info(self) -> DeviceInfo:
+        """Return the device_info of the device."""
+        return DeviceInfo(
+            identifiers={(DOMAIN, self._coordinator.id_prefix)},
+            name=self._coordinator.name_prefix,
+            manufacturer="Some Chinese factory",
+            sw_version="0.3.0",
+        )
+
+    async def async_update(self):
+        await self._coordinator.async_request_refresh()

custom_components/ina219_ups_hat/ina219_wrapper.py

@@ -52,7 +52,7 @@ def _getSMMValue(self, buf:deque, divider:int=1):
             return np.median(self._getBufTail(buf, divider))
         return np.median(buf)
 
-    def _getBufTail(self, buf:deque, divider:int):
-        slice_start = len(buf) - int(len(buf) / divider)
+    def _getBufTail(self, buf: deque, divider: int):
+        slice_start = len(buf) - int(len(buf) / divider) - 1
         slice_end = len(buf)
         return list(buf)[slice_start:slice_end]

custom_components/ina219_ups_hat/manifest.json

@@ -8,5 +8,5 @@
   "iot_class": "local_polling",
   "issue_tracker": "https://github.com/odya/hass-ina219-ups-hat/issues",
   "requirements": ["smbus2>=0.4.2","numpy>=1.23.2"],
-  "version": "0.2.1"
+  "version": "0.3.0"
 }