[chore] follow codeql recommendation #10165
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
mx-psi
requested changes
May 16, 2024
There was a problem hiding this comment.
This breaks our compatibility promise: we are dropping support for Go 1.21.x for x less than 10. There were also recently some fixes upstream (see golang/go@27ed85d) that I think should make this message go away.
Happy to close this, however this PR does bring up a good question of whether we should support versions of go 1.21.x with known CVEs. |
We should definitely encourage using the latest version. We could add a In terms of support however, I don't think we lose much by continuing to support those versions, but we can discuss it! |
Right, I'm thinking that if we were to only support versions greater than any with known CVEs it would act as incentive to any consumers of the collector libraries to also update to newer versions. I can open a separate issue to discuss and close this PR after I do so. |
|
100% we should enforce latest (hopefully no CVEs) version when we build the final binary that we release as a binary, but for libraries like artifacts we cannot enforce this. |
CodeQL is currently reporting "Invalid Go toolchain version: As of Go 1.21, toolchain versions must use the 1.N.P syntax.". This PR attempts to fix this. Signed-off-by: Alex Boten <223565+codeboten@users.noreply.github.com>
codeboten
force-pushed
the
codeboten/update-go-mod-ver
branch
from
253773d
to
9cf098f
Compare
|
@mx-psi @bogdandrutu to appease codeql and ensure we continue to support all version 1.21, i updated the version in go.mod to 1.21.0 |
Codecov ReportAll modified and coverable lines are covered by tests ✅
Additional details and impacted files@@ Coverage Diff @@
## main #10165 +/- ##
==========================================
+ Coverage 91.90% 91.98% +0.08%
==========================================
Files 361 361
Lines 16970 16968 -2
==========================================
+ Hits 15596 15608 +12
+ Misses 1032 1020 -12
+ Partials 342 340 -2 ☔ View full report in Codecov by Sentry. |
mx-psi
approved these changes
May 22, 2024
Signed-off-by: Alex Boten <223565+codeboten@users.noreply.github.com>
andrzej-stencel
pushed a commit
to andrzej-stencel/opentelemetry-collector
that referenced
this pull request
May 27, 2024
CodeQL is currently reporting "Invalid Go toolchain version: As of Go 1.21, toolchain versions must use the 1.N.P syntax.". This PR attempts to fix this. --------- Signed-off-by: Alex Boten <223565+codeboten@users.noreply.github.com>
krajorama
added a commit
to prometheus/prometheus
that referenced
this pull request
Jun 5, 2024
These bring in a hard dependecy on toolchain we don't want via open-telemetry/opentelemetry-collector#10165 The dependency should be going away open-telemetry/opentelemetry-collector#10165 (review) Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com>
steves-canva
pushed a commit
to Canva/opentelemetry-collector
that referenced
this pull request
Jun 14, 2024
CodeQL is currently reporting "Invalid Go toolchain version: As of Go 1.21, toolchain versions must use the 1.N.P syntax.". This PR attempts to fix this. --------- Signed-off-by: Alex Boten <223565+codeboten@users.noreply.github.com>
coleenquadros
pushed a commit
to stolostron/prometheus
that referenced
this pull request
Jul 30, 2024
* makefile: let golangci-lint also run on arm64 Signed-off-by: Mickael Carl <mcarl@apple.com> * docs: add a quick note on linting in contributing guidelines Signed-off-by: Mickael Carl <mcarl@apple.com> * chore:fix typo Signed-off-by: tyltr <tylitianrui@126.com> * Code optimization: The relabel operation is used very frequently, and strconv.FormatInt() with better performance should be used. Signed-off-by: roger.wang <roger.wang@cloudwise.com> * Clarify batch_send_deadline docs This is the time period covered by a batch of samples, when the number of waiting samples is lower than max_samples_per_send. It does not affect timeouts or retries. Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com> Signed-off-by: Federico Leva <federico.leva@relexsolutions.com> * chore(tsdb): add a sandboxDir to DBReadOnly, the directory can be used for transient file writes. use it in loadDataAsQueryable to make sure the RO Head doesn't truncate or cut new chunks in data/chunks_head/. add a -sandbox-dir-root flag to "promtool tsdb dump/dump-openmetrics" to control the root of that sandbox dirrectory. Signed-off-by: machine424 <ayoubmrini424@gmail.com> * refactor: add max func to maxTimestamp Signed-off-by: komisan19 <18901496+komisan19@users.noreply.github.com> * fix Signed-off-by: komisan19 <18901496+komisan19@users.noreply.github.com> * Rule Manager: Add `rule_group_last_restore_duration_seconds` to measure restore time per rule group When a rule group changes or prometheus is restarted we need to ensure we restore the active alerts that were firing for a corresponding rule, for that Prometheus uses the `ALERTS_FOR_STATE` series to query the previous state and restore it. If a given rule has high cardinality (think 100s of 1000s for series) this proccess can take a bit of time - this is the first of a series of PRs to improve this problem and I'd like to start with exposing the time it takes to restore a rule group as a gauge. Signed-off-by: gotjosh <josue.abreu@gmail.com> * docs: storage.md: clarify storage.tsdb.retention.time description Signed-off-by: tesla59 <nishant@heim.id> * Change variable name to `restoreStartTime` from `now` and introduce a log line to record total time Signed-off-by: gotjosh <josue.abreu@gmail.com> * Add a changelog entry Signed-off-by: gotjosh <josue.abreu@gmail.com> * Improve the metric description Signed-off-by: gotjosh <josue.abreu@gmail.com> * Avoid creating new slices for labels values on postings for matchers (#13958) * Avoid creating new slices for labels values on postings for matchers Signed-off-by: alanprot <alanprot@gmail.com> * refactor Signed-off-by: alanprot <alanprot@gmail.com> --------- Signed-off-by: alanprot <alanprot@gmail.com> * Rule Manager: Only query once per alert rule when restoring alert state Prometheus restores alert state between restarts and updates. For each rule, it looks at the alerts that are meant to be active and then queries the `ALERTS_FOR_STATE` series for _each_ alert within the rules. If the alert rule has 120 instances (or series) it'll execute the same query with slightly different labels. This PR changes the approach so that we only query once per alert rule and then match the corresponding alert that we're about to restore against the series-set. While the approach might use a bit more memory at start-up (if even?) the restore proccess is only ran once per restart so I'd consider this a big win. This builds on top of #13974 Signed-off-by: gotjosh <josue.abreu@gmail.com> * bug: nil check against the series set not errors Signed-off-by: gotjosh <josue.abreu@gmail.com> * Fix tests and a bug with the series lookup logic. Signed-off-by: gotjosh <josue.abreu@gmail.com> * Use the string representation of the labels instead of the hash Signed-off-by: gotjosh <josue.abreu@gmail.com> * - Add a changelog entry - Improve variable name of the map produced by the series set Signed-off-by: gotjosh <josue.abreu@gmail.com> * Allow the result map for the series set before hand with a hint. Signed-off-by: gotjosh <josue.abreu@gmail.com> * fix typo Signed-off-by: gotjosh <josue.abreu@gmail.com> * bugfix: Decouple native histogram ingestions and protobuf parsing Up until this point, if a scrape was done with the protobuf format Prometheus would always try to ingest native histograms even with the feature flag disabled. This causes problems with other feature-flags that depend on the protobuf format, like 'created-timestamp-zero-ingestion'. This commit decouples native histogram parsing from ingestion, making sure ingestion only happens when the 'native-histogram' feature-flag is enabled. Signed-off-by: Arthur Silva Sens <arthur.sens@coralogix.com> * Improve comments around resending resolved alerts (#13990) Signed-off-by: George Robinson <george.robinson@grafana.com> * discovery(k8s): Only register client-go metrics adapters when needed Previously the metrics adapters for client-go were registered in an init function. This resulted in clobbering default metrics providers when these packages are imported into an application that leverages the default client-go metrics registry. Instead, let's only register these adapters when requested. Signed-off-by: Stephen Heckler <sheckler@cloudflare.com> * Update docs/storage.md Co-authored-by: Ayoub Mrini <ayoubmrini424@gmail.com> Signed-off-by: Nishant Singh <nishant@heim.id> * Update docs/storage.md Co-authored-by: Ayoub Mrini <ayoubmrini424@gmail.com> Signed-off-by: Nishant Singh <nishant@heim.id> * fix(scaleway-sd): use public IPs if no private IP present (#13941) * fix(scaleway-sd): use public IPs if no private IP present * tests(scaleway-sd): add instance with routed public ip and no private ip --------- Signed-off-by: Heyoxe <32708033+Heyoxe@users.noreply.github.com> * UTF-8: updates UI parser to support UTF-8 characters (#13590) Signed-off-by: Neeraj Gartia <neerajgartia211002@gmail.com> * fix Signed-off-by: komisan19 <18901496+komisan19@users.noreply.github.com> * fix(promql/query_logger): close file in error handling (#13948) Signed-off-by: guoguangwu <guoguangwug@gmail.com> * otlp: Prometheus to own its own copy of the otlptranslator package (#13991) After a lot of productive discussion between the Prometheus and OpenTelemetry community we decided that it made sense for Prometheus to own its own copy of the code in charge for handling OTLP ingestion traffic. This commit is removing the README and update-copy.sh files that had the previous steps to update the code. Also it is updating the licensing of all the files to make sure the OpenTelemetry provenance is explicit and to state the new ownership. Signed-off-by: Jesus Vazquez <jesusvzpg@gmail.com> Co-authored-by: Arve Knudsen <arve.knudsen@gmail.com> * docs: [ovh sd] Added missing label for OVH dedicated server in service discovery doc Signed-off-by: Jiekun <zhujiekun@52tt.com> * OTLP: Use PrometheusConverter directly Signed-off-by: Arve Knudsen <arve.knudsen@gmail.com> * prometheusremotewrite: Add PrometheusConverter.FromMetrics benchmark Signed-off-by: Arve Knudsen <arve.knudsen@gmail.com> * Add an assertion on the count of alerts before adding an active alert Signed-off-by: gotjosh <josue.abreu@gmail.com> * Rename QueryforStateSeries to QueryForStateSeries Signed-off-by: gotjosh <josue.abreu@gmail.com> * Use labels.Len() instead of manually counting the labels Signed-off-by: gotjosh <josue.abreu@gmail.com> * Remove duplicated sorted and assignment of expected alerts. Signed-off-by: gotjosh <josue.abreu@gmail.com> * Rename `alerts` to `expectedAlerts` in the test case input Signed-off-by: gotjosh <josue.abreu@gmail.com> * querier.Select cannot return a nil series set. Signed-off-by: gotjosh <josue.abreu@gmail.com> * ci: check generated parser code before running unit tests Check that the generated parser code is consistent with the input definition. Remove the file before re-generating to make sure that missing goyacc is not effecting the check. Fixes: #7488 Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com> * Add missing OTLP fixes to changelog (#14014) Signed-off-by: Arve Knudsen <arve.knudsen@gmail.com> * prometheusremotewrite: Move TimeSeries method to timeseries.go To facilitate generating OTel translation code for other Prometheus compatible backends, modify the prometheusremotewrite sources slightly so that the PrometheusConverter.TimeSeries method is in a file called timeseries.go. The rationale is to allow other backends to define their own implementation of this method. Signed-off-by: Arve Knudsen <arve.knudsen@gmail.com> * Update promu Update promu to the latest release. Signed-off-by: SuperQ <superq@gmail.com> * build(deps): bump golangci/golangci-lint-action in /scripts Bumps [golangci/golangci-lint-action](https://github.com/golangci/golangci-lint-action) from 4.0.0 to 5.1.0. - [Release notes](https://github.com/golangci/golangci-lint-action/releases) - [Commits](https://github.com/golangci/golangci-lint-action/compare/3cfe3a4abbb849e10058ce4af15d205b6da42804...9d1e0624a798bb64f6c3cea93db47765312263dc) --- updated-dependencies: - dependency-name: golangci/golangci-lint-action dependency-type: direct:production update-type: version-update:semver-major ... Signed-off-by: dependabot[bot] <support@github.com> * build(deps): bump actions/checkout from 4.1.2 to 4.1.4 Bumps [actions/checkout](https://github.com/actions/checkout) from 4.1.2 to 4.1.4. - [Release notes](https://github.com/actions/checkout/releases) - [Changelog](https://github.com/actions/checkout/blob/main/CHANGELOG.md) - [Commits](https://github.com/actions/checkout/compare/9bb56186c3b09b4f86b1c65136769dd318469633...0ad4b8fadaa221de15dcec353f45205ec38ea70b) --- updated-dependencies: - dependency-name: actions/checkout dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com> * build(deps): bump actions/upload-artifact from 4.3.1 to 4.3.3 Bumps [actions/upload-artifact](https://github.com/actions/upload-artifact) from 4.3.1 to 4.3.3. - [Release notes](https://github.com/actions/upload-artifact/releases) - [Commits](https://github.com/actions/upload-artifact/compare/5d5d22a31266ced268874388b861e4b58bb5c2f3...65462800fd760344b1a7b4382951275a0abb4808) --- updated-dependencies: - dependency-name: actions/upload-artifact dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com> * build(deps): bump github.com/prometheus/prometheus Bumps [github.com/prometheus/prometheus](https://github.com/prometheus/prometheus) from 0.51.1 to 0.51.2. - [Release notes](https://github.com/prometheus/prometheus/releases) - [Changelog](https://github.com/prometheus/prometheus/blob/main/CHANGELOG.md) - [Commits](https://github.com/prometheus/prometheus/compare/v0.51.1...v0.51.2) --- updated-dependencies: - dependency-name: github.com/prometheus/prometheus dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com> * build(deps): bump github.com/linode/linodego from 1.32.0 to 1.33.0 Bumps [github.com/linode/linodego](https://github.com/linode/linodego) from 1.32.0 to 1.33.0. - [Release notes](https://github.com/linode/linodego/releases) - [Commits](https://github.com/linode/linodego/compare/v1.32.0...v1.33.0) --- updated-dependencies: - dependency-name: github.com/linode/linodego dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com> * build(deps): bump google.golang.org/api from 0.174.0 to 0.177.0 Bumps [google.golang.org/api](https://github.com/googleapis/google-api-go-client) from 0.174.0 to 0.177.0. - [Release notes](https://github.com/googleapis/google-api-go-client/releases) - [Changelog](https://github.com/googleapis/google-api-go-client/blob/main/CHANGES.md) - [Commits](https://github.com/googleapis/google-api-go-client/compare/v0.174.0...v0.177.0) --- updated-dependencies: - dependency-name: google.golang.org/api dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com> * removed formateoverview section (#13994) docs: Remove outdated information about remote-read API --------- Signed-off-by: kushagra Shukla <kushalshukla110@gmail.com> Signed-off-by: Kushal shukla <85934954+kushalShukla-web@users.noreply.github.com> Signed-off-by: Arthur Silva Sens <arthur.sens@coralogix.com> Co-authored-by: Arthur Silva Sens <arthur.sens@coralogix.com> * BUGFIX: Mark the rule's restoration process as completed always (#14048) * BUGFIX: Mark the rule's restoration process as completed always In https://github.com/prometheus/prometheus/pull/13980 I introduced a change to reduce the number of queries executed when we restore alert statuses. With this, the querying semantics changed as we now need to go through all series before we enter the alert restoration loop and I missed the fact that exiting early when there are no rules to restore would lead to an incomplete restoration. An alert being restored is used as a proxy for "we're now ready to write `ALERTS/ALERTS_FOR_SERIES` metrics" so as a result we weren't writing the series if we didn't restore anything the first time around. --------- Signed-off-by: gotjosh <josue.abreu@gmail.com> * Fix `parser.VectorSelector.String()` with empty name matcher (#14015) The check fell into "this matcher equals vector selector's name" case when vector selector doesn't have a name and the matcher is an explicit matcher for an empty __name__ label. To provide some context about why this is important: some downstream projects use the promql.Parse(expr.String()) to clone an expression's AST, and with this bug that matcher disappears in the cloning. Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> * Fix FastRegexMatcher matching multibyte runes with . (#14059) When `zeroOrOneCharacterStringMatcher` wach checking the input string, it assumed that if there are more than one bytes, then there are more than one runes, but that's not necessarily true. Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> * bugfix: allow opting-out of multi-cluster setups Allow users to opt-out of the multi-cluster setup for Prometheus dashboard, in environments where it isn't applicable. Refer: https://github.com/prometheus/prometheus/pull/13180. Signed-off-by: Pranshu Srivastava <rexagod@gmail.com> * [REFACTOR] PromQL: simplify rangeEvalTimestampFunctionOverVectorSelector (#14021) The function `rangeEvalTimestampFunctionOverVectorSelector` appeared to be checking histogram size, however the value it used was always 0 due to subtle variable shadowing. However we don't need to pass sample values to the `timestamp` function, since the latter only cares about timestamps. This also affects peak sample count in statistics, since we are no longer copying histogram samples. Signed-off-by: Arve Knudsen <arve.knudsen@gmail.com> * tsdb/chunkenc.Pool: Refactor Get and Put Signed-off-by: Arve Knudsen <arve.knudsen@gmail.com> * refactor: extract almost.Equal() to new package To avoid a circular reference between promql and promqltest. Signed-off-by: Bryan Boreham <bjboreham@gmail.com> * test: turn TestKahanSum into scripted test This saves having a function solely to call kahanSumInc. Signed-off-by: Bryan Boreham <bjboreham@gmail.com> * test: check for @-modifier without using engine internals Signed-off-by: Bryan Boreham <bjboreham@gmail.com> * test: move test files into new promqltest package So that promql package does not bring in test-only dependencies. Signed-off-by: Bryan Boreham <bjboreham@gmail.com> * test: move promqltest tests together with the implementation Signed-off-by: Bryan Boreham <bjboreham@gmail.com> * test: make field initializers explicit Lint started complaining after I moved the file. Signed-off-by: Bryan Boreham <bjboreham@gmail.com> * test: clean up promqltest package references So it nearly compiles. Signed-off-by: Bryan Boreham <bjboreham@gmail.com> * Quote label name in matchers when needed When the label name of a matcher contains non-standard characters, like a dot, or starts with a digit, it should be quoted. If it's not quoted, then `VectorSelector.String()` isn't a valid PromQL. Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> * Optimize Matcher.String() Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> * refactor: Move NewTestEngine into promqltest And export `DefaultMaxSamplesPerQuery` so callers can replicate previous behaviour. Signed-off-by: Bryan Boreham <bjboreham@gmail.com> * promql: export NewTestQuery So that tests can call it from another package. Signed-off-by: Bryan Boreham <bjboreham@gmail.com> * test: add promqltest package references To packages outside of promql. Signed-off-by: Bryan Boreham <bjboreham@gmail.com> * refactor: extract some PromQL Engine tests which use unexported structs Signed-off-by: Bryan Boreham <bjboreham@gmail.com> * test: move most PromQL tests into separate test package So that they can import promqltest which imports promql. Signed-off-by: Bryan Boreham <bjboreham@gmail.com> * Fix language in docs and comments (#14041) Fix language in docs and comments --------- Signed-off-by: Arve Knudsen <arve.knudsen@gmail.com> Co-authored-by: Björn Rabenstein <github@rabenste.in> * test: PromQL: stop using internal fields of engine * set enablePerStepStats and lookback duration via `NewTestEngine` parameters. * check maxSamples by recreating query engine * check lookback without modifying internals Signed-off-by: Bryan Boreham <bjboreham@gmail.com> * Use bytes.Buffer from stack buf in Matcher.String() Also removed the growing until there's a benchmark for that. Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> * [ENHANCEMENT] TSDB: Optimize querying with regexp matchers Add method `PostingsForLabelMatching` to `tsdb.IndexReader`, to obtain postings for labels with a certain name and values accepted by a provided callback, and use it from `tsdb.PostingsForMatchers`. The intention is to optimize regexp matcher paths, especially not having to load all label values before matching on them. Plus tests, and refactor some `tsdb/index.Reader` methods. Benchmarking shows memory reduction up to ~100%, and speedup of up to ~50%. Signed-off-by: Arve Knudsen <arve.knudsen@gmail.com> Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com> * promql.ActiveQueryTracker: Unmap mmapped file when done Signed-off-by: Arve Knudsen <arve.knudsen@gmail.com> * otlp: Remove OTel feature gate registration from copied translation package (#13932) Signed-off-by: Anthony J Mirabella <a9@aneurysm9.com> Signed-off-by: Jesus Vazquez <jesusvzpg@gmail.com> * Add failing test case Signed-off-by: Charles Korn <charles.korn@grafana.com> * Ensure series in matrix values returned for instant queries are always sorted Signed-off-by: Charles Korn <charles.korn@grafana.com> * Capture timing information while sorting Signed-off-by: Charles Korn <charles.korn@grafana.com> * Benchmark zeroOrOneCharacterStringMatcher.Matches This adds some more test cases for unicode values, and also a benchmark for zeroOrOneCharacterStringMatcher.Matches() Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> * Use utf8.DecodeRuneInString(s) This replaces the custom `moreThanOneRune` function with the standard `utf8.DecodeRuneInString(s)` that can be used to figure out the size of the first rune. Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> * Add invalid utf8 test cases to regexp Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> * Check utf8.RuneError result Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> * adds TestNativeHistogramRate func to promql test framework Signed-off-by: Neeraj Gartia <neerajgartia211002@gmail.com> * adds test for native histogram rate func in promql testing framework Signed-off-by: Neeraj Gartia <neerajgartia211002@gmail.com> * adds test for sum, count, stddev, stdvar, quantile and fraction func to promql testing framework Signed-off-by: Neeraj Gartia <neerajgartia211002@gmail.com> * some nits Signed-off-by: Neeraj Gartia <neerajgartia211002@gmail.com> * removes the added tests from engine_test.go Signed-off-by: Neeraj Gartia <neerajgartia211002@gmail.com> * [TEST] Rules: Sleep 15ms to fit Windows behaviour better On Windows, Go will sleep 15ms if you ask for less. TestAsyncRuleEvaluation compares actual delay to the nominal time, so using 15ms should work better on Windows, and be hardly noticeable elsewhere. Signed-off-by: Bryan Boreham <bjboreham@gmail.com> * tsdb: check for context cancel before regex matching postings (#14096) * tsdb: check for context cancel before regex matching postings Regex matching can be heavy if the regex takes a lot of cycles to evaluate and we can get stuck evaluating postings for a long time without this fix. The constant checkContextEveryNIterations=100 may be changed later. Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com> * tsdb/index/postings: fix missing lock unlock Followup to #14096 Unfortunately the previous PR introduced this bug by not releasing the lock before returning. Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com> * Enable perfsprint linter and fix up code Signed-off-by: Oleksandr Redko <oleksandr.red+github@gmail.com> * Fix flaky test Signed-off-by: Arve Knudsen <arve.knudsen@gmail.com> * tsdb/index: Refactor Reader tests (#14071) tsdb/index: Refactor Reader tests Co-authored-by: Björn Rabenstein <github@rabenste.in> Signed-off-by: Arve Knudsen <arve.knudsen@gmail.com> --------- Signed-off-by: Arve Knudsen <arve.knudsen@gmail.com> Co-authored-by: Björn Rabenstein <github@rabenste.in> * Document sorting behaviour Signed-off-by: Charles Korn <charles.korn@grafana.com> * added line When set, query.max-concurrency may need to be adjusted accordingly. Signed-off-by: kushagra Shukla <kushalshukla110@gmail.com> Signed-off-by: kushagra Shukla <kushalshukla110@gmail.com> * web/api: export defaultStatsRenderer (#14121) defaultStatsRenderer->DefaultStatsRenderer Add short docstrings. I'd like to use the stats renderer to peek at the statistics in https://github.com/grafana/mimir/pull/7966 However I cannot call the original function without this export afterwards. Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com> * Check context every 128 labels instead of 100 (#14118) Follow up on https://github.com/prometheus/prometheus/pull/14096 As promised, I bring a benchmark, which shows a very small improvement if context is checked every 128 iterations of label instead of every 100. It's much easier for a computer to check modulo 128 than modulo 100. This is a very small 0-2% improvement but I'd say this is one of the hottest paths of the app so this is still relevant. Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> * doc: Clarify the limits of dumping/backfilling via OpenMetrics This is about native histograms (not yet supported) and staleness markers (for which OpenMetrics support isn't even planned). Signed-off-by: beorn7 <beorn@grafana.com> * fix(api): Send warnings only if the limit is really exceeded (#14116) for the the series, label names and label values APIs Add warnings count check to TestEndpoints The limit param was added in https://github.com/prometheus/prometheus/pull/13396 Signed-off-by: machine424 <ayoubmrini424@gmail.com> * fix: correct the typo in azuread sdk auth (#14106) Signed-off-by: Jayapriya Pai <janantha@redhat.com> * .gitpod.Dockerfile: Auto-fetch Go and goyacc vers In this commit we auto-fetch Go version from go.mod and goyacc version from Makefile in the Prometheus repo. Signed-off-by: Mohamed Awnallah <mohamedmohey2352@gmail.com> * Fix head stats and hooks when replaying a corrupted snapshot (#14079) * Fixing head stats and hooks when replaying a corrupted snapshot Signed-off-by: alanprot <alanprot@gmail.com> * Fixing create/removed series metrics Signed-off-by: alanprot <alanprot@gmail.com> * Refactoring to have common code between gc and flush method Signed-off-by: alanprot <alanprot@gmail.com> * Update tsdb/head.go Co-authored-by: Ayoub Mrini <ayoubmrini424@gmail.com> Signed-off-by: Alan Protasio <alanprot@gmail.com> * refactor Signed-off-by: alanprot <alanprot@gmail.com> * Update tsdb/head_test.go Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com> Signed-off-by: Alan Protasio <alanprot@gmail.com> * Update tsdb/head_test.go Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com> Signed-off-by: Alan Protasio <alanprot@gmail.com> --------- Signed-off-by: alanprot <alanprot@gmail.com> Signed-off-by: Alan Protasio <alanprot@gmail.com> Co-authored-by: Ayoub Mrini <ayoubmrini424@gmail.com> Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com> * Join errors Signed-off-by: Arve Knudsen <arve.knudsen@gmail.com> * docs/configuration: clarify OpenStack metadata labels (#14149) On several occasions, users assumed that the `__meta_openstack_tag_<key>` labels were about tags [1] instead of metadata [2]. While we can't really change the Prometheus label name, we can at least clarify in the documentation what's the information carried in the label. [1] https://specs.openstack.org/openstack/api-wg/guidelines/tags.html [2] https://docs.openstack.org/api-ref/compute/#server-metadata-servers-metadata Signed-off-by: Simon Pasquier <spasquie@redhat.com> * BUGFIX: Need seperate listOptions structs since linodego writes into them for pagination Signed-off-by: David Andruczyk <dandrucz@akamai.com> * Upgrade to golangci-lint v1.59.0 Signed-off-by: Arve Knudsen <arve.knudsen@gmail.com> * Bump golangci-lint action (#14154) * Bump golangci-lint action to 6.0.1 * Synchronize script/golangci-lint.yml and workflows/ci.yml Signed-off-by: Matthieu MOREL <matthieu.morel35@gmail.com> * Enable additional Go metrics Enable some additioal Go runtime metrics in order to observe additional performance data. Enables a number of new metrics: ``` HELP go_gc_cycles_automatic_gc_cycles_total Count of completed GC cycles generated by the Go runtime. HELP go_gc_cycles_forced_gc_cycles_total Count of completed GC cycles forced by the application. HELP go_gc_cycles_total_gc_cycles_total Count of all completed GC cycles. HELP go_gc_gogc_percent Heap size target percentage configured by the user, otherwise 100. This value is set by the GOGC environment variable, and the runtime/debug.SetGCPercent function. HELP go_gc_gomemlimit_bytes Go runtime memory limit configured by the user, otherwise math.MaxInt64. This value is set by the GOMEMLIMIT environment variable, and the runtime/debug.SetMemoryLimit function. HELP go_gc_heap_allocs_by_size_bytes Distribution of heap allocations by approximate size. Bucket counts increase monotonically. Note that this does not include tiny objects as defined by /gc/heap/tiny/allocs:objects, only tiny blocks. HELP go_gc_heap_allocs_bytes_total Cumulative sum of memory allocated to the heap by the application. HELP go_gc_heap_allocs_objects_total Cumulative count of heap allocations triggered by the application. Note that this does not include tiny objects as defined by /gc/heap/tiny/allocs:objects, only tiny blocks. HELP go_gc_heap_frees_by_size_bytes Distribution of freed heap allocations by approximate size. Bucket counts increase monotonically. Note that this does not include tiny objects as defined by /gc/heap/tiny/allocs:objects, only tiny blocks. HELP go_gc_heap_frees_bytes_total Cumulative sum of heap memory freed by the garbage collector. HELP go_gc_heap_frees_objects_total Cumulative count of heap allocations whose storage was freed by the garbage collector. Note that this does not include tiny objects as defined by /gc/heap/tiny/allocs:objects, only tiny blocks. HELP go_gc_heap_goal_bytes Heap size target for the end of the GC cycle. HELP go_gc_heap_live_bytes Heap memory occupied by live objects that were marked by the previous GC. HELP go_gc_heap_objects_objects Number of objects, live or unswept, occupying heap memory. HELP go_gc_heap_tiny_allocs_objects_total Count of small allocations that are packed together into blocks. These allocations are counted separately from other allocations because each individual allocation is not tracked by the runtime, only their block. Each block is already accounted for in allocs-by-size and frees-by-size. HELP go_gc_limiter_last_enabled_gc_cycle GC cycle the last time the GC CPU limiter was enabled. This metric is useful for diagnosing the root cause of an out-of-memory error, because the limiter trades memory for CPU time when the GC's CPU time gets too high. This is most likely to occur with use of SetMemoryLimit. The first GC cycle is cycle 1, so a value of 0 indicates that it was never enabled. HELP go_gc_pauses_seconds Deprecated. Prefer the identical /sched/pauses/total/gc:seconds. HELP go_gc_scan_globals_bytes The total amount of global variable space that is scannable. HELP go_gc_scan_heap_bytes The total amount of heap space that is scannable. HELP go_gc_scan_stack_bytes The number of bytes of stack that were scanned last GC cycle. HELP go_gc_scan_total_bytes The total amount space that is scannable. Sum of all metrics in /gc/scan. HELP go_gc_stack_starting_size_bytes The stack size of new goroutines. HELP go_sched_gomaxprocs_threads The current runtime.GOMAXPROCS setting, or the number of operating system threads that can execute user-level Go code simultaneously. HELP go_sched_goroutines_goroutines Count of live goroutines. HELP go_sched_latencies_seconds Distribution of the time goroutines have spent in the scheduler in a runnable state before actually running. Bucket counts increase monotonically. HELP go_sched_pauses_stopping_gc_seconds Distribution of individual GC-related stop-the-world stopping latencies. This is the time it takes from deciding to stop the world until all Ps are stopped. This is a subset of the total GC-related stop-the-world time (/sched/pauses/total/gc:seconds). During this time, some threads may be executing. Bucket counts increase monotonically. HELP go_sched_pauses_stopping_other_seconds Distribution of individual non-GC-related stop-the-world stopping latencies. This is the time it takes from deciding to stop the world until all Ps are stopped. This is a subset of the total non-GC-related stop-the-world time (/sched/pauses/total/other:seconds). During this time, some threads may be executing. Bucket counts increase monotonically. HELP go_sched_pauses_total_gc_seconds Distribution of individual GC-related stop-the-world pause latencies. This is the time from deciding to stop the world until the world is started again. Some of this time is spent getting all threads to stop (this is measured directly in /sched/pauses/stopping/gc:seconds), during which some threads may still be running. Bucket counts increase monotonically. HELP go_sched_pauses_total_other_seconds Distribution of individual non-GC-related stop-the-world pause latencies. This is the time from deciding to stop the world until the world is started again. Some of this time is spent getting all threads to stop (measured directly in /sched/pauses/stopping/other:seconds). Bucket counts increase monotonically. ``` Signed-off-by: SuperQ <superq@gmail.com> * Prepare v2.52.1 release Signed-off-by: Arthur Silva Sens <arthursens2005@gmail.com> * optimize regex matching for empty label values in posting match (#14075) Also update tests. Signed-off-by: Ben Ye <benye@amazon.com> * [Test] TSDB: let BenchmarkAddExemplar reuse slots Test with different amounts of capacity and exemplars, so that sometimes new exemplars are evicting older exemplars. Signed-off-by: Bryan Boreham <bjboreham@gmail.com> * [Test] TSDB: BenchmarkResizeExemplar multiple per series One exemplar per series is not a typical workload. Make it the same as `BenchmarkAddExemplar`. Signed-off-by: Bryan Boreham <bjboreham@gmail.com> * [ENHANCEMENT] TSDB: Reduce map lookups on exemplar index In many cases we already have a pointer to the entry. Signed-off-by: Bryan Boreham <bjboreham@gmail.com> * [ENHANCEMENT] TSDB: Eliminate pointer when storing exemplars Saves memory and effort. Signed-off-by: Bryan Boreham <bjboreham@gmail.com> * [ENHANCEMENT] TSDB: let Resize re-use buffer This saves having to zero the buffer every time. Signed-off-by: Bryan Boreham <bjboreham@gmail.com> * [ENHANCEMENT] TSDB: Save map lookup on validation Goes faster. Signed-off-by: Bryan Boreham <bjboreham@gmail.com> * Feature: Allow configuration of a rule evaluation delay (#14061) * [PATCH] Allow having evaluation delay for rule groups Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * [PATCH] Fix lint Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * [PATCH] Move the option to ManagerOptions Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * [PATCH] Include evaluation_delay in the group config Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> * Fix comments Signed-off-by: gotjosh <josue.abreu@gmail.com> * Add a server configuration option. Signed-off-by: gotjosh <josue.abreu@gmail.com> * Appease the linter #1 Signed-off-by: gotjosh <josue.abreu@gmail.com> * Add the new server flag documentation Signed-off-by: gotjosh <josue.abreu@gmail.com> * Improve documentation of the new flag and configuration Signed-off-by: gotjosh <josue.abreu@gmail.com> * Use named parameters for clarity on the `Rule` interface Signed-off-by: gotjosh <josue.abreu@gmail.com> * Add `initial` to the flag help Signed-off-by: gotjosh <josue.abreu@gmail.com> * Change the CHANGELOG area from `ruler` to `rules` Signed-off-by: gotjosh <josue.abreu@gmail.com> * Rename evaluation_delay to `rule_query_offset`/`query_offset` and make it a global configuration option. Signed-off-by: gotjosh <josue.abreu@gmail.com> E Your branch is up to date with 'origin/gotjosh/evaluation-delay'. * more docs Signed-off-by: gotjosh <josue.abreu@gmail.com> * Improve wording on CHANGELOG Signed-off-by: gotjosh <josue.abreu@gmail.com> * Add `RuleQueryOffset` to the default config in tests in case it changes Signed-off-by: gotjosh <josue.abreu@gmail.com> * Update docs/configuration/recording_rules.md Co-authored-by: Julius Volz <julius.volz@gmail.com> Signed-off-by: gotjosh <josue.abreu@gmail.com> * Rename `RuleQueryOffset` to `QueryOffset` when in the group context. Signed-off-by: gotjosh <josue.abreu@gmail.com> * Improve docstring and documentation on the `rule_query_offset` Signed-off-by: gotjosh <josue.abreu@gmail.com> --------- Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> Signed-off-by: gotjosh <josue.abreu@gmail.com> Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com> Co-authored-by: Julius Volz <julius.volz@gmail.com> * build(deps): bump github.com/prometheus/client_golang Bumps [github.com/prometheus/client_golang](https://github.com/prometheus/client_golang) from 1.19.0 to 1.19.1. - [Release notes](https://github.com/prometheus/client_golang/releases) - [Changelog](https://github.com/prometheus/client_golang/blob/main/CHANGELOG.md) - [Commits](https://github.com/prometheus/client_golang/compare/v1.19.0...v1.19.1) --- updated-dependencies: - dependency-name: github.com/prometheus/client_golang dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com> * build(deps): bump actions/checkout from 4.1.4 to 4.1.6 Bumps [actions/checkout](https://github.com/actions/checkout) from 4.1.4 to 4.1.6. - [Release notes](https://github.com/actions/checkout/releases) - [Changelog](https://github.com/actions/checkout/blob/main/CHANGELOG.md) - [Commits](https://github.com/actions/checkout/compare/v4.1.4...a5ac7e51b41094c92402da3b24376905380afc29) --- updated-dependencies: - dependency-name: actions/checkout dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com> * build(deps): bump ossf/scorecard-action from 2.3.1 to 2.3.3 Bumps [ossf/scorecard-action](https://github.com/ossf/scorecard-action) from 2.3.1 to 2.3.3. - [Release notes](https://github.com/ossf/scorecard-action/releases) - [Changelog](https://github.com/ossf/scorecard-action/blob/main/RELEASE.md) - [Commits](https://github.com/ossf/scorecard-action/compare/0864cf19026789058feabb7e87baa5f140aac736...dc50aa9510b46c811795eb24b2f1ba02a914e534) --- updated-dependencies: - dependency-name: ossf/scorecard-action dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com> * build(deps): bump github.com/hetznercloud/hcloud-go/v2 Bumps [github.com/hetznercloud/hcloud-go/v2](https://github.com/hetznercloud/hcloud-go) from 2.7.2 to 2.9.0. - [Release notes](https://github.com/hetznercloud/hcloud-go/releases) - [Changelog](https://github.com/hetznercloud/hcloud-go/blob/main/CHANGELOG.md) - [Commits](https://github.com/hetznercloud/hcloud-go/compare/v2.7.2...v2.9.0) --- updated-dependencies: - dependency-name: github.com/hetznercloud/hcloud-go/v2 dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com> * build(deps): bump github.com/Azure/azure-sdk-for-go/sdk/resourcemanager/compute/armcompute/v5 Bumps [github.com/Azure/azure-sdk-for-go/sdk/resourcemanager/compute/armcompute/v5](https://github.com/Azure/azure-sdk-for-go) from 5.6.0 to 5.7.0. - [Release notes](https://github.com/Azure/azure-sdk-for-go/releases) - [Changelog](https://github.com/Azure/azure-sdk-for-go/blob/main/documentation/release.md) - [Commits](https://github.com/Azure/azure-sdk-for-go/compare/sdk/resourcemanager/compute/armcompute/v5.6.0...sdk/resourcemanager/compute/armcompute/v5.7.0) --- updated-dependencies: - dependency-name: github.com/Azure/azure-sdk-for-go/sdk/resourcemanager/compute/armcompute/v5 dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com> * build(deps): bump actions/setup-go from 5.0.0 to 5.0.1 in /scripts Bumps [actions/setup-go](https://github.com/actions/setup-go) from 5.0.0 to 5.0.1. - [Release notes](https://github.com/actions/setup-go/releases) - [Commits](https://github.com/actions/setup-go/compare/0c52d547c9bc32b1aa3301fd7a9cb496313a4491...cdcb36043654635271a94b9a6d1392de5bb323a7) --- updated-dependencies: - dependency-name: actions/setup-go dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com> * build(deps): bump actions/setup-go from 5.0.0 to 5.0.1 Bumps [actions/setup-go](https://github.com/actions/setup-go) from 5.0.0 to 5.0.1. - [Release notes](https://github.com/actions/setup-go/releases) - [Commits](https://github.com/actions/setup-go/compare/0c52d547c9bc32b1aa3301fd7a9cb496313a4491...cdcb36043654635271a94b9a6d1392de5bb323a7) --- updated-dependencies: - dependency-name: actions/setup-go dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com> * build(deps): bump bufbuild/buf-setup-action from 1.30.0 to 1.32.2 Bumps [bufbuild/buf-setup-action](https://github.com/bufbuild/buf-setup-action) from 1.30.0 to 1.32.2. - [Release notes](https://github.com/bufbuild/buf-setup-action/releases) - [Commits](https://github.com/bufbuild/buf-setup-action/compare/517ee23296d5caf38df31c21945e6a54bbc8a89f...dde0b9351db90fbf78e345f41a57de8514bf1091) --- updated-dependencies: - dependency-name: bufbuild/buf-setup-action dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com> * tsdb/index: Fix TestReader_PostingsForLabelMatchingHonorsContextCancel Fix number of series in TestReader_PostingsForLabelMatchingHonorsContextCancel (off by one). Signed-off-by: Arve Knudsen <arve.knudsen@gmail.com> * tsdb: add details to duplicate sample error (#13277) Now the error will include the timestamp and the existing and new values. When you are trying to track down the source of this error, it can be useful to see that the values are close, or alternating, or something else. Signed-off-by: Bryan Boreham <bjboreham@gmail.com> * build(deps): bump github.com/prometheus/prometheus Bumps [github.com/prometheus/prometheus](https://github.com/prometheus/prometheus) from 0.51.2 to 0.52.1. - [Release notes](https://github.com/prometheus/prometheus/releases) - [Changelog](https://github.com/prometheus/prometheus/blob/main/CHANGELOG.md) - [Commits](https://github.com/prometheus/prometheus/compare/v0.51.2...v0.52.1) --- updated-dependencies: - dependency-name: github.com/prometheus/prometheus dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com> * CI: Use default behavior of update-container-description-action Previously, we always used README.md as the readme to push as container description. By not explicitly specifying this file name, we use the default behavior of the action, which is to push README-containers.md if it exist, and push README.md otherwise. In short, nothing will directly change with this commit, but now repositories can provide a README-containers.md if they want to push a different README as the container description. Signed-off-by: beorn7 <beorn@grafana.com> * build(deps): bump the go-opentelemetry-io group across 1 directory with 9 updates Bumps the go-opentelemetry-io group with 6 updates in the / directory: | Package | From | To | | --- | --- | --- | | [go.opentelemetry.io/collector/pdata](https://github.com/open-telemetry/opentelemetry-collector) | `1.5.0` | `1.8.0` | | [go.opentelemetry.io/collector/semconv](https://github.com/open-telemetry/opentelemetry-collector) | `0.98.0` | `0.101.0` | | [go.opentelemetry.io/contrib/instrumentation/net/http/otelhttp](https://github.com/open-telemetry/opentelemetry-go-contrib) | `0.50.0` | `0.52.0` | | [go.opentelemetry.io/otel/exporters/otlp/otlptrace](https://github.com/open-telemetry/opentelemetry-go) | `1.25.0` | `1.27.0` | | [go.opentelemetry.io/otel/exporters/otlp/otlptrace/otlptracegrpc](https://github.com/open-telemetry/opentelemetry-go) | `1.25.0` | `1.27.0` | | [go.opentelemetry.io/otel/exporters/otlp/otlptrace/otlptracehttp](https://github.com/open-telemetry/opentelemetry-go) | `1.25.0` | `1.27.0` | Updates `go.opentelemetry.io/collector/pdata` from 1.5.0 to 1.8.0 - [Release notes](https://github.com/open-telemetry/opentelemetry-collector/releases) - [Changelog](https://github.com/open-telemetry/opentelemetry-collector/blob/main/CHANGELOG-API.md) - [Commits](https://github.com/open-telemetry/opentelemetry-collector/compare/pdata/v1.5.0...pdata/v1.8.0) Updates `go.opentelemetry.io/collector/semconv` from 0.98.0 to 0.101.0 - [Release notes](https://github.com/open-telemetry/opentelemetry-collector/releases) - [Changelog](https://github.com/open-telemetry/opentelemetry-collector/blob/main/CHANGELOG-API.md) - [Commits](https://github.com/open-telemetry/opentelemetry-collector/compare/v0.98.0...v0.101.0) Updates `go.opentelemetry.io/contrib/instrumentation/net/http/otelhttp` from 0.50.0 to 0.52.0 - [Release notes](https://github.com/open-telemetry/opentelemetry-go-contrib/releases) - [Changelog](https://github.com/open-telemetry/opentelemetry-go-contrib/blob/main/CHANGELOG.md) - [Commits](https://github.com/open-telemetry/opentelemetry-go-contrib/compare/zpages/v0.50.0...zpages/v0.52.0) Updates `go.opentelemetry.io/otel` from 1.25.0 to 1.27.0 - [Release notes](https://github.com/open-telemetry/opentelemetry-go/releases) - [Changelog](https://github.com/open-telemetry/opentelemetry-go/blob/main/CHANGELOG.md) - [Commits](https://github.com/open-telemetry/opentelemetry-go/compare/v1.25.0...v1.27.0) Updates `go.opentelemetry.io/otel/exporters/otlp/otlptrace` from 1.25.0 to 1.27.0 - [Release notes](https://github.com/open-telemetry/opentelemetry-go/releases) - [Changelog](https://github.com/open-telemetry/opentelemetry-go/blob/main/CHANGELOG.md) - [Commits](https://github.com/open-telemetry/opentelemetry-go/compare/v1.25.0...v1.27.0) Updates `go.opentelemetry.io/otel/exporters/otlp/otlptrace/otlptracegrpc` from 1.25.0 to 1.27.0 - [Release notes](https://github.com/open-telemetry/opentelemetry-go/releases) - [Changelog](https://github.com/open-telemetry/opentelemetry-go/blob/main/CHANGELOG.md) - [Commits](https://github.com/open-telemetry/opentelemetry-go/compare/v1.25.0...v1.27.0) Updates `go.opentelemetry.io/otel/exporters/otlp/otlptrace/otlptracehttp` from 1.25.0 to 1.27.0 - [Release notes](https://github.com/open-telemetry/opentelemetry-go/releases) - [Changelog](https://github.com/open-telemetry/opentelemetry-go/blob/main/CHANGELOG.md) - [Commits](https://github.com/open-telemetry/opentelemetry-go/compare/v1.25.0...v1.27.0) Updates `go.opentelemetry.io/otel/sdk` from 1.25.0 to 1.27.0 - [Release notes](https://github.com/open-telemetry/opentelemetry-go/releases) - [Changelog](https://github.com/open-telemetry/opentelemetry-go/blob/main/CHANGELOG.md) - [Commits](https://github.com/open-telemetry/opentelemetry-go/compare/v1.25.0...v1.27.0) Updates `go.opentelemetry.io/otel/trace` from 1.25.0 to 1.27.0 - [Release notes](https://github.com/open-telemetry/opentelemetry-go/releases) - [Changelog](https://github.com/open-telemetry/opentelemetry-go/blob/main/CHANGELOG.md) - [Commits](https://github.com/open-telemetry/opentelemetry-go/compare/v1.25.0...v1.27.0) --- updated-dependencies: - dependency-name: go.opentelemetry.io/collector/pdata dependency-type: direct:production update-type: version-update:semver-minor dependency-group: go-opentelemetry-io - dependency-name: go.opentelemetry.io/collector/semconv dependency-type: direct:production update-type: version-update:semver-minor dependency-group: go-opentelemetry-io - dependency-name: go.opentelemetry.io/contrib/instrumentation/net/http/otelhttp dependency-type: direct:production update-type: version-update:semver-minor dependency-group: go-opentelemetry-io - dependency-name: go.opentelemetry.io/otel dependency-type: direct:production update-type: version-update:semver-minor dependency-group: go-opentelemetry-io - dependency-name: go.opentelemetry.io/otel/exporters/otlp/otlptrace dependency-type: direct:production update-type: version-update:semver-minor dependency-group: go-opentelemetry-io - dependency-name: go.opentelemetry.io/otel/exporters/otlp/otlptrace/otlptracegrpc dependency-type: direct:production update-type: version-update:semver-minor dependency-group: go-opentelemetry-io - dependency-name: go.opentelemetry.io/otel/exporters/otlp/otlptrace/otlptracehttp dependency-type: direct:production update-type: version-update:semver-minor dependency-group: go-opentelemetry-io - dependency-name: go.opentelemetry.io/otel/sdk dependency-type: direct:production update-type: version-update:semver-minor dependency-group: go-opentelemetry-io - dependency-name: go.opentelemetry.io/otel/trace dependency-type: direct:production update-type: version-update:semver-minor dependency-group: go-opentelemetry-io ... Signed-off-by: dependabot[bot] <support@github.com> Signed-off-by: Arve Knudsen <arve.knudsen@gmail.com> * build(deps): bump github/codeql-action from 3.22.12 to 3.25.7 Bumps [github/codeql-action](https://github.com/github/codeql-action) from 3.22.12 to 3.25.7. - [Release notes](https://github.com/github/codeql-action/releases) - [Changelog](https://github.com/github/codeql-action/blob/main/CHANGELOG.md) - [Commits](https://github.com/github/codeql-action/compare/012739e5082ff0c22ca6d6ab32e07c36df03c4a4...f079b8493333aace61c81488f8bd40919487bd9f) --- updated-dependencies: - dependency-name: github/codeql-action dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com> * build(deps): bump github.com/docker/docker Bumps [github.com/docker/docker](https://github.com/docker/docker) from 26.0.1+incompatible to 26.1.3+incompatible. - [Release notes](https://github.com/docker/docker/releases) - [Commits](https://github.com/docker/docker/compare/v26.0.1...v26.1.3) --- updated-dependencies: - dependency-name: github.com/docker/docker dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com> * Update Go dependencies for 2.53 Ran "make update-all-go-deps" , but do not bump go version and remove toolchain clause from go.mod Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com> * tsdb: Allow passing a custom compactor to override the default one (#14113) * expose hook in tsdb to allow customizing compactor Signed-off-by: Ben Ye <benye@amazon.com> * address comment Signed-off-by: Ben Ye <benye@amazon.com> --------- Signed-off-by: Ben Ye <benye@amazon.com> * Revert update of opentelemetry collector components These bring in a hard dependecy on toolchain we don't want via https://github.com/open-telemetry/opentelemetry-collector/pull/10165 The dependency should be going away https://github.com/open-telemetry/opentelemetry-collector/pull/10165#pullrequestreview-2060814562 Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com> * Revert change to scaleway-sdk-go The change brings in non trivial deprecations. Multiple public IPs can be returned by the API now instead of one. Need to decide what to do in that case as we used a single meta label for that __meta_scaleway_instance_public_ipv4. Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com> * Add configuration option for GOGC Add the ability to adjust the `GOGC` variable from the Prometheus configuration file. * Create a new top-level `runtime` section in the config. * Adjust from the Go default of 100 to 50 to reduce wasted memory. * Use the `GOGC` env value if no configuraiton is used. Signed-off-by: SuperQ <superq@gmail.com> * Increase the depndabot open PR limit The default limit of 5 is a bit small given the number of dependencies we have for Go and JS. Increase to 20 to allow more updates to be pushed. Signed-off-by: SuperQ <superq@gmail.com> * Update scaleway-sdk-go and silence deprecation warnings This reverts commit 777daea86e0ee2cee1e00f3cd75293bde9aa7f51. * Format linter pragma correctly Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com> * build(deps): bump golang.org/x/net from 0.25.0 to 0.26.0 Bumps [golang.org/x/net](https://github.com/golang/net) from 0.25.0 to 0.26.0. - [Commits](https://github.com/golang/net/compare/v0.25.0...v0.26.0) --- updated-dependencies: - dependency-name: golang.org/x/net dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com> * build(deps): bump github.com/digitalocean/godo from 1.116.0 to 1.117.0 Bumps [github.com/digitalocean/godo](https://github.com/digitalocean/godo) from 1.116.0 to 1.117.0. - [Release notes](https://github.com/digitalocean/godo/releases) - [Changelog](https://github.com/digitalocean/godo/blob/main/CHANGELOG.md) - [Commits](https://github.com/digitalocean/godo/compare/v1.116.0...v1.117.0) --- updated-dependencies: - dependency-name: github.com/digitalocean/godo dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com> * build(deps): bump github.com/aws/aws-sdk-go from 1.53.15 to 1.53.16 Bumps [github.com/aws/aws-sdk-go](https://github.com/aws/aws-sdk-go) from 1.53.15 to 1.53.16. - [Release notes](https://github.com/aws/aws-sdk-go/releases) - [Commits](https://github.com/aws/aws-sdk-go/compare/v1.53.15...v1.53.16) --- updated-dependencies: - dependency-name: github.com/aws/aws-sdk-go dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com> * RuleQueryOffset: Add omitempty for the global configuration (#14216) A small oversight of when I introduced https://github.com/prometheus/prometheus/pull/14061, I could add a test to cover it but it seems like an overkill given other similar attributes don't have it either. Let me know if you think it's worth it. Signed-off-by: gotjosh <josue.abreu@gmail.com> * build(deps): bump golang.org/x/tools from 0.21.0 to 0.22.0 Bumps [golang.org/x/tools](https://github.com/golang/tools) from 0.21.0 to 0.22.0. - [Release notes](https://github.com/golang/tools/releases) - [Commits](https://github.com/golang/tools/compare/v0.21.0...v0.22.0) --- updated-dependencies: - dependency-name: golang.org/x/tools dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com> * CI: Actually enable the default fallback behavior of docker-pushrm The Github action explicitly sets `README.md` as the default file to push, see https://github.com/christian-korneck/update-container-description-action/blob/master/action.yml#L17 This disables the fallback to `README-containers.md`, as implemented in the actual tool that the Github action uses, i.e. https://github.com/christian-korneck/docker-pushrm However, by setting the file name explicitly to an empty string, we can trigger the default fallback behavior of dockre-pushrm after all. Signed-off-by: beorn7 <beorn@grafana.com> * build(deps): bump google.golang.org/api from 0.182.0 to 0.183.0 Bumps [google.golang.org/api](https://github.com/googleapis/google-api-go-client) from 0.182.0 to 0.183.0. - [Release notes](https://github.com/googleapis/google-api-go-client/releases) - [Changelog](https://github.com/googleapis/google-api-go-client/blob/main/CHANGES.md) - [Commits](https://github.com/googleapis/google-api-go-client/compare/v0.182.0...v0.183.0) --- updated-dependencies: - dependency-name: google.golang.org/api dependency-type: direct:production update-type: version-update:semver-minor ... Signed-off-by: dependabot[bot] <support@github.com> * Version bump to v2.53.0-rc.0 Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com> * Ammend changelog with missing user impact entries Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com> * Clarify action to take with regards to the changelog Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com> * Fix typo in changelog Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com> * Update changelog from review comments Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com> * Fix Group.Equals() to take in account the new queryOffset too (#14273) Signed-off-by: Marco Pracucci <marco@pracucci.com> * Update changelog due to pr 14273 Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com> * Tune default GOGC Adjust the default GOGC value to 75. This is less of a memory savings, but has less impact on CPU use. Signed-off-by: SuperQ <superq@gmail.com> * Update changelog for GOGC tuning Include #14285 in changelog. Signed-off-by: SuperQ <superq@gmail.com> * Revert "Update changelog due to pr 14273" This reverts commit dd4400146521c996239da57d2a225a608e3915cb. Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com> * Prepare 2.53.0-rc.1 release Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com> * Prepare release 2.53.0 Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com> * Update CHANGELOG.md Co-authored-by: Julien <291750+roidelapluie@users.noreply.github.com> Signed-off-by: George Krajcsovits <krajorama@users.noreply.github.com> * [release 2.53] Revert 13583 to stop dropping samples in remote-write catch-up (#14446) * Revert "fix bug that would cause us to endlessly fall behind (#13583)" This reverts commit 0c71230784368da829f1f02d412d181d7a06aee6. (leaving the new test in place) * TSDB: enhance TestRun_AvoidNotifyWhenBehind With code suggested by @cstyan in #14439. * WAL watcher: add back log line showing current segment --------- Signed-off-by: Bryan Boreham <bjboreham@gmail.com> * Prepare release 2.53.1 (#14452) Co-authored-by: George Krajcsovits <krajorama@users.noreply.github.com> Signed-off-by: Bryan Boreham <bjboreham@gmail.com> * [bot] assets: generate Signed-off-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com> * [create-pull-request] automated change Signed-off-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com> --------- Signed-off-by: Mickael Carl <mcarl@apple.com> Signed-off-by: tyltr <tylitianrui@126.com> Signed-off-by: roger.wang <roger.wang@cloudwise.com> Signed-off-by: Federico Leva <federico.leva@relexsolutions.com> Signed-off-by: machine424 <ayoubmrini424@gmail.com> Signed-off-by: komisan19 <18901496+komisan19@users.noreply.github.com> Signed-off-by: gotjosh <josue.abreu@gmail.com> Signed-off-by: tesla59 <nishant@heim.id> Signed-off-by: alanprot <alanprot@gmail.com> Signed-off-by: Arthur Silva Sens <arthur.sens@coralogix.com> Signed-off-by: George Robinson <george.robinson@grafana.com> Signed-off-by: Stephen Heckler <sheckler@cloudflare.com> Signed-off-by: Nishant Singh <nishant@heim.id> Signed-off-by: Heyoxe <32708033+Heyoxe@users.noreply.github.com> Signed-off-by: Neeraj Gartia <neerajgartia211002@gmail.com> Signed-off-by: guoguangwu <guoguangwug@gmail.com> Signed-off-by: Jesus Vazquez <jesusvzpg@gmail.com> Signed-off-by: Jiekun <zhujiekun@52tt.com> Signed-off-by: Arve Knudsen <arve.knudsen@gmail.com> Signed-off-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com> Signed-off-by: SuperQ <superq@gmail.com> Signed-off-by: dependabot[bot] <support@github.com> Signed-off-by: kushagra Shukla <kushalshukla110@gmail.com> Signed-off-by: Kushal shukla <85934954+kushalShukla-web@users.noreply.github.com> Signed-off-by: Oleg Zaytsev <mail@olegzaytsev.com> Signed-off-by: Pranshu Srivastava <rexagod@gmail.com> Signed-off-by: Bryan Boreham <bjboreham@gmail.com> Signed-off-by: Anthony J Mirabella <a9@aneurysm9.com> Signed-off-by: Charles Korn <charles.korn@grafana.com> Signed-off-by: Oleksandr Redko <oleksandr.red+github@gmail.com> Signed-off-by: beorn7 <beorn@grafana.com> Signed-off-by: Jayapriya Pai <janantha@redhat.com> Signed-off-by: Mohamed Awnallah <mohamedmohey2352@gmail.com> Signed-off-by: Julien <291750+roidelapluie@users.noreply.github.com> Signed-off-by: Alan Protasio <alanprot@gmail.com> Signed-off-by: Simon Pasquier <spasquie@redhat.com> Signed-off-by: David Andruczyk <dandrucz@akamai.com> Signed-off-by: Matthieu MOREL <matthieu.morel35@gmail.com> Signed-off-by: Arthur Silva Sens <arthursens2005@gmail.com> Signed-off-by: Ben Ye <benye@amazon.com> Signed-off-by: Ganesh Vernekar <ganeshvern@gmail.com> Signed-off-by: Ben Kochie <superq@gmail.com> Signed-off-by: Marco Pracucci <marco@pracucci.com> Signed-off-by: George Krajcsovits <krajorama@users.noreply.github.com> Signed-off-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com> Co-authored-by: Mickael Carl <mcarl@apple.com> Co-authored-by: tyltr <tylitianrui@126.com> Co-authored-by: roger.wang <roger.wang@cloudwise.com> Co-authored-by: Federico Leva <federico.leva@relexsolutions.com> Co-authored-by: Bartlomiej Plotka <bwplotka@gmail.com> Co-authored-by: machine424 <ayoubmrini424@gmail.com> Co-authored-by: komisan19 <18901496+komisan19@users.noreply.github.com> Co-authored-by: gotjosh <josue.abreu@gmail.com> Co-authored-by: tesla59 <nishant@heim.id> Co-authored-by: Alan Protasio <alanprot@gmail.com> Co-authored-by: Arthur Silva Sens <arthur.sens@coralogix.com> Co-authored-by: George Robinson <george.robinson@grafana.com> Co-authored-by: Arthur Silva Sens <arthursens2005@gmail.com> Co-authored-by: Stephen Heckler <sheckler@cloudflare.com> Co-authored-by: Heyoxe <32708033+Heyoxe@users.noreply.github.com> Co-authored-by: Neeraj Gartia <80708727+NeerajGartia21@users.noreply.github.com> Co-authored-by: Julien <291750+roidelapluie@users.noreply.github.com> Co-authored-by: guangwu <guoguangwug@gmail.com> Co-authored-by: Jesus Vazquez <jesusvazquez@users.noreply.github.com> Co-authored-by: Arve Knudsen <arve.knudsen@gmail.com> Co-authored-by: Jiekun <zhujiekun@52tt.com> Co-authored-by: György Krajcsovits <gyorgy.krajcsovits@grafana.com> Co-authored-by: George Krajcsovits <krajorama@users.noreply.github.com> Co-authored-by: SuperQ <superq@gmail.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Augustin Husson <husson.augustin@gmail.com> Co-authored-by: Kushal shukla <85934954+kushalShukla-web@users.noreply.github.com> Co-authored-by: Oleg Zaytsev <mail@olegzaytsev.com> Co-authored-by: Pranshu Srivastava <rexagod@gmail.com> Co-authored-by: Bryan Boreham <bjboreham@gmail.com> Co-authored-by: Björn Rabenstein <beorn@grafana.com> Co-authored-by: Björn Rabenstein <github@rabenste.in> Co-authored-by: Anthony Mirabella <a9@aneurysm9.com> Co-authored-by: Charles Korn <charles.korn@grafana.com> Co-authored-by: Neeraj Gartia <neerajgartia211002@gmail.com> Co-authored-by: Oleksandr Redko <oleksandr.red+github@gmail.com> Co-authored-by: Matthias Loibl <mail@matthiasloibl.com> Co-authored-by: kushagra Shukla <kushalshukla110@gmail.com> Co-authored-by: Jayapriya Pai <janantha@redhat.com> Co-authored-by: Mohamed Awnallah <mohamedmohey2352@gmail.com> Co-authored-by: Ganesh Vernekar <ganeshvern@gmail.com> Co-authored-by: Simon Pasquier <spasquie@redhat.com> Co-authored-by: David Andruczyk <dandrucz@akamai.com> Co-authored-by: Matthieu MOREL <matthieu.morel35@gmail.com> Co-authored-by: Ben Ye <benye@amazon.com> Co-authored-by: Julius Volz <julius.volz@gmail.com> Co-authored-by: Marco Pracucci <marco@pracucci.com> Co-authored-by: github-actions[bot] <github-actions[bot]@users.noreply.github.com>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
CodeQL is currently reporting "Invalid Go toolchain version: As of Go 1.21, toolchain versions must use the 1.N.P syntax.". This PR attempts to fix this.