sync hltemo asserts

* taken from https://github.com/LineageOS/android_device_samsung_hltetmo/blob/0bd9fb6ddcc6f2ccadff01e495315218d6b5ddc4/BoardConfig.mk#L19

Signed-off-by: SirRGB <sirrgb@proton.me>

openandroidinstaller/assets/configs/FP2.yaml

@@ -10,13 +10,13 @@ steps:
   boot_recovery:
     - type: call_button
       content: >
-        Now you need to boot a custom recovery system on the phone. A recovery is a small subsystem on your phone, that manages updating, 
+        Now you need to boot a custom recovery system on the phone. A recovery is a small subsystem on your phone, that manages updating,
         adapting and repairing of the operating system.
-        
+
         Make sure your device is turned on and connected to the computer. Boot into the bootloader by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
       img: twrp-start.jpeg
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
-      command: fastboot_boot_recovery
+      command: fastboot_boot_recovery

openandroidinstaller/assets/configs/FP3.yaml

@@ -45,7 +45,7 @@ steps:
       content: >
         The bootloader is now unlocked. Since the device resets completely, you will need to re-enable USB debugging to continue.
   boot_recovery:
-    - type: confirm_button 
+    - type: confirm_button
       content: >
         Now you need to boot a custom recovery system on the phone. A recovery is a small subsystem on your phone, that manages updating, 
         adapting and repairing of the operating system.
@@ -57,4 +57,4 @@ steps:
       img: twrp-start.jpeg
       content: >
         Once the device is in fastboot mode, flash the custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
-      command: fastboot_boot_recovery
+      command: fastboot_boot_recovery

openandroidinstaller/assets/configs/FP4.yaml

@@ -45,7 +45,7 @@ steps:
       content: >
         The bootloader is now unlocked. Since the device resets completely, you will need to re-enable USB debugging to continue.
   boot_recovery:
-    - type: confirm_button 
+    - type: confirm_button
       content: >
         Now you need to boot a custom recovery system on the phone. A recovery is a small subsystem on your phone, that manages updating, 
         adapting and repairing of the operating system.
@@ -57,4 +57,4 @@ steps:
       img: twrp-start.jpeg
       content: >
         Once the device is in fastboot mode, boot the custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
-      command: fastboot_boot_recovery
+      command: fastboot_boot_recovery

openandroidinstaller/assets/configs/enchilada.yaml

@@ -2,7 +2,7 @@ metadata:
   maintainer: Tobias Sterbak (tsterbak)
   device_name: OnePlus 6
   is_ab_device: true
-  device_code: enchilada 
+  device_code: enchilada
   supported_device_codes:
     - enchilada
     - OnePlus6
@@ -22,7 +22,7 @@ steps:
         Once it's done, press continue here.
       command: fastboot_oem_unlock
     - type: confirm_button
-      content: > 
+      content: >
         The bootloader is now unlocked. Since the device resets completely, you will need to re-enable Developer Options and USB debugging to continue.
   boot_recovery:
     - type: call_button
@@ -45,4 +45,4 @@ steps:
       img: twrp-start.jpeg
       content: >
         Now we need to boot into recovery again. Press run and when you see the TWRP screen you can continue.
-      command: fastboot_boot_recovery
+      command: fastboot_boot_recovery

openandroidinstaller/assets/configs/evert.yaml

@@ -2,18 +2,18 @@ metadata:
   maintainer: Tobias Sterbak (tsterbak)
   device_name: Motorola moto g6 plus
   is_ab_device: true
-  device_code: evert 
+  device_code: evert
   supported_device_codes:
     - evert
     - evert_n
 steps:
   unlock_bootloader:
-    - type: call_button 
+    - type: call_button
       command: adb_reboot_bootloader
       content: >
         As a first step, you need to unlock the bootloader of your device. A bootloader is the piece of software, that tells your phone
         how to start and run an operating system (like Android). You need to boot into fastboot mode by pressing the 'Confirm and run' button. Then continue.
-    - type: call_button 
+    - type: call_button
       command: fastboot_get_unlock_data
       content: >
         Now you need to get your device ID to get an unlock code from Motorola. Press 'Confirm and run' to get the ID. (You need to toggle 'Advanced Output' here to see it.)
@@ -36,7 +36,7 @@ steps:
       command: fastboot_unlock_with_code
     - type: call_button
       content: >
-        Press the button to reboot. Since the device resets completely, you will need to re-enable USB debugging to continue. 
+        Press the button to reboot. Since the device resets completely, you will need to re-enable USB debugging to continue.
         Connect your device to your PC via USB. Then confirm here to continue.
       command: fastboot_reboot
   boot_recovery:

openandroidinstaller/assets/configs/flame.yaml

@@ -2,9 +2,9 @@ metadata:
   maintainer: Tobias Sterbak (tsterbak)
   device_name: Pixel 4
   is_ab_device: true
-  device_code: flame 
+  device_code: flame
   supported_device_codes:
-    - flame 
+    - flame
   additional_steps:
     - dtbo
 requirements:
@@ -39,7 +39,7 @@ steps:
       content: >
         The bootloader is now unlocked. Since the device resets completely, you will need to re-enable USB debugging to continue.
   boot_recovery:
-    - type: confirm_button 
+    - type: confirm_button
       content: >
         Now you need to boot a custom recovery system on the phone. A recovery is a small subsystem on your phone, that manages updating,
         adapting and repairing of the operating system.
@@ -54,4 +54,4 @@ steps:
       img: twrp-start.jpeg
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
-      command: fastboot_boot_recovery
+      command: fastboot_boot_recovery

openandroidinstaller/assets/configs/grandprimevelte.yaml

@@ -13,8 +13,8 @@ steps:
   boot_recovery:
     - type: call_button
       content: >
-        As a first step, you need to boot into the bootloader. A bootloader is the piece of software, 
-        that tells your phone how to start and run an operating system (like Android). Your device should be turned on. 
+        As a first step, you need to boot into the bootloader. A bootloader is the piece of software,
+        that tells your phone how to start and run an operating system (like Android). Your device should be turned on.
         Then press 'Confirm and run' to reboot into the bootloader. Continue once it's done.
       command: adb_reboot_download
     - type: call_button
@@ -25,6 +25,6 @@ steps:
     - type: confirm_button
       img: samsung-buttons.png
       content: >
-        Unplug the USB cable from your device. Then manually reboot into recovery by pressing the *Volume Down* + *Power buttons* for 8~10 seconds 
-        until the screen turns black & release the buttons immediately when it does, then boot to recovery with the device powered off, 
-        hold *Volume Up* + *Home* + *Power button*.
+        Unplug the USB cable from your device. Then manually reboot into recovery by pressing the *Volume Down* + *Power buttons* for 8~10 seconds
+        until the screen turns black & release the buttons immediately when it does, then boot to recovery with the device powered off,
+        hold *Volume Up* + *Home* + *Power button*.

openandroidinstaller/assets/configs/greatlte.yaml

@@ -2,16 +2,16 @@ metadata:
   maintainer: Michel Memeteau (freechelmi)
   device_name: Samsung Galaxy note 8
   is_ab_device: false
-  device_code: greatlte 
+  device_code: greatlte
   supported_device_codes:
-    - greatlte 
+    - greatlte
 steps:
   unlock_bootloader:
   boot_recovery:
     - type: call_button
       content: >
-        As a first step, you need to boot into the bootloader. A bootloader is the piece of software, 
-        that tells your phone how to start and run an operating system (like Android). Your device should be turned on. 
+        As a first step, you need to boot into the bootloader. A bootloader is the piece of software,
+        that tells your phone how to start and run an operating system (like Android). Your device should be turned on.
         Then press 'Confirm and run' to reboot into the bootloader. Continue once it's done.
       command: adb_reboot_download
     - type: call_button
@@ -22,5 +22,5 @@ steps:
     - type: confirm_button
       img: samsung-buttons-bixby.png
       content: >
-        Unplug the USB cable from your device. Then manually reboot into recovery by pressing the *Volume Down* + *Power buttons* for 8~10 seconds 
-        until the screen turns black to reboot  & release the buttons immediately when it does, then immediately hold *Volume Up* + *Bixby* + *Power button* until you are in recovery mode.
+        Unplug the USB cable from your device. Then manually reboot into recovery by pressing the *Volume Down* + *Power buttons* for 8~10 seconds
+        until the screen turns black to reboot  & release the buttons immediately when it does, then immediately hold *Volume Up* + *Bixby* + *Power button* until you are in recovery mode.

openandroidinstaller/assets/configs/gts210vewifi.yaml

@@ -1,7 +1,7 @@
 metadata:
   maintainer: Michel Memeteau (freechelmi)
-  device_name: Samsung Galaxy Tab S2 (T813 2016) 
-  is_ab_device: false 
+  device_name: Samsung Galaxy Tab S2 (T813 2016)
+  is_ab_device: false
   device_code: gts210vewifi
   supported_device_codes:
     - gts210vewifi
@@ -10,8 +10,8 @@ steps:
   boot_recovery:
     - type: call_button
       content: >
-        As a first step, you need to boot into the bootloader. A bootloader is the piece of software, 
-        that tells your phone how to start and run an operating system (like Android). Your device should be turned on. 
+        As a first step, you need to boot into the bootloader. A bootloader is the piece of software,
+        that tells your phone how to start and run an operating system (like Android). Your device should be turned on.
         Then press 'Confirm and run' to reboot into the bootloader. Continue once it's done.
       command: adb_reboot_download
     - type: call_button
@@ -22,6 +22,6 @@ steps:
     - type: confirm_button
       img: samsung-buttons.png
       content: >
-        Unplug the USB cable from your device. Then manually reboot into recovery by pressing the *Volume Down* + *Power buttons* for 8~10 seconds 
-        until the screen turns black & release the buttons immediately when it does, then boot to recovery with the device powered off, 
-        hold *Volume Up* + *Home* + *Power button*.
+        Unplug the USB cable from your device. Then manually reboot into recovery by pressing the *Volume Down* + *Power buttons* for 8~10 seconds
+        until the screen turns black & release the buttons immediately when it does, then boot to recovery with the device powered off,
+        hold *Volume Up* + *Home* + *Power button*.

openandroidinstaller/assets/configs/guacamoleb.yaml

@@ -5,7 +5,7 @@ metadata:
   device_code: guacamoleb
   supported_device_codes:
     - guacamoleb
-    - OnePlus7  
+    - OnePlus7
   additional_steps:
     - dtbo
     - vbmeta
@@ -39,3 +39,4 @@ steps:
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
+

openandroidinstaller/assets/configs/hltetmo.yaml

@@ -2,9 +2,13 @@ metadata:
   maintainer: Tobias Sterbak (tsterbak)
   device_name: Samsung Galaxy Note 3 LTE (N900T/V/W8)
   is_ab_device: false
-  device_code: hltetmo 
+  device_code: hltetmo
   supported_device_codes:
-    - hltetmo 
+    - hltetmo
+    - hlte
+    - hltecan
+    - hlteusc
+    - hltevzw
 steps:
   unlock_bootloader:
   boot_recovery:
@@ -22,6 +26,6 @@ steps:
     - type: confirm_button
       img: samsung-buttons.png
       content: >
-        Unplug the USB cable from your device. Then manually reboot into recovery by pressing the *Volume Down* + *Power buttons* for 
-        8~10 seconds until the screen turns black & release the buttons immediately when it does, then boot to recovery with the device powered off, 
-        hold *Volume Up* + *Home* + *Power*. Confirm when the recovery screen appears.
+        Unplug the USB cable from your device. Then manually reboot into recovery by pressing the *Volume Down* + *Power buttons* for
+        8~10 seconds until the screen turns black & release the buttons immediately when it does, then boot to recovery with the device powered off,
+        hold *Volume Up* + *Home* + *Power*. Confirm when the recovery screen appears.