chore(import-vol): adding steps to import existing volumes to ZFS-Loc…

…alPV

Signed-off-by: Pawan <pawan@mayadata.io>

docs/import-existing-volume.md

@@ -0,0 +1,257 @@
+## Import Existing Volumes to ZFS-LocalPV
+
+
+### Introduction
+
+There can be cases where node can not be recovered from the failure condition, in that case application can not come into running state as k8s will try to schedule it to the same node as the data is there on that node only. Also, there can be cases where people want to attach the existing volume to the ZFS-LocalPV driver. 
+
+In case of node failure, we can move the disks to the other node and import the pool there. All the volumes and their data will be intact as disks are still in good shape. Now we can just attach those volumes to the ZFS-LocalPV driver and everything will work seamlessly.
+
+Here, I will walk through the steps to attach the existing volumes to the ZFS-LocalPV CSI driver.
+
+### Prerequisites
+
+- We should have ZFS-LocalPV Driver(version 0.6 or later) installed.
+- volumes ready to be imported
+
+### Setup
+
+#### Storageclass
+
+Setup a storageclaass which will be used for importing the volumes to ZFS-LocalPV
+
+```
+$ cat sc.yaml
+apiVersion: storage.k8s.io/v1
+kind: StorageClass
+metadata:
+  name: openebs-zfspv
+allowVolumeExpansion: true
+parameters:
+  poolname: "zfspv-pool"
+  fstype: "zfs"
+provisioner: zfs.csi.openebs.io
+
+$ kubectl apply -f sc.yaml
+storageclass.storage.k8s.io/openebs-zfspv configured
+```
+
+Make sure ZFS-LocalPV components are install and in running state before proceeding further
+
+```
+$ kubectl get pods -n kube-system -l role=openebs-zfs
+NAME                       READY   STATUS    RESTARTS   AGE
+openebs-zfs-controller-0   5/5     Running   0          5m50s
+openebs-zfs-node-b42ft     2/2     Running   0          5m50s
+openebs-zfs-node-txd59     2/2     Running   0          5m50s
+k8s@pawan-1:~/PV$
+
+```
+
+### Import Steps
+
+
+#### Step 1 : Create The Persistence Volume
+
+Get the node name and ZPOOL name where volume is present
+
+```sh
+$ zfs list
+NAME                 USED  AVAIL  REFER  MOUNTPOINT
+zfspv-pool          11.6M   246G    20K  /zfspv-pool
+zfspv-pool/fio-vol    24K  4.00G    24K  /zfspv-pool/fio-vol
+```
+
+Here in the above ZPOOL, a dataset of name "fio-vol" is present and we want to import that to the ZFS-LocalPV CSI driver. First we have to set the mountpoint to "none" so that it can be mounted by ZFS-LocalPV driver
+
+```
+$ zfs set mountpoint=none zfspv-pool/fio-vol
+
+$ zfs list -t all
+NAME                 USED  AVAIL  REFER  MOUNTPOINT
+zfspv-pool          11.6M   246G    19K  /zfspv-pool
+zfspv-pool/fio-vol    24K   246G    24K  none
+```
+
+Get the volume size :
+
+For ZFS dataset we can get the volume size as below :-
+
+```
+$ sudo zfs get quota zfspv-pool/fio-vol
+NAME                PROPERTY  VALUE  SOURCE
+zfspv-pool/fio-vol  quota     4G     local
+```
+
+For ZVOL we can get the volume size as below :-
+
+```
+$ sudo zfs get volsize zfspv-pool/fio-vol
+NAME                PROPERTY  VALUE    SOURCE
+zfspv-pool/fio-vol  volsize   4G       local
+```
+
+Here the volume size is 4Gi, we will use this size for PV and PVC.
+
+
+If volume is a ZFS dataset then create the PV with the fstype as "zfs" :
+
+```
+$ cat pv.yaml
+apiVersion: v1
+kind: PersistentVolume
+metadata:
+  name: fio-vol-pv # some unique name
+spec:
+  accessModes:
+  - ReadWriteOnce
+  capacity:
+    storage: 4Gi # size of the volume
+  claimRef:
+    apiVersion: v1
+    kind: PersistentVolumeClaim
+    name: fio-vol-pvc # name of pvc which can claim this PV
+    namespace: default # namespace for the pvc
+  csi:
+    driver: zfs.csi.openebs.io
+    fsType: zfs
+    volumeAttributes:
+      openebs.io/poolname: zfspv-pool # change the pool name accordingly
+    volumeHandle: fio-vol # This should be same as the zfs volume name
+  nodeAffinity:
+    required:
+      nodeSelectorTerms:
+      - matchExpressions:
+        - key: kubernetes.io/hostname
+          operator: In
+          values:
+          - pawan-3 # change the hostname where volume is present
+  persistentVolumeReclaimPolicy: Delete
+  storageClassName: openebs-zfspv
+  volumeMode: Filesystem
+
+$ kubectl apply -f pv.yaml
+persistentvolume/fio-vol-pv created
+```
+
+If volume is a ZVOL, then zvol may be formatted with a filesystem, use the same fstype with which zvol was formatted to create the PV. Please note that in claimRef we have mentioned name of the pvc as "fio-vol-pvc", this means that this PV can be claimed by a pvc of name fio-vol-pvc only. We have to make sure pvc claim of the name "fio-vol-pvc" matches with all the details mentioed in the PV like capacity, if it does not match then it will create a new PV for that claim and applicaiton will get a new volume not the desired volume.
+
+Verify the PV has been created with status as "Available"
+
+```
+$ kubectl get pv
+NAME         CAPACITY   ACCESS MODES   RECLAIM POLICY   STATUS      CLAIM                 STORAGECLASS    REASON   AGE
+fio-vol-pv   4Gi        RWO            Retain           Available   default/fio-vol-pvc   openebs-zfspv            1s
+```
+
+#### Step 2 : Attach The Volume With ZFS-LocalPV
+
+If the volume is a zfs dataset, then create ZFS-LocalPV resource with volumeType as "DATASET", otherwise it should be "ZVOL".
+
+```
+$ cat zfspvcr.yaml
+apiVersion: zfs.openebs.io/v1alpha1
+kind: ZFSVolume
+metadata:
+  finalizers:
+  - zfs.openebs.io/finalizer
+  name: fio-vol  # should be same as zfs volume name
+  namespace: openebs
+spec:
+  capacity: "4G" # size of the volume
+  fsType: zfs
+  ownerNodeID: pawan-3 # should be the nodename where ZPOOL is running
+  poolName: zfspv-pool # poolname where the volume is present
+  volumeType: DATASET # whether it is a DATASET or ZVOL
+```
+
+Modify the parameters :-
+- capacity to the size of the zfs dataset
+- fstype, the fstype of the volume (zfs, ext4, xfs etc)
+- ownerNodeID which is node where the pool is present.
+- volumeType should be DATASET if fstype is "zfs" otherwise it should be "ZVOL"
+
+Now volume has been imported to ZFS-LocalPV CSI driver.
+
+### Deploy Application
+
+#### Create PVC
+
+Create the persistence volume claim with the same name as the name given in the PV's claimRef section and in the same namespace
+
+```
+$ cat pvc.yaml
+kind: PersistentVolumeClaim
+apiVersion: v1
+metadata:
+  name: fio-vol-pvc
+spec:
+  storageClassName: openebs-zfspv
+  accessModes:
+    - ReadWriteOnce
+  resources:
+    requests:
+      storage: 4Gi
+
+$ kubectl apply -f pvc.yaml
+persistentvolumeclaim/fio-vol-pvc created
+```
+
+We can see the this claim has been bound to the PV that we have created
+
+```
+$ kubectl get pvc
+NAME          STATUS   VOLUME       CAPACITY   ACCESS MODES   STORAGECLASS    AGE
+fio-vol-pvc   Bound    fio-vol-pv   4Gi        RWO            openebs-zfspv   2m35s
+```
+
+#### Deploy Application
+
+Deploy the application using the persistence volume claim created
+
+```
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  name: fio
+  labels:
+    name: fio
+spec:
+  replicas: 1
+  selector:
+    matchLabels:
+      name: fio
+  template:
+    metadata:
+      labels:
+        name: fio
+    spec:
+      containers:
+        - resources:
+          name: perfrunner
+          image: ljishen/fio
+          imagePullPolicy: IfNotPresent
+          command: ["/bin/sh"]
+          args: ["-c", "while true ;do sleep 50; done"]
+          volumeMounts:
+            - mountPath: /datadir
+              name: fio-vol
+      volumes:
+        - name: fio-vol
+          persistentVolumeClaim:
+            claimName: fio-vol-pvc
+
+$ kubectl apply -f app.yaml
+deployment.apps/fio created
+```
+We can see application is running and data is also visible to it :-
+
+```
+$ kubectl get po
+NAME                   READY   STATUS    RESTARTS   AGE
+fio-569965649c-g8dtx   1/1     Running   0          2m53s
+
+$ kubectl exec -it fio-569965649c-k5v8t sh
+/ # ls /datadir
+a.txt
+```