Skip to content

openrisc/mor1kx

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

mor1kx - an OpenRISC processor IP core

The Basics

This repository contains an OpenRISC 1000 compliant processor IP core.

It is written in Verilog HDL.

This repository only contains the IP source code and some documentation. For a verification environment, please see other projects.

Documentation

The documentation is located in the doc/ directory.

It is in asciidoc format, and there's a makefile to build HTML or PDF documentation. To build the HTML documentation, run the following in the doc/ directory:

  $ make html

License

This project is licensed under the CERN Open Hardware Licence Version 2 - Weakly Reciprocal (CERN-OHL-W). For details please see the LICENSE file or https:/cern.ch/cern-ohl

SPDX-License-Identifier: CERN-OHL-W-2.0

https://spdx.org/licenses/CERN-OHL-W-2.0.html

Configuration

The mor1kx CPU is very configurable to allow you to customize the core to your exact needs. The following tables explain how each parameter can be configured, what the configuration does and why you might want to use it.

Note: The Usage? field below indicates if a certain application (such as running Linux) requires a setting different than the default value.

Basic parameters

Parameter Description Default Values Usage?
OPTION_OPERAND_WIDTH Specify the CPU data and address widths 32 32, 64, etc
OPTION_CPU0 Specify the CPU pipeline core CAPPUCCINO CAPPUCCINO ESPRESSO PRONTO_ESPRESSO CAPPUCCINO for Linux
OPTION_RESET_PC Specify the program counter upon reset 0x100 n

Caching parameters

Parameter Description Default Values Usage?
FEATURE_DATACACHE Enable memory access data caching NONE ENABLED NONE
OPTION_DCACHE_BLOCK_WIDTH Specify the address width of a cache block 5 n
OPTION_DCACHE_SET_WIDTH Specify the set address width 9 n
OPTION_DCACHE_WAYS Specify the number of blocks per set 2 n
OPTION_DCACHE_LIMIT_WIDTH Specify the maximum address width 32 n 31 for Linux to allow uncached device access
OPTION_DCACHE_SNOOP Enable bus snooping for cache coherency NONE ENABLED NONE Linux SMP
FEATURE_INSTRUCTIONCACHE Enable memory access instruction caching NONE ENABLED NONE
OPTION_ICACHE_BLOCK_WIDTH Specify the address width of a cache block 5 n
OPTION_ICACHE_SET_WIDTH Specify the set address width 9 n
OPTION_ICACHE_WAYS Specify the number of blocks per set 2 n
OPTION_ICACHE_LIMIT_WIDTH Specify the maximum address width 32 n

Memory Management Unit (MMU) parameters

Parameter Description Default Values Usage?
FEATURE_DMMU Enable the data bus MMU NONE ENABLED NONE Linux expects ENABLED
FEATURE_DMMU_HW_TLB_RELOAD Enable hardware TLB reload NONE ENABLED NONE Linux expects NONE
OPTION_DMMU_SET_WIDTH Specify the set address width 6 n
OPTION_DMMU_WAYS Specify the number of ways per set 1 n
FEATURE_IMMU Enable the instruction bus MMU NONE ENABLED NONE Linux expects ENABLED
FEATURE_IMMU_HW_TLB_RELOAD Enable hardware TLB reload NONE ENABLED NONE Linux expects NONE
OPTION_IMMU_SET_WIDTH Specify the set address width 6 n
OPTION_IMMU_WAYS Specify the number of ways per set 1 n

System bus parameters

Parameter Description Default Values Usage?
FEATURE_STORE_BUFFER Enable the load store unit store buffer ENABLED ENABLED NONE Large footprint
OPTION_STORE_BUFFER_DEPTH_WIDTH Specify the load store unit store buffer depth 8 1-n
BUS_IF_TYPE Specify the bus interface type WISHBONE32 WISHBONE32
IBUS_WB_TYPE Specify the Instruction bus interface type option B3_READ_BURSTING B3_READ_BURSTING B3_REGISTERED_FEEDBACK CLASSIC
DBUS_WB_TYPE Specify the Data bus interface type option CLASSIC B3_READ_BURSTING B3_REGISTERED_FEEDBACK CLASSIC

Hardware unit configuration parameters

Parameter Description Default Values Usage?
FEATURE_TRACEPORT_EXEC Enable the traceport hardware interface NONE ENABLED NONE Verilator
FEATURE_DEBUGUNIT Enable hardware breakpoints and advanced debug unit interface NONE ENABLED NONE OpenOCD
FEATURE_PERFCOUNTERS Enable the performance counters unit NONE ENABLED NONE
OPTION_PERFCOUNTERS_NUM Specify the number of performance counters to generate 0 n
FEATURE_TIMER Enable the internal OpenRISC timer ENABLED ENABLED NONE
FEATURE_PIC Enable the internal OpenRISC PIC ENABLED ENABLED NONE
OPTION_PIC_TRIGGER Specify the PIC trigger mode LEVEL LEVEL EDGE LATCHED_LEVEL
OPTION_PIC_NMI_WIDTH Specify non maskable interrupts width, starting at 0, these interrupts will not be reset or maskable 0 0-32
OPTION_RF_CLEAR_ON_INIT Enable clearing all registers on initialization 0 0, 1
OPTION_RF_NUM_SHADOW_GPR Specify the number of shadow register files 0 0-16 Set >=1 for Linux SMP
OPTION_RF_ADDR_WIDTH Specify the address width of the register file 5 5
OPTION_RF_WORDS Specify the number of registers in the register file 32 32
FEATURE_FASTCONTEXTS Enable fast context switching of register sets NONE ENABLED NONE
FEATURE_MULTICORE Enable the coreid and numcores SPR registers NONE ENABLED NONE Linux SMP
FEATURE_FPU Enable the FPU, for cappuccino pipeline only NONE ENABLED NONE
FEATURE_BRANCH_PREDICTOR Select the branch predictor implementation SIMPLE SIMPLE GSHARE SAT_COUNTER

Note: C/C++ float to integer conversion assumes truncation (rounding toward zero). lf.ftoi.s instruction performes such rouning regardless of rounding mode bits of FPCSR. All other floating point instructions always perform rounding in according with rounding mode bits of FPCSR.

Exception handling options

Parameter Description Default Values Usage?
FEATURE_DSX Enable setting the SR[DSX] flag when raising exceptions in a delay slot ENABLED ENABLED NONE
FEATURE_RANGE Enable checking and raising range exceptions ENABLED ENABLED NONE
FEATURE_OVERFLOW Enable checking and raising overflow exceptions ENABLED ENABLED NONE

ALU configuration options

Parameter Description Default Values Usage?
FEATURE_MULTIPLIER Specify the multiplier implementation THREESTAGE THREESTAGE PIPELINED SERIAL SIMULATION NONE
FEATURE_DIVIDER Specify the divider implementation SERIAL SERIAL SIMULATION NONE
OPTION_SHIFTER Specify the shifter implementation BARREL BARREL SERIAL
FEATURE_CARRY_FLAG Enable checking and setting the carry flag ENABLED ENABLED NONE

Instruction enabling options

Parameter Description Default Values Usage?
FEATURE_MAC Enable the l.mac* multiply accumulate instructions NONE ENABLED NONE
FEATURE_SYSCALL Enable the 'l.sys` OS syscall instruction ENABLED ENABLED NONE
FEATURE_TRAP Enable the l.trap instruction ENABLED ENABLED NONE GDB
FEATURE_ADDC Enable the l.addc add with carry flag instruction ENABLED ENABLED NONE
FEATURE_SRA Enable the l.sra shirt right arithmetic instruction ENABLED ENABLED NONE
FEATURE_ROR Enable the l.ror* rotate right instructions NONE ENABLED NONE
FEATURE_EXT Enable the l.ext* sign extend instructions NONE ENABLED NONE
FEATURE_CMOV Enable the l.cmov conditional move instruction ENABLED ENABLED NONE
FEATURE_FFL1 Enable the l.f[fl]1 find first/last set bit instructions ENABLED ENABLED NONE Linux
FEATURE_ATOMIC Enable the l.lwa and l.swa atomic instructions ENABLED ENABLED NONE Linux SMP
FEATURE_CUST1 Enable the l.cust* custom instruction NONE ENABLED NONE
FEATURE_CUST2 Enable the l.cust* custom instruction NONE ENABLED NONE
FEATURE_CUST3 Enable the l.cust* custom instruction NONE ENABLED NONE
FEATURE_CUST4 Enable the l.cust* custom instruction NONE ENABLED NONE
FEATURE_CUST5 Enable the l.cust* custom instruction NONE ENABLED NONE
FEATURE_CUST6 Enable the l.cust* custom instruction NONE ENABLED NONE
FEATURE_CUST7 Enable the l.cust* custom instruction NONE ENABLED NONE
FEATURE_CUST8 Enable the l.cust* custom instruction NONE ENABLED NONE

Testing and Continuous Integration

A CPU core cannot be trusted without a full set of verification testing. The mor1kx pipelines are constantly verified for correctness with the or1k Continuous Integration (CI) suite. This currently covers:

  • source linting - a verilator --lint-only check is run on each commit to ensure there are no code quality issues.

  • or1k-tests - the or1k-tests test suite is run against each pipeline to check most major instructions, exception handling, caching, timers, interrupts and other features.

  • mor1kx formal - formal-verification tests are run on the cappuccino pipeline to confirm the processor doesn't encounter undesirable states and identify unseen bugs.

    Status: Build Status

We would also like to add the following tests to our continuous integration suite, if you would like to volunteer please reach out:

  • softfloat, fpu verification (may not be feasable in CI due to long run times)
  • CPU pipeline debugging verification via GDB/OpenOCD
  • Resource utilization regression with yosys synth_intel synth_xilinx
  • Formal verification of ESPRESSO and PRONTO ESPRESSO using yosys-formal.
  • Verification that each revision can boot differnt OS's Linux, RTMES
  • Golden reference or1ksim trace comparisons vs verilog model using constrained random inputs.

Verification status of mor1kx pipelines:

Pipeline Testing Support Comments
CAPPUCCINO Linting or1k-tests formal-verification All supported tests passing
ESPRESSO linting or1k-tests Still many pipeline failures, see issue #71
PRONTO_ESPRESSO linting No toolchain support for no-delayslot c code
MAROCCHINO linting or1k-tests See marocchino project.