ubus: add command to create devices dynamically #28
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
G10h4ck
force-pushed
the
APuP
branch
2 times, most recently
from
dfc8716
to
aa0a147
Compare
Some kind of devices might become available after initial configuration,
and other one like WDS stations or APuP peers can create unpredictably
many linux interfaces like wlan0.peer1 wlan0.peer2...
To use those linux interfaces as a base for other devices on top of those
like 802.1ad devices we need to be able to create them at runtime ofter
thos comes up, so an ubus command have been added for that.
ubus call network add_dynamic_device \
'{"name":"NewDeviceName", "type":"8021ad", \
"ifname":"wlan0.peer1", "vid":"47"}'
This will create the device that can be used for one or more interface
with pre-existent commands
ubus call network add_dynamic \
'{"name":"NewInterfaceName", "proto":"static", "auto":1, \
"device":"NewDeviceName", \
"ipaddr":"192.0.2.0", "netmask":"255.255.255.255"}'
ubus call network.interface.NewInterfaceName up
To inspect the newly created device status a pre-existent command can be
used
ubus call network.device status '{"name":"NewDeviceName"}'
Signed-off-by: Gioacchino Mazzurco <gio@polymathes.cc>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Some kind of devices might become available after initial configuration, and other one like WDS stations or APuP peers can create unpredictably many linux interfaces like wlan0.peer1 wlan0.peer2...
To use those linux interfaces as a base for other devices on top of those like 802.1ad devices we need to be able to create them at runtime ofter thos comes up, so an ubus command have been added for that.
ubus call network add_dynamic_device
'{"name":"NewDeviceName", "type":"8021ad",
"ifname":"wlan0.peer1", "vid":"47"}'
This will create the device that can be used for one or more interface with pre-existent commands
ubus call network add_dynamic
'{"name":"NewInterfaceName", "proto":"static", "auto":1,
"device":"NewDeviceName",
"ipaddr":"192.0.2.0", "netmask":"255.255.255.255"}'
ubus call network.interface.NewInterfaceName up
To inspect the newly created device status a pre-existent command can be used
ubus call network.device status '{"name":"NewDeviceName"}'