Add erratum for issue #2094

ZoL commit 1421c89 unintentionally changed the disk format in a forward-
compatible, but not backward compatible way. This was accomplished by
adding an entry to zbookmark_t, which is included in a couple of
on-disk structures. That lead to the creation of pools with incorrect
dsl_scan_phys_t objects that could only be imported by versions of ZoL
containing that commit.  Such pools cannot be imported by other versions
of ZFS or past versions of ZoL.

The additional field has been removed by the previous commit.  However,
affected pools must be imported and scrubbed using a version of ZoL with
this commit applied.  This will return the pools to a state in which they
may be imported by other implementations.

The 'zpool import' or 'zpool status' command can be used to determine if
a pool is impacted.  A message similar to one of the following means your
pool must be scrubbed to restore compatibility.

$ zpool import
   pool: zol-0.6.2-173
     id: 1165955789558693437
  state: ONLINE
 status: Errata #1 detected.
 action: The pool can be imported using its name or numeric identifier,
         however there is a compatibility issue which should be corrected
         by running 'zpool scrub'
    see: http://zfsonlinux.org/msg/ZFS-8000-ER
 config:
 ...

$ zpool status
  pool: zol-0.6.2-173
 state: ONLINE
  scan: pool compatibility issue detected.
   see: #2094
action: To correct the issue run 'zpool scrub'.
config:
...

If there was an async destroy in progress 'zpool import' will prevent
the pool from being imported.  Further advice on how to proceed will be
provided by the error message as follows.

$ zpool import
   pool: zol-0.6.2-173
     id: 1165955789558693437
  state: ONLINE
 status: Errata #2 detected.
 action: The pool can not be imported with this version of ZFS due to an
         active asynchronous destroy.  Revert to an earlier version and
         allow the destroy to complete before updating.
         see: http://zfsonlinux.org/msg/ZFS-8000-ER
 config:
 ...

Pools affected by the damaged dsl_scan_phys_t can be detected prior to
an upgrade by running the following command as root:

zdb -dddd poolname 1 | grep -P '^\t\tscan = ' | sed -e 's;scan = ;;' | wc -w

Note that `poolname` must be replaced with the name of the pool you wish
to check. A value of 25 indicates the dsl_scan_phys_t has been damaged.
A value of 24 indicates that the dsl_scan_phys_t is normal. A value of 0
indicates that there has never been a scrub run on the pool.

The regression caused by the change to zbookmark_t never made it into a
tagged release, Gentoo backports, Ubuntu, Debian, Fedora, or EPEL
stable respositorys.  Only those using the HEAD version directly from
Github after the 0.6.2 but before the 0.6.3 tag are affected.

This patch does have one limitation that should be mentioned.  It will not
detect errata #2 on a pool unless errata #1 is also present.  It expected
this will not be a significant problem because pools impacted by errata #2
have a high probably of being impacted by errata #1.

End users can ensure they do no hit this unlikely case by waiting for all
asynchronous destroy operations to complete before updating ZoL.  The
presence of any background destroys on any imported pools can be checked
by running `zpool get freeing` as root.  This will display a non-zero
value for any pool with an active asynchronous destroy.

Lastly, it is expected that no user data has been lost as a result of
this erratum.

Original-patch-by: Tim Chase <tim@chase2k.com>
Reworked-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2094

cmd/zpool/zpool_main.c

@@ -1747,6 +1747,23 @@ show_import(nvlist_t *config)
 			case ZPOOL_ERRATA_NONE:
 				break;
 
+			case ZPOOL_ERRATA_ZOL_2094_SCRUB:
+				(void) printf(gettext(" action: The pool can "
+				    "be imported using its name or numeric "
+				    "identifier,\n\thowever there is a compat"
+				    "ibility issue which should be corrected"
+				    "\n\tby running 'zpool scrub'\n"));
+				break;
+
+			case ZPOOL_ERRATA_ZOL_2094_ASYNC_DESTROY:
+				(void) printf(gettext(" action: The pool can"
+				    "not be imported with this version of ZFS "
+				    "due to\n\tan active asynchronous destroy. "
+				    "Revert to an earlier version\n\tand "
+				    "allow the destroy to complete before "
+				    "updating.\n"));
+				break;
+
 			default:
 				/*
 				 * All errata must contain an action message.
@@ -4375,6 +4392,11 @@ status_callback(zpool_handle_t *zhp, void *data)
 		case ZPOOL_ERRATA_NONE:
 			break;
 
+		case ZPOOL_ERRATA_ZOL_2094_SCRUB:
+			(void) printf(gettext("action: To correct the issue "
+			    "run 'zpool scrub'.\n"));
+			break;
+
 		default:
 			/*
 			 * All errata which allow the pool to be imported

include/sys/dsl_scan.h

@@ -72,6 +72,8 @@ typedef enum dsl_scan_flags {
 	DSF_VISIT_DS_AGAIN = 1<<0,
 } dsl_scan_flags_t;
 
+#define	DSL_SCAN_FLAGS_MASK (DSF_VISIT_DS_AGAIN)
+
 /*
  * Every pool will have one dsl_scan_t and this structure will contain
  * in-memory information about the scan and a pointer to the on-disk

include/sys/fs/zfs.h

@@ -713,6 +713,8 @@ typedef enum dsl_scan_state {
  */
 typedef enum zpool_errata {
 	ZPOOL_ERRATA_NONE,
+	ZPOOL_ERRATA_ZOL_2094_SCRUB,
+	ZPOOL_ERRATA_ZOL_2094_ASYNC_DESTROY,
 } zpool_errata_t;
 
 /*

module/zfs/dsl_scan.c

@@ -123,6 +123,42 @@ dsl_scan_init(dsl_pool_t *dp, uint64_t txg)
 		err = zap_lookup(dp->dp_meta_objset, DMU_POOL_DIRECTORY_OBJECT,
 		    DMU_POOL_SCAN, sizeof (uint64_t), SCAN_PHYS_NUMINTS,
 		    &scn->scn_phys);
+		/*
+		 * Detect if the pool contains the signature of #2094.  If it
+		 * does properly update the scn->scn_phys structure and notify
+		 * the administrator by setting an errata for the pool.
+		 */
+		if (err == EOVERFLOW) {
+			uint64_t zaptmp[SCAN_PHYS_NUMINTS + 1];
+			VERIFY3S(SCAN_PHYS_NUMINTS, ==, 24);
+			VERIFY3S(offsetof(dsl_scan_phys_t, scn_flags), ==,
+			    (23 * sizeof (uint64_t)));
+
+			err = zap_lookup(dp->dp_meta_objset,
+			    DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_SCAN,
+			    sizeof (uint64_t), SCAN_PHYS_NUMINTS + 1, &zaptmp);
+			if (err == 0) {
+				uint64_t overflow = zaptmp[SCAN_PHYS_NUMINTS];
+
+				if (overflow & ~DSL_SCAN_FLAGS_MASK ||
+				    scn->scn_async_destroying) {
+					spa->spa_errata =
+					    ZPOOL_ERRATA_ZOL_2094_ASYNC_DESTROY;
+					return (EOVERFLOW);
+				}
+
+				bcopy(zaptmp, &scn->scn_phys,
+				    SCAN_PHYS_NUMINTS * sizeof (uint64_t));
+				scn->scn_phys.scn_flags = overflow;
+
+				/* Required scrub already in progress. */
+				if (scn->scn_phys.scn_state == DSS_FINISHED ||
+				    scn->scn_phys.scn_state == DSS_CANCELED)
+					spa->spa_errata =
+					    ZPOOL_ERRATA_ZOL_2094_SCRUB;
+			}
+		}
+
 		if (err == ENOENT)
 			return (0);
 		else if (err)
@@ -319,6 +355,9 @@ dsl_scan_done(dsl_scan_t *scn, boolean_t complete, dmu_tx_t *tx)
 	}
 
 	scn->scn_phys.scn_end_time = gethrestime_sec();
+
+	if (spa->spa_errata == ZPOOL_ERRATA_ZOL_2094_SCRUB)
+		spa->spa_errata = 0;
 }
 
 /* ARGSUSED */