Skip to content

Tool used by OSIE to configure various operating systems networking

Notifications You must be signed in to change notification settings

packethost/packet-networking

Repository files navigation

Packet Networking

This is a tool to replace the network.py file in OSIE by breaking out the network configurations into sub packages.

Requirements

  • python version 3.5 or higher
  • pip
  • lshw version B.02.18 or higher

Installation

pip3 install packet-networking

Usage

# packet-networking --help
Usage: packet-networking [OPTIONS]

Options:
  -M, --metadata-file FILENAME  Load metadata from a file rather than a URL
  --metadata-url TEXT           URL to download metadata from
  -o, --operating-system TEXT   Operating System and version (ex: centos 7)
  -t, --rootfs PATH             Path to root filesystem  [required]
  --resolvers TEXT              Comma separated list of resolvers to be used
                                (otherwise uses ones from /etc/resolv.conf)
  -v, --verbose                 Provide more detailed output
  -q, --quiet                   Silences all output
  --help                        Show this message and exit.

By default --metadata-url points to http://metadata.packet.net/metadata.

Additionally, if --metadata-file is specified, it will override the --metadata-url.

Example

# packet-networking --metadata-file /tmp/metadata.json -o 'centos 7' --rootfs /tmp/rootfs -vvv
DEBUG:packetnetworking:Metadata file '/tmp/metadata.json' specified, preferring over metadata url.
name=ens33 driver=e1000
name=veth1cb3c99 driver=veth
name=vethe927707 driver=veth
name=virbr0-nic driver=tun
name=virbr0 driver=bridge
name=vethab8fe13 driver=veth
name=br-9ffe68216dc5 driver=bridge
name=veth2dd8fc1 driver=veth
name=docker0 driver=bridge
name=ens33 driver=e1000
name=veth1cb3c99 driver=veth
name=vethe927707 driver=veth
name=virbr0-nic driver=tun
name=virbr0 driver=bridge
name=vethab8fe13 driver=veth
name=br-9ffe68216dc5 driver=bridge
name=veth2dd8fc1 driver=veth
name=docker0 driver=bridge
DEBUG:root:Processing task: 'etc/resolv.conf'
DEBUG:root:Processing task: 'etc/systemd/system/multi-user.target.wants/NetworkManager.service'
DEBUG:root:Processing task: 'etc/sysconfig/network-scripts/ifcfg-bond0:0'
DEBUG:root:Processing task: 'etc/sysconfig/network-scripts/route-bond0'
DEBUG:root:Processing task: 'etc/modprobe.d/bonding.conf'
DEBUG:root:Processing task: 'etc/systemd/system/dbus-org.freedesktop.nm-dispatcher.service'
DEBUG:root:Processing task: 'etc/hostname'
DEBUG:root:Processing task: 'etc/hosts'
DEBUG:root:Processing task: 'etc/sysconfig/network-scripts/ifcfg-bond0'
DEBUG:root:Processing task: 'etc/sysconfig/network'
DEBUG:root:Processing task: 'etc/systemd/system/dbus-org.freedesktop.NetworkManager.service'
DEBUG:root:Processing task: 'sbin/ifup-pre-local'
DEBUG:root:Processing task: 'etc/sysconfig/network-scripts/ifcfg-ens33'
Configuration files written to root filesystem '/tmp/rootfs'

Here is an example of the files created

# find /tmp/rootfs/
/tmp/rootfs/
/tmp/rootfs/etc
/tmp/rootfs/etc/modprobe.d
/tmp/rootfs/etc/modprobe.d/bonding.conf
/tmp/rootfs/etc/sysconfig
/tmp/rootfs/etc/sysconfig/network-scripts
/tmp/rootfs/etc/sysconfig/network-scripts/ifcfg-bond0
/tmp/rootfs/etc/sysconfig/network-scripts/ifcfg-ens33
/tmp/rootfs/etc/sysconfig/network-scripts/ifcfg-bond0:0
/tmp/rootfs/etc/sysconfig/network-scripts/route-bond0
/tmp/rootfs/etc/sysconfig/network
/tmp/rootfs/etc/hosts
/tmp/rootfs/etc/hostname
/tmp/rootfs/etc/resolv.conf
/tmp/rootfs/sbin
/tmp/rootfs/sbin/ifup-pre-local

Extending and manipulating data

Distro Builders

Currently each distro family has their own distro builder. For instance, the Debian builder encompasses both Debian and Ubuntu distros. For the RedHat family of distros, RedHat, CentOS and Scientific Linux are all under the RedHat builder.

Each distro has a Distro Builder that defines which OS's it supports along with the different Network Builder classes it can implement. Below is a snippet of the DebianBuilder

class DebianBuilder(DistroBuilder):
    distros = ["debian", "ubuntu"]
    network_builders = [DebianBondedNetwork]

Here we can see both Debian and Ubuntu distros are supported, and the only supported network builder is a bonded configuration.

Network Builders

At the moment, the only supported network configuration at Packet is a bonded configuration. In the future will be able to add more network builders to support different network configurations.

Here is a small snippet of the the DebianBondedNetwork, some lines have been removed for brevity.

class DebianBondedNetwork(NetworkBuilder):
    def build(self):
        self.build_tasks()

    def build_tasks(self):
        self.tasks = {}
        self.tasks[
            "etc/network/interfaces"
        ] = """\
            auto lo
            iface lo inet loopback

            auto bond0
            iface bond0 inet static
                {% if ip4pub %}
                address {{ ip4pub.address }}
                netmask {{ ip4pub.netmask }}
                gateway {{ ip4pub.gateway }}
                {% else %}
                address {{ ip4priv.address }}
                netmask {{ ip4priv.netmask }}
                gateway {{ ip4priv.gateway }}
                {% endif %}
        """

        self.tasks[
            "etc/resolv.conf"
        ] = """\
            {% for server in resolvers %}
            nameserver {{ server }}
            {% endfor %}
        """

        return self.tasks

Currently, since the bonded network is the only configuration, we can simply call build_tasks from the build method. However in future we could add some conditions to run the build_tasks method if necessary.

build_tasks simple adds all the templates for each file to a dictionary that will later be processed by the Network Builder's render method. Render will render each template and return the updated task list. The render function is called from within the run method, which after receiving the rendered tasks, will actually write or delete the files.

Hooks

In some instances, we need to modify the data before we process the builders. One of these instances are for plans which should only have a single interface, we want to make sure we only pass a single interface along to the builders.

For this we have a hook system. You can define a class which inherits the BuilderHook class and define one or more hooks in that class.

For the above example where we should only have a single interface, a hook can be created after initalization (initialized). You can view the full code at hooks/single_interface_hook.py. However, here is a snippet.

class SingleInterfaceHook(BuilderHook):
    plans = ["baremetal_1e", "x1.small.x86"]

    def hook_initialized(self, builder):
        if builder.metadata.plan.lower() in self.plans:
            builder.network.interfaces = builder.network.interfaces[:1]

After defining a new hook, simply import it and add it to the __all__ variable in hooks/__init__.py and you're ready to go.

Each time a hook is triggered, a new instance of the class will be created and the the corresponding hook_* function will be executed. The first argument passed to each hook function is the Builder instance. This contains the metadata and the initialized network details.

Triggers can define additional arguments and keyword arguments that will be passed to each hook triggered.

Running Tests

git clone git@github.com:packethost/packet-networking.git
cd packet-networking/
pip3 install -e .[test]
py.test packetnetworking

Example Output:

# py.test packetnetworking
===================================== test session starts ======================================
platform linux -- Python 3.5.2, pytest-5.0.1, py-1.8.0, pluggy-0.12.0
rootdir: /home/packet/packet-networking
collected 3 items

packetnetworking/distros/redhat/test_bonded.py ...                                       [100%]

=================================== 3 passed in 0.13 seconds ===================================