KBParadise V60Mini Custom Firmware Project

A project to disassemble the KBParadise V60Mini keyboard firmware.

With help from the following people:

• Jeroen (Spritetm) at http://spritesmods.com/
• Charlie https://github.com/ChaoticConundrum
• and others...

Without your help, this project would not have been possible. Thanks everyone!

WARNING

I take ABSOLUTELY NO responsibilities if your keyboard turns into an expensive brick! Use this at your own risk.

Usage

First, make sure your keyboard is:

• ANSI US version
• on firmware 1.0.7 (WIP: might not be required anymore)

THIS IS VERY IMPORTANT!
Use the updater from Windows to update the keyboard if not already done.
(WIP Note: this might not be necessary anymore)

You can find the original and patched version of the firmware exe in the firmware/ folder, along with their SHA1 sums:
https://github.com/pellettiero/V60Mini-firmhack/tree/master/firmware

Run this on Windows as Administrator to unlock the keyboard.
Remember to check the SHA1 sums just to be sure to avoid a brick.

Disassemble and Unlock

If you want to do it the manual way, or just to disassemble the firmware itself:

• If you want to decrypt the updater:

  $ updater_decrypt.sh cykb112_v107.exe
  

  You can disassemble the decrypted file with disassemble.sh.

• If you instead want to unlock the keyboard:

  $ updater_patcher.sh cykb112_v107.exe
  

  Get the output executable from the directory and run it on Windows with admin permissions.
  Fingers crossed! (Still working on a way to do this from Linux itself)

  The patched updater is checked with SHA1 to avoid arbitrary fuckups.
  Check this issue to get an explanation of how the unlock works:
  pok3r-custom/pok3r_re_firmware#4

Flash backup

You can then try to dump the flash by using pok3rtool:
Prerequisites: cmake git libusb libusb-compat

1. Clone the repo

$ git clone https://github.com/pok3r-custom/pok3rtool

2. Build

$ cd pok3rtool
$ git submodule update --init && cmake . && make pok3rtool

It will take a while, be patient.

3. Reboot into bootloader

$ sudo ./pok3rtool -t kbpv60 bootloader

4. Dump flash and reboot to firmware

$ sudo ./pok3rtool -t kbpv60 dump flash.bin
$ sudo ./pok3rtool -t kbpv60 reboot

Now you have a backup of the entire flash! Store this in a safe place, just in case of bricks.
It can be restored using a JTAG programmer/debugger.

Set a firmware version

You also might want to set a different firmware version to remind yourself this keyboard is now unlocked.
To do so:

$ sudo ./pok3rtool -t kbpv60 bootloader
$ sudo ./pok3rtool -t kbpv60 setversion 1.0.7u
$ sudo ./pok3rtool -t kbpv60 reboot

Just remember the small u means "unlocked".
You'll be able to check the version using
sudo ./pok3rtool list
or
sudo ./pok3rtool -t kbpv60 version
(this command might only work with the keyboard in bootloader mode)

Roadmap

• Find a way to decrypt firmware from updater
• Mod updater to unlock keyboard and allow reading flash
• Unlock keyboard and dump flash
• Find bootloader XOR encryption key in disassembled bootloader (same as pok3r)
• Find out how the USB packets are encrypted No need, works natively with pok3r commands
• Custom firmware? WIP

Notes

• Official flashing tool compares last two bytes of firmware to find the XOR encryption key
• 0x0023c1 contains the following string, where each letter takes up a byte: "USB-HID Keyboard"

Bugs

• When DIP switch 6 is ON (switches FN with ALTGR and MENU with FN), pressing FN+ENTER (arrow mode) overwrites the FN function with the DOWN arrow. No way to exit this mode unless DIP switch 6 is returned to original position.