Skip to content

convert 7-Zip hashcat hashes back to 7z archives

License

Notifications You must be signed in to change notification settings

philsmd/hc_to_7z

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

21 Commits
 
 
 
 
 
 

Repository files navigation

About

The goal of this project is to have a tool that can be used to convert -m 11600 = 7-Zip hashcat hashes back to .7z files, that can be opened with standard archive tools/viewers like p7zip/7z/ark etc. The input to this hc_to_7z tool is the output of 7z2hashcat from https://github.com/philsmd/7z2hashcat

Requirements

Software:

  • Perl must be installed (should work on *nix and windows with perl installed)
  • Perl module "Digest::CRC" is required
    • example on how to install it on ubuntu:
      sudo apt install libdigest-crc-perl
      or
      sudo cpan Digest::CRC

Installation and first steps

  • Clone this repository:
    git clone https://github.com/philsmd/hc_to_7z
  • Enter the repository root folder:
    cd hc_to_7z
  • Run it in your terminal/shell/cmd:
    perl hc_to_7z.pl hashes.txt
  • Open the file mentioned within your terminal/shell with your preferred archive tool/viewer

Note that hc_to_7z is a terminal application. This means that you need to open your shell program like cmd or konsole/shell/xterm first and afterwards run this perl script.

Command line parameters

The usage is very simple: you just specify the path to the 7-Zip hash file as the first command line argument.

You can also use multiple files on the command line like this:

perl hc_to_7z.pl hash*.txt
perl hc_to_7z.pl hash_files/*

More example commands:

perl hc_to_7z.pl hash.txt
perl hc_to_7z.pl --version
perl hc_to_7z.pl --help
perl hc_to_7z.pl -o output.7z hash.txt
perl hc_to_7z.pl -o jingle.wav.7z -n jingle.wav hash.txt

Proof of concept / experimental warning

Please be aware that this tool is highly experimental and was originally meant only as a POC (proof of concept) to help convert some hashcat users's hashes back to working .7z files, for debugging purposes.

The support of unusual and more advanced combinations of coders and preprocessors (see 7z2hashcat README from https://github.com/philsmd/7z2hashcat) is not supported yet (or only very limited support was added, untested).

With the original 7z file (i.e. having/obtaining the 7-Zip instead of only the hash file), it would be possible to debug/troubleshoot the conversion such that you can help to add many, many more features and debug hc_to_7z to make the file written by hc_to_7z almost identical to the input file.

Being a POC, a lot of small refactorings would be required (especially to avoid many large functions, introduce much more helper functions, avoid duplication of code etc) to make the code more readable and stable, this (quick) implementation of course was not focusing on making the code easy to read and easy to understand. A little bit of refactoring would fix this problem easily.

Please also note that the external tool 7z2hashcat does not convert the file to a hash without losing information. The transformation/conversion by 7z2hashcat is lossy / not lossless and therefore hc_to_7z can never have all the correct information (including original file names etc). Many values, properties and attributes used by hc_to_7z will therefore just be constant values or dynamically implied/guessed/calculated/determined values.

Integrity test failure

Sometimes the so-called "integrity test" that is offered/available by some tools, when you run it on the file written by hc_to_7z, could fail. This is normally only the case whenever the original archive had more than 1 file compressed and encrypted and they all were part of the same 7z stream data. This could happen if you have multiple files and a single stream "compresses" all of them with one coder (compression algorithm, like LZMA2).

Therefore, we would need to both decrypt and decompress the data to see what the raw data of the first file would be (we know only the first file's length) and then we would either need to re-compress and re-encrypt the data, which is stream data belonging to more files, with just the raw data of the first file - but this could be considered a little bit of cheating, because we would actually change the original file data -, or use this information to indicate within the written 7-Zip file, that we have 2+ files with specific file lengths (but we can't be 100% sure where the next boundaries are, between file 2 and file 3 etc).

Unfortunately, 7z2hashcat itself does not give us all of this information, i.e. we do not know all the file lengths for each and every file belonging to the same stream, we only know the length of the first file.

That said, the data for the first file within the output file, written by hc_to_7z, should still be 100% complete and correct (we know this also by the first file's CRC32 checksum), it is just the "extra data" of this "stream" that will make the integrity test (e.g. 7z t tmp.7z) fail (but fortunately most tools can still extract the data correctly, even if there is "more data"), i.e. data which would normally belong to the next (second, third, ...) files.

We can't easily fix this, because a fix would only make sense if either 7z2hashcat outputs much more info, or if we try to perform even more advanced parsing of the data, i.e. decryption/decoding/decompression/pre-processing within hc_to_7z of this stream data. It would be a little bit exaggerated to do all this in this POC tool (we would need to add many compression/decompression algorithms and pre-processing filters in this perl script, like LZMA2, Delta etc), just to make the integrity test not fail.

Hacking / Missing features

  • More features
  • CLEANUP the code, refactor, use more coding standards, make it easier readable, everything is welcome (submit patches!)
  • keep it up-to-date with 7z2hashcat
  • improvements and all bug fixes are very welcome
  • solve and remove the TODOs (if any exist)
  • and,and,and

Credits and Contributors

Credits go to:

  • philsmd, hashcat project

License/Disclaimer

License: belongs to the PUBLIC DOMAIN, donated to hashcat, credits MUST go to hashcat and philsmd for their hard work. Thx

Disclaimer: WE PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

NO GUARANTEES THAT IT WORKS FOR YOU AND WORKS CORRECTLY

About

convert 7-Zip hashcat hashes back to 7z archives

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages