Adjusted tabs to 2 spaces

enviro/__init__.py

@@ -154,89 +154,89 @@ def stop_activity_led():
 print("")
 
 def reconnect_wifi(ssid, password, country):
-    import time
-    import network
-    import math
-    import rp2
-    import ubinascii
-    
-    start_ms = time.ticks_ms()
-
-    # Set country
-    rp2.country(country)
-
-    # Reference: https://datasheets.raspberrypi.com/picow/connecting-to-the-internet-with-pico-w.pdf
-    CYW43_LINK_DOWN = 0
-    CYW43_LINK_JOIN = 1
-    CYW43_LINK_NOIP = 2
-    CYW43_LINK_UP = 3
-    CYW43_LINK_FAIL = -1
-    CYW43_LINK_NONET = -2
-    CYW43_LINK_BADAUTH = -3
-
-    status_names = {
-        CYW43_LINK_DOWN: "Link is down",
-        CYW43_LINK_JOIN: "Connected to wifi",
-        CYW43_LINK_NOIP: "Connected to wifi, but no IP address",
-        CYW43_LINK_UP: "Connect to wifi with an IP address",
-        CYW43_LINK_FAIL: "Connection failed",
-        CYW43_LINK_NONET: "No matching SSID found (could be out of range, or down)",
-        CYW43_LINK_BADAUTH: "Authenticatation failure",
-    }
+  import time
+  import network
+  import math
+  import rp2
+  import ubinascii
+
+  start_ms = time.ticks_ms()
+
+  # Set country
+  rp2.country(country)
+
+  # Reference: https://datasheets.raspberrypi.com/picow/connecting-to-the-internet-with-pico-w.pdf
+  CYW43_LINK_DOWN = 0
+  CYW43_LINK_JOIN = 1
+  CYW43_LINK_NOIP = 2
+  CYW43_LINK_UP = 3
+  CYW43_LINK_FAIL = -1
+  CYW43_LINK_NONET = -2
+  CYW43_LINK_BADAUTH = -3
+
+  status_names = {
+    CYW43_LINK_DOWN: "Link is down",
+    CYW43_LINK_JOIN: "Connected to wifi",
+    CYW43_LINK_NOIP: "Connected to wifi, but no IP address",
+    CYW43_LINK_UP: "Connect to wifi with an IP address",
+    CYW43_LINK_FAIL: "Connection failed",
+    CYW43_LINK_NONET: "No matching SSID found (could be out of range, or down)",
+    CYW43_LINK_BADAUTH: "Authenticatation failure",
+  }
 
-    wlan = network.WLAN(network.STA_IF)
+  wlan = network.WLAN(network.STA_IF)
 
-    def dump_status():
-        status = wlan.status()
-        logging.info(f"> active: {1 if wlan.active() else 0}, status: {status} ({status_names[status]})")
-        return status
-
-    # Return True on expected status, exception on error status (negative) and False on timeout
-    def wait_status(expected_status, *, timeout=10, tick_sleep=0.5):
-        for i in range(math.ceil(timeout / tick_sleep)):
-            time.sleep(tick_sleep)
-            status = dump_status()
-            if status == expected_status:
-                return True
-            if status < 0:
-                raise Exception(status_names[status])
-        return False
+  def dump_status():
+    status = wlan.status()
+    logging.info(f"> active: {1 if wlan.active() else 0}, status: {status} ({status_names[status]})")
+    return status
 
-    wlan.active(True)
-    # Disable power saving mode if on USB power
-    if vbus_present:
-      wlan.config(pm=0xa11140)
+  # Return True on expected status, exception on error status (negative) and False on timeout
+  def wait_status(expected_status, *, timeout=10, tick_sleep=0.5):
+    for i in range(math.ceil(timeout / tick_sleep)):
+      time.sleep(tick_sleep)
+      status = dump_status()
+      if status == expected_status:
+        return True
+      if status < 0:
+        raise Exception(status_names[status])
+    return False
 
-    # Print MAC
-    mac = ubinascii.hexlify(wlan.config('mac'),':').decode()
-    logging.info("> MAC: " + mac)
-
-    # Disconnect when necessary
-    status = dump_status()
-    if status >= CYW43_LINK_JOIN and status <= CYW43_LINK_UP:
-        logging.info("> Disconnecting...")
-        wlan.disconnect()
-        try:
-            wait_status(CYW43_LINK_DOWN)
-        except Exception as x:
-            raise Exception(f"Failed to disconnect: {x}")
-    logging.info("> Ready for connection!")
-
-    # Connect to our AP
-    logging.info(f"> Connecting to SSID {ssid} (password: {password})...")
-    wlan.connect(ssid, password)
+  wlan.active(True)
+  # Disable power saving mode if on USB power
+  if vbus_present:
+    wlan.config(pm=0xa11140)
+
+  # Print MAC
+  mac = ubinascii.hexlify(wlan.config('mac'),':').decode()
+  logging.info("> MAC: " + mac)
+
+  # Disconnect when necessary
+  status = dump_status()
+  if status >= CYW43_LINK_JOIN and status <= CYW43_LINK_UP:
+    logging.info("> Disconnecting...")
+    wlan.disconnect()
     try:
-        wait_status(CYW43_LINK_UP)
+      wait_status(CYW43_LINK_DOWN)
     except Exception as x:
-        raise Exception(f"Failed to connect to SSID {ssid} (password: {password}): {x}")
-    logging.info("> Connected successfully!")
+      raise Exception(f"Failed to disconnect: {x}")
+  logging.info("> Ready for connection!")
 
-    ip, subnet, gateway, dns = wlan.ifconfig()
-    logging.info(f"> IP: {ip}, Subnet: {subnet}, Gateway: {gateway}, DNS: {dns}")
-
-    elapsed_ms = time.ticks_ms() - start_ms
-    logging.info(f"> Elapsed: {elapsed_ms}ms")
-    return elapsed_ms
+  # Connect to our AP
+  logging.info(f"> Connecting to SSID {ssid} (password: {password})...")
+  wlan.connect(ssid, password)
+  try:
+    wait_status(CYW43_LINK_UP)
+  except Exception as x:
+    raise Exception(f"Failed to connect to SSID {ssid} (password: {password}): {x}")
+  logging.info("> Connected successfully!")
+
+  ip, subnet, gateway, dns = wlan.ifconfig()
+  logging.info(f"> IP: {ip}, Subnet: {subnet}, Gateway: {gateway}, DNS: {dns}")
+
+  elapsed_ms = time.ticks_ms() - start_ms
+  logging.info(f"> Elapsed: {elapsed_ms}ms")
+  return elapsed_ms
 
 def connect_to_wifi():
   try: