Fix Recon Modulation/Bandwidth presets #1913
Merged
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
I adjusted all of the presets in RECON.TXT. The bandwidth was using an undefined enum (DSB) on AM, and the rest of the presets were using WFM modulation with 16k bandwidth. 16k is only an option for NFM modulation in the firmware.
Amateur radio operators generally use AM LSB-3k for frequencies below 10MHz and AM USB+3k from 10MHz to 30MHz, so I adjusted those accordingly and changed all WFM presets to NFM, as WFM 40k/180k/200k is never found in any of the frequency ranges in RECON.TXT.
This has made the Recon app much more useful on my personal device.