smbus-ssd1306

Do YOU want to have an SSD in your personal computer or laptop? Yeah you do. I'm of course talking about the SSD1306, a small OLED display controller which is able to communicate with a host microcontroller via I2C or SPI. This project uses I2C.

Q: Microcontroller? Weren't we talking about a full-blown computer?
A: Your computer actually has multiple I2C buses. For example, mine has 7.

Q: Did you really cut an ugly hole in your laptop for this?
A: Yes.

⚠️ Warning: This project is Linux-only and requires some electronics knowledge. You are going to have to solder wires to your motherboard and connect a device which it does not expect to it! I am not responsible for any damage.

This version is a complete rewrite of the one I initially created 2 years ago. At about that time, I got a new laptop and thought that I'd install a display in it once the first breakdown occurs, since it wouldn't be a shame if I end up breaking it some more while installing the upgrade. Well, it has, so I resurrected the project!

Features

• Multiple screens with different information
• Framework to add custom screens
• Works with slow buses (100 kHz)
• Control over D-Bus

Built-in Screens

1. Power: battery percentage, charge/discharge status, wattage, time to empty/full

   

2. Media: source, status, artist, title, time, length, VU meter

   

3. Cute New year animation

4. Sleep: moving "zzz" symbol when system is asleep

Setup

1. Acquire an SSD1306 module that's wired to use the I2C interface.
2. Find a schematic (and, preferably, a boardview) for your motherboard. If you can't find any, please consider supporting Right to Repair.
3. Find a convenient place to connect to an SMB or I2C interface. It consists of two data lines: SDA (or DAT) and SCL (or CLK). You might have to try several of them before i2cdetect is able to detect a display on one. The most straightforward one to find is the external DDC (Display Data Channel) on HDMI, DVI and VGA connectors (DP doesn't have one).
4. Find a power rail to power the display with. Those convenient blue modules feature an onboard 5V-to-3.3V regulator, so if you're using one find a 5V rail. Otherwise find a 3.3V power rail. Note: some power rails are labeled SUS, which stands for "suspend" and has, in fact, nothing to do with the slang terms used by many 2018 multiplayer social deduction video game "Among Us" players. You probably don't want to use them as they're active even while the computer is powered down.
5. Connect your display to those pins.
6. Run i2cdetect 0 (from the i2c-tools package on most distros) and check if it has found a device at address 0x3C or 0x3D - that's the display. If not:
   6.1. run i2cdetect -l to list all I2C adapters, try all of them and see if the display shows up on any of them;
   6.2. check your wiring and try again.
7. Clone this repo and install its dependencies (poetry install)
8. Tweak the configuration in config.py
9. Run! poetry run python main.py

Usage

Normal operation:

$ poetry run python main.py

If you just want it to clear the screen and exit, pass blank (useful for pre-shutdown scripts):

$ poetry run python main.py blank

Play Bad Apple:

$ poetry run python main.py bad_apple

Example Systemd Unit

1. Create /usr/lib/systemd/user/ssd1306.service:

   [Unit]
   Description=SSD1306 control software
   Requires=dbus.service
   After=dbus.service
   
   [Service]
   Type=simple
   WorkingDirectory=/path/to/smbus-ssd1306 # <-- change this
   Environment="DISPLAY=:1"
   ExecStart=sh -c "poetry run python main.py"
   ExecStopPost=sh -c "poetry run python main.py blank"
   Restart=on-failure
   Slice=session.slice
   
   [Install]
   WantedBy=default.target
   

2. Start and enable the service:

   systemctl --user enable ssd1306 --now
   

Control Over D-Bus

• Service: ru.psi3.ssd1306
• Object path: /ru/psi3/ssd1306/screens
• Interface: ru.psi3.ssd1306.Screen
  • Overtake(number, duration), type ii displays screen number number for duration ms
  • SwitchPin() pins or unpins the currently displayed screen

Make Your Own Screen

TODO