Can't get MIDI button navigation to work

[magnusg-sa]

Hello!

First of all thank you for such an amazing project. It's fantastic that you can get such lush DX7 sounds out of a RPi. ✨😃

Now to my problem. 🙁 I have an Arturia KeyLab 61 Essential that I want to use with my MiniDexed Raspberry Pi. I followed the steps in this tutorial which has exactly the same MIDI keyboard as me. I entered the values for the MIDI button navigation section stated in the tutorial (see below). I have also verified on the MIDI keyboard screen that these are the CC values triggered by the pads. But when I press the pads the MiniDexed plays sounds instead of navigate the menu.

Does any one have any suggestion of what I might do wrong here? Any help is appreciated!

#  Specify MIDI CC to act as a button (0 = ununsed, so don't use CC 0)
#  NB: Off < 64 < ON
# CC channel: 0=OFF; 1-16 MIDI Ch; >16 Omni
# If MIDIButtonNotes>0 then treat MIDIButton numbers as MIDI
# Note numbers, triggered with NoteOn/NoteOff, not CC numbers.
MIDIButtonCh=10
MIDIButtonNotes=1
MIDIButtonPrev=36
MIDIButtonNext=37
MIDIButtonBack=38
MIDIButtonSelect=39
MIDIButtonHome=43
MIDIButtonPgmUp=41
MIDIButtonPgmDown=40
MIDIButtonTGUp=0
MIDIButtonTGDown=0

HW: Raspberry Pi 2B
Version: MiniDexed_2024-08-05-f6ebd78

Full minidexed.ini:
minidexed.ini.txt

[magnusg-sa]

UPDATE: I changed the MIDI Keyboard to use channel 9 for the pads, and changed the MIDIButtonCh=10 to MIDIButtonCh=9 and now it works! I don't know why it didn't work when I had the pads set to 10 but I am glad that it works now.