-
|
Based on the description I should be able to install tar/tar.xz packages from USB drive.
In both cases I could not see them in the list. USB was formatted as FAT32 and saw it as possible destination for installations. |
Beta Was this translation helpful? Give feedback.
Replies: 1 comment
-
|
Matt didn't give you the whole picture. The tar.xz file is the only additional file you need. You still need all the additional files to describe the OS to PINN. |
Beta Was this translation helpful? Give feedback.
Matt didn't give you the whole picture. The tar.xz file is the only additional file you need. You still need all the additional files to describe the OS to PINN.
You need to take a copy of the whole of the PINN Batocera folder and replace the tar.xz file. Ideally you should update the json files too, and if there are any checksums, you probably need to update or delete them.
You need to put the folder under the /os/ folder on your FAT32 formatted USB stick. The name of the folder is not important since the OS name comes from the os.json file, Without that file, the OS will not even be shown. Please also see https://github.com/procount/pinn/blob/master/README_PINN.md#how-to-create-a-custom…