Skip to content

proficnc/The-Cube

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

The Cube Autopilot

Hardware

Website at: http://proficnc.com

The Cube BLACK uses some open hardware designs, the FMU board is a derivitive of the Pixhawk 2 design by ProfiCNC, and its schematic is published here. Each component in the cube has a seperate licence. please ensure you respect this licence, or the licence will automatically be revoked.

Pull requests for relevant fixes are very welcome. The cube licences...board files are NOT open. FMUv3 board CC-BY-SA 3.0 (Schematic ONLY, PCB is Copyright Philip Rowse, and must not be copied as is) IMUv3 board is copyright ProfiCNC CC-BY-NC 3.0 (NO COMMERCIAL USE WITHOUT CONSULTING Mr Philip Rowse) PSM board is copyright ProfiCNC CC-BY-NC 3.0 (No Commercial use without consulting mr Philip Rowse)

The Cube concept, an autopilot on module, and a carrier board are patented (US Patent No. 10,613,526). These are NOT to be coppied without permission from ProfiCNC. Permission is granted to use this pattern for anyone building a carrier board to suite either the ProfiCNC / Hex Cube, or the 3DR Pixhawk 2. No use for any other purpose is licenced.

Carrier board PCB Files shown for use as a template Footprint for the Cube is Patented, please contact ProfiCNC if you wish to use this footprint for your design, the use of this footprint for customized carrier boards will be granted free of charge, but we appreciate the official request, and you will be given a licence number for this.

Please Add your company name a link to where your design can be found (not mandatory)a description as to what your board is for, and take the next available serial number. here on github, and we will respond there.

https://github.com/proficnc/The-Cube/blob/master/CB_REV_C_Altium/Carrier%20board%20footprint%20approval

The Cube Black Hardware is the result of a collaboration of the PX4, Ardupilot community, 3D Robotics, ProfiCNC and Hex Technologies and has been designed in Altium. Pixhawk 2 FMUv3 is a derivitive of the Pixhawk 1, APM, PX4 project. The IMU is an original ProfiCNC work

Creative Commons License Disclaimer UNLESS OTHERWISE MUTUALLY AGREED TO BY THE PARTIES IN WRITING, LICENSOR OFFERS THE WORK AS-IS AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE WORK, EXPRESS, IMPLIED, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTIBILITY, FITNESS FOR A PARTICULAR PURPOSE, NONINFRINGEMENT, OR THE ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OF ABSENCE OF ERRORS, WHETHER OR NOT DISCOVERABLE. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO SUCH EXCLUSION MAY NOT APPLY TO YOU. EXCEPT TO THE EXTENT REQUIRED BY APPLICABLE LAW, IN NO EVENT WILL LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES ARISING OUT OF THIS LICENSE OR THE USE OF THE WORK, EVEN IF LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

http://creativecommons.org/licenses/by-sa/3.0/