[nrfconnect] Disable GPIO for MCUBoot (#24038)

Reduce the size of bootloader by disable GPIO on all boards
except nRF7002 DK. The latter needs GPIO because it uses
SPI flash.

By the way, remove broken links in READMEs.

Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>

Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>

examples/all-clusters-app/nrfconnect/README.md

@@ -34,7 +34,6 @@ platform, so only one protocol can be supported for a specific device.
 -   [Building](#building)
     -   [Removing build artifacts](#removing-build-artifacts)
     -   [Building with release configuration](#building-with-release-configuration)
-    -   [Building with low-power configuration](#building-with-low-power-configuration)
     -   [Building with Device Firmware Upgrade support](#building-with-device-firmware-upgrade-support)
 -   [Configuring the example](#configuring-the-example)
     -   [Example build types](#example-build-types)

examples/all-clusters-minimal-app/nrfconnect/README.md

@@ -31,7 +31,6 @@ device works as a Thread Minimal End Device.
 -   [Building](#building)
     -   [Removing build artifacts](#removing-build-artifacts)
     -   [Building with release configuration](#building-with-release-configuration)
-    -   [Building with low-power configuration](#building-with-low-power-configuration)
     -   [Building with Device Firmware Upgrade support](#building-with-device-firmware-upgrade-support)
 -   [Configuring the example](#configuring-the-example)
     -   [Example build types](#example-build-types)

examples/light-switch-app/nrfconnect/README.md

@@ -45,7 +45,6 @@ device.
 -   [Building](#building)
     -   [Removing build artifacts](#removing-build-artifacts)
     -   [Building with release configuration](#building-with-release-configuration)
-    -   [Building with low-power configuration](#building-with-low-power-configuration)
     -   [Building with Device Firmware Upgrade support](#building-with-device-firmware-upgrade-support)
 -   [Configuring the example](#configuring-the-example)
     -   [Example build types](#example-build-types)

examples/light-switch-app/nrfconnect/child_image/mcuboot/boards/nrf7002dk_nrf5340_cpuapp.conf

@@ -0,0 +1,17 @@
+#
+#    Copyright (c) 2022 Project CHIP Authors
+#
+#    Licensed under the Apache License, Version 2.0 (the "License");
+#    you may not use this file except in compliance with the License.
+#    You may obtain a copy of the License at
+#
+#        http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS,
+#    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#    See the License for the specific language governing permissions and
+#    limitations under the License.
+#
+
+CONFIG_GPIO=y

examples/light-switch-app/nrfconnect/child_image/mcuboot/boards/nrf7002dk_nrf5340_cpuapp_release.conf

@@ -0,0 +1,17 @@
+#
+#    Copyright (c) 2022 Project CHIP Authors
+#
+#    Licensed under the Apache License, Version 2.0 (the "License");
+#    you may not use this file except in compliance with the License.
+#    You may obtain a copy of the License at
+#
+#        http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS,
+#    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#    See the License for the specific language governing permissions and
+#    limitations under the License.
+#
+
+CONFIG_GPIO=y

examples/light-switch-app/nrfconnect/child_image/mcuboot/prj.conf

@@ -27,3 +27,4 @@ CONFIG_CONSOLE=n
 CONFIG_SERIAL=n
 CONFIG_UART_CONSOLE=n
 CONFIG_USE_SEGGER_RTT=n
+CONFIG_GPIO=n

examples/light-switch-app/nrfconnect/child_image/mcuboot/prj_release.conf

@@ -27,3 +27,4 @@ CONFIG_CONSOLE=n
 CONFIG_SERIAL=n
 CONFIG_UART_CONSOLE=n
 CONFIG_USE_SEGGER_RTT=n
+CONFIG_GPIO=n

examples/lighting-app/nrfconnect/child_image/mcuboot/boards/nrf7002dk_nrf5340_cpuapp.conf

@@ -0,0 +1,17 @@
+#
+#    Copyright (c) 2022 Project CHIP Authors
+#
+#    Licensed under the Apache License, Version 2.0 (the "License");
+#    you may not use this file except in compliance with the License.
+#    You may obtain a copy of the License at
+#
+#        http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS,
+#    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#    See the License for the specific language governing permissions and
+#    limitations under the License.
+#
+
+CONFIG_GPIO=y

examples/lighting-app/nrfconnect/child_image/mcuboot/boards/nrf7002dk_nrf5340_cpuapp_release.conf

@@ -0,0 +1,17 @@
+#
+#    Copyright (c) 2022 Project CHIP Authors
+#
+#    Licensed under the Apache License, Version 2.0 (the "License");
+#    you may not use this file except in compliance with the License.
+#    You may obtain a copy of the License at
+#
+#        http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS,
+#    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#    See the License for the specific language governing permissions and
+#    limitations under the License.
+#
+
+CONFIG_GPIO=y

examples/lighting-app/nrfconnect/child_image/mcuboot/prj.conf

@@ -27,3 +27,4 @@ CONFIG_CONSOLE=n
 CONFIG_SERIAL=n
 CONFIG_UART_CONSOLE=n
 CONFIG_USE_SEGGER_RTT=n
+CONFIG_GPIO=n

examples/lighting-app/nrfconnect/child_image/mcuboot/prj_release.conf

@@ -27,3 +27,4 @@ CONFIG_CONSOLE=n
 CONFIG_SERIAL=n
 CONFIG_UART_CONSOLE=n
 CONFIG_USE_SEGGER_RTT=n
+CONFIG_GPIO=n

examples/lock-app/nrfconnect/README.md

@@ -38,7 +38,6 @@ platform, so only one protocol can be supported for a specific lock device.
 -   [Building](#building)
     -   [Removing build artifacts](#removing-build-artifacts)
     -   [Building with release configuration](#building-with-release-configuration)
-    -   [Building with low-power configuration](#building-with-low-power-configuration)
     -   [Building with Device Firmware Upgrade support](#building-with-device-firmware-upgrade-support)
 -   [Configuring the example](#configuring-the-example)
     -   [Example build types](#example-build-types)

examples/lock-app/nrfconnect/child_image/mcuboot/boards/nrf7002dk_nrf5340_cpuapp.conf

@@ -0,0 +1,17 @@
+#
+#    Copyright (c) 2022 Project CHIP Authors
+#
+#    Licensed under the Apache License, Version 2.0 (the "License");
+#    you may not use this file except in compliance with the License.
+#    You may obtain a copy of the License at
+#
+#        http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS,
+#    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#    See the License for the specific language governing permissions and
+#    limitations under the License.
+#
+
+CONFIG_GPIO=y

examples/lock-app/nrfconnect/child_image/mcuboot/boards/nrf7002dk_nrf5340_cpuapp_release.conf

@@ -0,0 +1,17 @@
+#
+#    Copyright (c) 2022 Project CHIP Authors
+#
+#    Licensed under the Apache License, Version 2.0 (the "License");
+#    you may not use this file except in compliance with the License.
+#    You may obtain a copy of the License at
+#
+#        http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS,
+#    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#    See the License for the specific language governing permissions and
+#    limitations under the License.
+#
+
+CONFIG_GPIO=y

examples/lock-app/nrfconnect/child_image/mcuboot/prj.conf

@@ -27,3 +27,4 @@ CONFIG_CONSOLE=n
 CONFIG_SERIAL=n
 CONFIG_UART_CONSOLE=n
 CONFIG_USE_SEGGER_RTT=n
+CONFIG_GPIO=n

examples/lock-app/nrfconnect/child_image/mcuboot/prj_release.conf

@@ -27,3 +27,4 @@ CONFIG_CONSOLE=n
 CONFIG_SERIAL=n
 CONFIG_UART_CONSOLE=n
 CONFIG_USE_SEGGER_RTT=n
+CONFIG_GPIO=n

examples/window-app/nrfconnect/README.md

@@ -33,7 +33,6 @@ into an existing Matter network and can be controlled by this network.
 -   [Building](#building)
     -   [Removing build artifacts](#removing-build-artifacts)
     -   [Building with release configuration](#building-with-release-configuration)
-    -   [Building with low-power configuration](#building-with-low-power-configuration)
     -   [Building with Device Firmware Upgrade support](#building-with-device-firmware-upgrade-support)
 -   [Configuring the example](#configuring-the-example)
     -   [Example build types](#example-build-types)