Adding test scripts (YAMLs) for Laundry Dryer Mode

src/app/tests/suites/certification/PICS.yaml

@@ -8883,6 +8883,44 @@ PICS:
           "Does the device implement sending the ChangeToModeResponse command?"
       id: LWM.S.C01.Tx
 
+    #  Laundry DRYER Mode Cluster
+
+    - label: "Does the device implement the Dryer cluster as a server?"
+      id: DRYERCTRL.S
+
+    #- label: "Does the DUT support testing the failed ChangeToMode command?"
+    #  id: DRYERCTRL.S.M.CAN_TEST_MODE_FAILURE
+
+    #- label:
+    #      "Id of mode the device will fail to transition to, given its current
+    #      state"
+    #  id: PIXIT.DRYERCTRL.S.MODE_CHANGE_FAIL
+
+    #- label:
+    #      "Id of mode the device will successfully transition to, given its
+    #      current state"
+    #  id: PIXIT.DRYERCTRL.S.MODE_CHANGE_OK
+
+    #
+    # server / features
+    #
+    - label:
+          "Does the device support depending on an On/Off cluster implemented on
+          the same endpoint?"
+      id: DRYERCTRL.S.F00
+
+    #
+    # server / attributes
+    #
+    - label: "Does the device implement the SupportedModes attribute?"
+      id: DRYERCTRL.S.A0000
+
+    - label: "Does the device implement the CurrentMode attribute?"
+      id: DRYERCTRL.S.A0001
+
+    - label: "Can the device be controlled manually?"
+      id: DRYERCTRL.S.M.ManuallyControlled
+
     # RVC Clean Mode Cluster
 
     - label: "Does the device implement the RVCCLEANM cluster as a server?"

src/app/tests/suites/certification/Test_TC_DRYERCTRL_1_1.yaml

@@ -0,0 +1,91 @@
+# Copyright (c) 2023 Project CHIP Authors
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: 3.1.1. [TC-DRYERCTRL-1.1] Global attributes with server as DUT
+
+PICS:
+    - DRYERCTRL.S
+
+config:
+    nodeId: 0x12344321
+    cluster: "Laundry Dryer Controls"
+    endpoint: 1
+
+tests:
+    - label: "Step 1: Wait for the commissioned device to be retrieved"
+      cluster: "DelayCommands"
+      command: "WaitForCommissionee"
+      arguments:
+          values:
+              - name: "nodeId"
+                value: nodeId
+
+    - label: "Step2: TH reads from the DUT the ClusterRevision attribute."
+      command: "readAttribute"
+      attribute: "ClusterRevision"
+      response:
+          value: 1
+          constraints:
+              type: int16u
+
+    - label: "Step 3: TH reads from the DUT the FeatureMap attribute."
+      command: "readAttribute"
+      attribute: "FeatureMap"
+      response:
+          value: 0
+          constraints:
+              type: bitmap32
+
+    - label: "Step 4: TH reads from the DUT the AttributeList attribute."
+      PICS: PICS_EVENT_LIST_ENABLED
+      command: "readAttribute"
+      attribute: "AttributeList"
+      response:
+          constraints:
+              type: list
+              contains: [0, 1, 65528, 65529, 65530, 65531, 65532, 65533]
+
+    - label: "Step 4: TH reads from the DUT the AttributeList attribute."
+      PICS: "!PICS_EVENT_LIST_ENABLED"
+      command: "readAttribute"
+      attribute: "AttributeList"
+      response:
+          constraints:
+              type: list
+              contains: [0, 1, 65528, 65529, 65531, 65532, 65533]
+
+    - label: "Step 5: TH reads from the DUT the EventList attribute."
+      PICS: PICS_EVENT_LIST_ENABLED
+      command: "readAttribute"
+      attribute: "EventList"
+      response:
+          value: []
+          constraints:
+              type: list
+
+    - label: "Step 6: TH reads from the DUT the AcceptedCommandList attribute."
+      command: "readAttribute"
+      attribute: "AcceptedCommandList"
+      response:
+          value: []
+          constraints:
+              type: list
+
+    - label: "Step 7: TH reads from the DUT the GeneratedCommandList attribute."
+      command: "readAttribute"
+      attribute: "GeneratedCommandList"
+      response:
+          value: []
+          constraints:
+              type: list

src/app/tests/suites/certification/Test_TC_DRYERCTRL_2_1.yaml

@@ -0,0 +1,126 @@
+# Copyright (c) 2023 Project CHIP Authors
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: 3.2.1. [TC-DRYERCTRL-2.1]  Optional Dryness attributes with server as DUT
+
+PICS:
+    - DRYERCTRL.S
+
+config:
+    nodeId: 0x12344321
+    cluster: "Laundry Dryer Controls"
+    endpoint: 1
+
+    unsupportedSelectedDrynessLevel:
+        type: int8u
+        defaultValue: 4
+
+    SupportedDrynessLevel:
+        type: int8u
+        defaultValue: 1
+
+tests:
+    - label: "Step 1: Wait for the commissioned device to be retrieved"
+      cluster: "DelayCommands"
+      command: "WaitForCommissionee"
+      arguments:
+          values:
+              - name: "nodeId"
+                value: nodeId
+
+    - label:
+          "Step 2: TH reads from the DUT the mandatory attribute:
+          SupportedDrynessLevels"
+      PICS: DRYERCTRL.S.A0000
+      command: "readAttribute"
+      attribute: "SupportedDrynessLevels"
+      response:
+          constraints:
+              type: list
+              maxLength: 16
+
+    - label:
+          "Step 3: TH reads from the DUT the mandatory attribute:
+          SelectedDrynessLevel"
+      PICS: DRYERCTRL.S.A0001
+      command: "readAttribute"
+      attribute: "SelectedDrynessLevel"
+      response:
+          constraints:
+              type: enum8
+              minValue: 0
+              maxValue: 15
+
+    - label:
+          "Step 4:TH writes a supported SelectedDrynessLevel attribute that is
+          within the list of SupportedDrynessLevels"
+      PICS: DRYERCTRL.S.A0001
+      command: "writeAttribute"
+      attribute: "SelectedDrynessLevel"
+      arguments:
+          value: SupportedDrynessLevel
+
+    - label: "Wait 2 seconds"
+      cluster: "DelayCommands"
+      command: "WaitForMs"
+      arguments:
+          values:
+              - name: "ms"
+                value: 2000
+
+    - label:
+          "Step 5: after a few seconds, TH reads from the DUT the
+          SelectedDrynessLevel attribute"
+      PICS: DRYERCTRL.S.A0001
+      command: "readAttribute"
+      attribute: "SelectedDrynessLevel"
+      response:
+          value: SupportedDrynessLevel
+          constraints:
+              type: enum8
+
+    - label:
+          "Step 6: TH writes an unsupported SelectedDrynessLevel attribute that
+          is not in list of SupportedDrynessLevels to DUT"
+      PICS: DRYERCTRL.S.A0001
+      command: "writeAttribute"
+      attribute: "SelectedDrynessLevel"
+      arguments:
+          value: unsupportedSelectedDrynessLevel
+      response:
+          error: CONSTRAINT_ERROR
+
+    - label: "Step 6: Operate device to set the condition to read only"
+      verification: |
+          Manual operation required
+      cluster: "LogCommands"
+      command: "UserPrompt"
+      PICS: PICS_SKIP_SAMPLE_APP && DRYERCTRL.S.M.ManuallyControlled
+      arguments:
+          values:
+              - name: "message"
+                value: "Please enter 'y' for success"
+              - name: "expectedValue"
+                value: "y"
+
+    - label:
+          "Step 7: TH writes a supported SelectedDrynessLevel attribute to DUT
+          while DUT is not in a valid state."
+      PICS: DRYERCTRL.S.M.ManuallyControlled && DRYERCTRL.S.A0001
+      command: "writeAttribute"
+      attribute: "SelectedDrynessLevel"
+      arguments:
+          value: SupportedDrynessLevel
+      response:
+          error: INVALID_IN_STATE

src/app/tests/suites/certification/ci-pics-values

@@ -750,6 +750,22 @@ PIXIT.LWM.MODE_CHANGE_OK=1
 
 LWM.S.M.CAN_TEST_MODE_FAILURE=1
 
+
+# LAUNDRY DRYER MODE CLUSTER
+DRYERCTRL.S=1
+DRYERCTRL.S.A0000=1
+DRYERCTRL.S.A0001=1
+
+#Feature
+DRYERCTRL.S.F00=1
+
+#PIXIT
+#PIXIT.DRYERCTRL.S.MODE_CHANGE_FAIL=1
+#PIXIT.DRYERCTRL.S.MODE_CHANGE_OK=1
+
+#DRYERCTRL.S.M.CAN_TEST_MODE_FAILURE=1
+DRYERCTRL.S.M.ManuallyControlled=0
+
 # Time Format Localization Cluster
 LTIME.S=1
 LTIME.S.A0000=1

src/app/tests/suites/ciTests.json

@@ -119,6 +119,9 @@
         "Test_TC_WASHERCTRL_2_1",
         "Test_TC_WASHERCTRL_2_2"
     ],
+
+    "LaundryDryerControl": ["Test_TC_DRYERCTRL_1_1", "Test_TC_DRYERCTRL_2_1"],
+
     "MediaControl": [
         "Test_TC_LOWPOWER_1_1",
         "Test_TC_KEYPADINPUT_1_2",
@@ -398,6 +401,7 @@
         "TimeFormatLocalization",
         "LaundryWasherMode",
         "LaundryWasherControl",
+        "LaundryDryerControl",
         "MediaControl",
         "ModeSelect",
         "MultipleFabrics",

src/controller/python/chip/clusters/__init__.py

@@ -31,14 +31,14 @@
                       DoorLock, ElectricalMeasurement, EnergyEvse, EthernetNetworkDiagnostics, FanControl, FaultInjection,
                       FixedLabel, FlowMeasurement, FormaldehydeConcentrationMeasurement, GeneralCommissioning, GeneralDiagnostics,
                       GroupKeyManagement, Groups, HepaFilterMonitoring, IcdManagement, Identify, IlluminanceMeasurement,
-                      KeypadInput, LaundryWasherControls, LaundryWasherMode, LevelControl, LocalizationConfiguration, LowPower,
-                      MediaInput, MediaPlayback, ModeSelect, NetworkCommissioning, NitrogenDioxideConcentrationMeasurement,
-                      OccupancySensing, OnOff, OnOffSwitchConfiguration, OperationalCredentials, OperationalState,
-                      OtaSoftwareUpdateProvider, OtaSoftwareUpdateRequestor, OzoneConcentrationMeasurement,
-                      Pm1ConcentrationMeasurement, Pm10ConcentrationMeasurement, Pm25ConcentrationMeasurement, PowerSource,
-                      PowerSourceConfiguration, PressureMeasurement, ProxyConfiguration, ProxyDiscovery, ProxyValid,
-                      PulseWidthModulation, PumpConfigurationAndControl, RadonConcentrationMeasurement, RefrigeratorAlarm,
-                      RefrigeratorAndTemperatureControlledCabinetMode, RelativeHumidityMeasurement, RvcCleanMode,
+                      KeypadInput, LaundryDryerControls, LaundryWasherControls, LaundryWasherMode, LevelControl,
+                      LocalizationConfiguration, LowPower, MediaInput, MediaPlayback, ModeSelect, NetworkCommissioning,
+                      NitrogenDioxideConcentrationMeasurement, OccupancySensing, OnOff, OnOffSwitchConfiguration,
+                      OperationalCredentials, OperationalState, OtaSoftwareUpdateProvider, OtaSoftwareUpdateRequestor,
+                      OzoneConcentrationMeasurement, Pm1ConcentrationMeasurement, Pm10ConcentrationMeasurement,
+                      Pm25ConcentrationMeasurement, PowerSource, PowerSourceConfiguration, PressureMeasurement, ProxyConfiguration,
+                      ProxyDiscovery, ProxyValid, PulseWidthModulation, PumpConfigurationAndControl, RadonConcentrationMeasurement,
+                      RefrigeratorAlarm, RefrigeratorAndTemperatureControlledCabinetMode, RelativeHumidityMeasurement, RvcCleanMode,
                       RvcOperationalState, RvcRunMode, Scenes, SmokeCoAlarm, SoftwareDiagnostics, Switch, TargetNavigator,
                       TemperatureControl, TemperatureMeasurement, Thermostat, ThermostatUserInterfaceConfiguration,
                       ThreadNetworkDiagnostics, TimeFormatLocalization, TimeSynchronization,
@@ -53,7 +53,7 @@
            DoorLock, ElectricalMeasurement,  EnergyEvse, EthernetNetworkDiagnostics, FanControl, FaultInjection, FixedLabel, FlowMeasurement,
            FormaldehydeConcentrationMeasurement, GeneralCommissioning, GeneralDiagnostics, GroupKeyManagement, Groups,
            HepaFilterMonitoring, IcdManagement, Identify, IlluminanceMeasurement, KeypadInput,
-           LaundryWasherControls, LaundryWasherMode, LevelControl, LocalizationConfiguration, LowPower, MediaInput, MediaPlayback, ModeSelect,
+           LaundryWasherControls, LaundryDryerControls, LaundryWasherMode, LevelControl, LocalizationConfiguration, LowPower, MediaInput, MediaPlayback, ModeSelect,
            NetworkCommissioning, NitrogenDioxideConcentrationMeasurement,
            OccupancySensing, OnOff, OnOffSwitchConfiguration, OperationalCredentials, OperationalState,
            OtaSoftwareUpdateProvider, OtaSoftwareUpdateRequestor,