Remove dangling MCAD and InstaScale references

Cleanup a few MCAD/InstaScale references missed in c771aae.

CONTRIBUTING.md

@@ -14,15 +14,6 @@ The following should be installed in your working environment:
 ## Basic Overview
 The main entrypoint for the operator is `main.go`
 
-The MCAD and InstaScale custom resources are defined under the `api` dir:
- - See `mcad_types.go` and `instascale_types.go`
-
-The MCAD and InstaScale resource templates can be found under `config/internal`:
- - Sorted under `mcad` and `instascale` subdirs
-
-The code for MCAD/InstaScale resource reconcilliation can be found in the `controllers` dir:
- - See `mcad_controller.go` and `instascale_controller.go`
-
 ## Building and Deployment
 If changes are made in the `api` dir, run: `make manifests`
  - This will generate new CRDs and associated files
@@ -53,7 +44,6 @@ The CodeFlare Operator currently has unit tests and pre-commit checks
  - Note that both are required for CI to pass on pull requests
 
 To write and inspect unit tests:
- - MCAD and InstaScale unit tests under `mcad_controller_test.go` and `instascale_controller_test.go` in the `controllers` dir
  - Unit test functions are defined in `suite_test.go` (with utils in `util/util.go`) in the `controllers dir`
  - Test cases defined under `controllers/testdata`
 

README.md

@@ -1,6 +1,6 @@
 # codeflare-operator
 
-Operator for installation and lifecycle management of CodeFlare distributed workload stack, starting with MCAD and InstaScale
+Operator for installation and lifecycle management of CodeFlare distributed workload stack.
 
 <!-- Don't delete these comments, they are used to generate Compatibility Matrix table for release automation -->
 <!-- Compatibility Matrix start -->
@@ -9,9 +9,7 @@ CodeFlare Stack Compatibility Matrix
 | Component                    | Version                                                                                           |
 |------------------------------|---------------------------------------------------------------------------------------------------|
 | CodeFlare Operator           | [v1.3.1](https://github.com/project-codeflare/codeflare-operator/releases/tag/v1.3.1)             |
-| Multi-Cluster App Dispatcher | [v1.40.0](https://github.com/project-codeflare/multi-cluster-app-dispatcher/releases/tag/v1.40.0) |
 | CodeFlare-SDK                | [v0.15.1](https://github.com/project-codeflare/codeflare-sdk/releases/tag/v0.15.1)                  |
-| InstaScale                   | [v0.4.0](https://github.com/project-codeflare/instascale/releases/tag/v0.4.0)                     |
 | KubeRay                      | [v1.0.0](https://github.com/opendatahub-io/kuberay/releases/tag/v1.0.0)                              |
 <!-- Compatibility Matrix end -->
 
@@ -90,7 +88,7 @@ The e2e tests can be executed locally by running the following commands:
 
 To properly run e2e tests on disconnected cluster user has to provide additional environment variables to properly configure testing environment:
 
-- `CODEFLARE_TEST_PYTORCH_IMAGE` - image tag for image used to run training job using MCAD
+- `CODEFLARE_TEST_PYTORCH_IMAGE` - image tag for image used to run training job
 - `CODEFLARE_TEST_RAY_IMAGE` - image tag for Ray cluster image
 - `MNIST_DATASET_URL` - URL where MNIST dataset is available
 - `PIP_INDEX_URL` - URL where PyPI server with needed dependencies is running
@@ -118,8 +116,6 @@ For ODH tests additional environment variables are needed:
 There may be instances in which a new CodeFlare stack release requires releases of only a subset of the stack components. Examples could be hotfixes for a specific component. In these instances:
 
 1. Build updated components as needed:
-    - Build and release [MCAD](https://github.com/project-codeflare/multi-cluster-app-dispatcher)
-    - Build and release [InstaScale](https://github.com/project-codeflare/instascale)
     - Build and release [CodeFlare-SDK](https://github.com/project-codeflare/codeflare-sdk)
 
 2. Invoke [tag-and-build.yml](https://github.com/project-codeflare/codeflare-operator/actions/workflows/tag-and-build.yml) GitHub action, this action will create a repository tag, build and push operator image.

config/manifests/bases/codeflare-operator.clusterserviceversion.yaml

@@ -72,9 +72,7 @@ spec:
   keywords:
   - Pipelines
   - Scaling
-  - MCAD
   - App
-  - InstaScale
   - Jobs
   links:
   - name: Codeflare Operator

main.go

@@ -56,12 +56,10 @@ import (
 )
 
 var (
-	scheme            = runtime.NewScheme()
-	setupLog          = ctrl.Log.WithName("setup")
-	OperatorVersion   = "UNKNOWN"
-	McadVersion       = "UNKNOWN"
-	InstaScaleVersion = "UNKNOWN"
-	BuildDate         = "UNKNOWN"
+	scheme          = runtime.NewScheme()
+	setupLog        = ctrl.Log.WithName("setup")
+	OperatorVersion = "UNKNOWN"
+	BuildDate       = "UNKNOWN"
 )
 
 func init() {
@@ -90,8 +88,6 @@ func main() {
 
 	setupLog.Info("Build info",
 		"operatorVersion", OperatorVersion,
-		"mcadVersion", McadVersion,
-		"instaScaleVersion", InstaScaleVersion,
 		"date", BuildDate,
 	)