Help with "non-standard" TH05

[booroondook-eng]

I have very strange TH05. Its board looks exactly like TH-05F on these pictures:
https://pvvx.github.io/TH05F/img/TH05F_pcb1.jpg
and
https://pvvx.github.io/TH05F/img/TH05F_pcb2.jpg
And the board has the same mark as on photo - TH05Y_V1.1 2023-10-10 - and the same big chip - QD01/2332 NT/CJT 3180
But its display looks like TH-05_V1.4 as on this picture:
https://pvvx.github.io/TH-05/img/Box_sm.png
(The smiley has another form)

I tried to flash my device with TH-05F firmware but it does not work as a result.
Then I flashed it with TH-05 (without letter "F') firmware. And now my device works (it sends temperature and humidity values to my Home Assistant), but its display is off.

[pvvx]

Internal GPIO pinout:

Firmware	Sensor SDA/SCL/Power	LCD SDA/SCL/Power	Key	LED
THB1	P18/P20/-	P34/P33/-	P01	-
THB2	P18/P20/-	-	P07	P26
THB3	P18/P20/-	P34/P33/-	P01	-
BTH01	P33/P34/P00	-	P14	P15
TH05	P33/P34/P00	P33/P34/P02	P14	-
TH05D	P31/P32/-	P11/P14/-	P02	-
TH05F	P33/P34/P00	P26/P31/P02	P14	-

The LCD chip is initialized the same way in all variants, but the connection ports are different.
The LCD has different segment layouts depending on the model.
The sensors are detected automatically, but have different ports depending on the model.

[booroondook-eng]

I resolved the problem by flashing BOOT v1.7 and APP v1.9 (both for TH05F)

[pvvx]

Boot V1.9 works normally on TH05F. In previous versions there is an error if you assign another name to the device.