connections.ev3: Improve firmware update.

CHANGELOG.md

@@ -6,10 +6,15 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 
 ## [Unreleased]
 
+## [1.0.0-alpha.51] - 2024-11-01
+
 ### Added
 - Added `pybricksdev oad info` command.
 - Added `pybricksdev oad flash` command.
 
+### Fixed
+- Fixed EV3 firmware flashing on USB 3.0 systems.
+
 ## [1.0.0-alpha.50] - 2024-07-01
 
 ### Changed

pybricksdev/cli/flash.py

@@ -382,24 +382,28 @@ async def flash_ev3(firmware: bytes) -> None:
         fw, hw = await bootloader.get_version()
         print(f"hwid: {hw}")
 
-        ERASE_TICKS = 60
-
         # Erasing doesn't have any feedback so we just use time for the progress
         # bar. The operation runs on the EV3, so the time is the same for everyone.
         async def tick(callback):
-            for _ in range(ERASE_TICKS):
-                await asyncio.sleep(1)
-                callback(1)
+            CHUNK = 8000
+            SPEED = 256000
+            for _ in range(len(firmware) // CHUNK):
+                await asyncio.sleep(CHUNK / SPEED)
+                callback(CHUNK)
 
-        print("Erasing memory...")
-        with logging_redirect_tqdm(), tqdm(total=ERASE_TICKS) as pbar:
-            await asyncio.gather(bootloader.erase_chip(), tick(pbar.update))
+        print("Erasing memory and preparing firmware download...")
+        with logging_redirect_tqdm(), tqdm(
+            total=len(firmware), unit="B", unit_scale=True
+        ) as pbar:
+            await asyncio.gather(
+                bootloader.erase_and_begin_download(len(firmware)), tick(pbar.update)
+            )
 
         print("Downloading firmware...")
         with logging_redirect_tqdm(), tqdm(
             total=len(firmware), unit="B", unit_scale=True
         ) as pbar:
-            await bootloader.download(0, firmware, pbar.update)
+            await bootloader.download(firmware, pbar.update)
 
         print("Verifying...", end="", flush=True)
         checksum = await bootloader.get_checksum(0, len(firmware))

pybricksdev/connections/ev3.py

@@ -106,13 +106,20 @@ def _send_command(self, command: Command, payload: Optional[bytes] = None) -> in
 
         return message_number
 
-    def _receive_reply(self, command: Command, message_number: int) -> bytes:
+    def _receive_reply(
+        self, command: Command, message_number: int, force_length: int = 0
+    ) -> bytes:
         """
         Receive a reply from the EV3 bootloader.
 
         Args:
             command: The command that was sent.
             message_number: The return value of :meth:`_send_command`.
+            force_length: Expected length, used only when it fails to unpack
+                          normally. Some replies on USB 3.0 hosts contain
+                          the original command written over the reply. This
+                          means the header is bad, but the payload may be in
+                          tact if you know what data to expect.
 
         Returns:
             The payload of the reply.
@@ -131,36 +138,41 @@ def _receive_reply(self, command: Command, message_number: int) -> bytes:
             raise ReplyError(status)
 
         if message_type != MessageType.SYSTEM_REPLY:
-            raise RuntimeError("unexpected message type: {message_type}")
+            if force_length:
+                return reply[7 : force_length + 2]
+            raise RuntimeError(f"unexpected message type: {message_type}")
 
         if reply_command != command:
-            raise RuntimeError("command mismatch: {reply_command} != {command}")
+            raise RuntimeError(f"command mismatch: {reply_command} != {command}")
 
         return reply[7 : length + 2]
 
     def download_sync(
         self,
-        address: int,
         data: bytes,
         progress: Optional[Callable[[int], None]] = None,
     ) -> None:
         """
         Blocking version of :meth:`download`.
         """
-        param_data = struct.pack("<II", address, len(data))
-        num = self._send_command(Command.BEGIN_DOWNLOAD, param_data)
-        self._receive_reply(Command.BEGIN_DOWNLOAD, num)
 
+        completed = 0
         for c in chunk(data, self._MAX_DATA_SIZE):
             num = self._send_command(Command.DOWNLOAD_DATA, c)
-            self._receive_reply(Command.DOWNLOAD_DATA, num)
+            try:
+                completed += len(c)
+                self._receive_reply(Command.DOWNLOAD_DATA, num)
+            except RuntimeError as e:
+                # Allow exception only on the final chunk.
+                if completed != len(data):
+                    raise e
+                print(e, ". Proceeding anyway.")
 
             if progress:
                 progress(len(c))
 
     async def download(
         self,
-        address: int,
         data: bytes,
         progress: Optional[Callable[[int], None]] = None,
     ) -> None:
@@ -170,30 +182,31 @@ async def download(
         This operation takes about 60 seconds for a full 16MB firmware file.
 
         Args:
-            address: The starting address of where to write the data.
             data: The data to write.
             progress: Optional callback for indicating progress.
         """
         return await asyncio.get_running_loop().run_in_executor(
-            None, self.download_sync, address, data, progress
+            None, self.download_sync, data, progress
         )
 
-    def erase_chip_sync(self) -> None:
+    def erase_and_begin_download_sync(self, size) -> None:
         """
-        Blocking version of :meth:`erase_chip`.
+        Blocking version of :meth:`erase_and_begin_download`.
         """
-        num = self._send_command(Command.CHIP_ERASE)
-        self._receive_reply(Command.CHIP_ERASE, num)
+        param_data = struct.pack("<II", 0, size)
+        num = self._send_command(Command.BEGIN_DOWNLOAD_WITH_ERASE, param_data)
+        self._receive_reply(Command.BEGIN_DOWNLOAD_WITH_ERASE, num)
 
-    async def erase_chip(self) -> None:
+    async def erase_and_begin_download(self, size) -> None:
         """
-        Erases the external flash memory chip.
+        Erases the external flash memory chip by the amount required to
+        flash the new firmware. Also prepares firmware download.
 
-        This operation takes about 60 seconds.
+        Args:
+            size: How much to erase.
         """
         return await asyncio.get_running_loop().run_in_executor(
-            None,
-            self.erase_chip_sync,
+            None, self.erase_and_begin_download_sync, size
         )
 
     def start_app_sync(self) -> None:
@@ -241,7 +254,12 @@ def get_version_sync(self) -> Tuple[int, int]:
         Blocking version of :meth:`get_version`.
         """
         num = self._send_command(Command.GET_VERSION)
-        payload = self._receive_reply(Command.GET_VERSION, num)
+        # On certain USB 3.0 systems, the brick reply contains the command
+        # we just sent written over it. This means we don't get the correct
+        # header and length info. Since the command here is smaller than the
+        # reply, the paypload does not get overwritten, so we can still get
+        # the version info since we know the expected reply size.
+        payload = self._receive_reply(Command.GET_VERSION, num, force_length=13)
         return struct.unpack("<II", payload)
 
     async def get_version(self) -> Tuple[int, int]: