Skip to content
/ chubby75 Public

Linsn RV901T HUB75 LED "Receiver Card" Reverse Engineering

License

Notifications You must be signed in to change notification settings

q3k/chubby75

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

RV901T and ColorLight 5A-75B LED Receiver Cards

This repository contains reverse engineering information about the following boards:

  • Linsn RV901T HUB75 LED driver card (which uses a Spartan 6 LX16 FPGA)
  • ColorLight 5A-75B V6.1 and V7.0 (which use a Lattice ECP5-25 FPGA)

These are known as a "Receiver Card". Its stock function is to receive and forward framebuffer data using a proprietary protocol (from a "Sender Card") and blit out control signals to LED panels (via shields, like a HUB75 shield).

Chubby75 is a project to reverse engineer, document and provide tools for these cards.

Colorlight 5A-75B

This is a very interesting card because bitstreams for its Lattice ECP5-25 FPGA can be generated entirely with an open source tool chain (Yosys for synthesis, NextPNR for Place & Route, Project Trellis for bitstream handling.)

This board is supported by the visual editor for open FPGA boards IceStudio thanks to benitoss.

You can find information about it here.

5A-75B V6.1 Front View

Colorlight 5A-75E

This board is almost identical to Colorlight 5A-75B, but has twice as many HUB75 ports.

This board is supported by the visual editor for open FPGA boards IceStudio thanks to benitoss.

You can find information about it here.

5A-75E V7.1 Front View

RV901T LED

RV901T Front View

You can find information about it here.

As it contains a user-reprogrammable Spartan 6 FPGA (LX16, 14k 'logic cells', 9112 LUTs) and 2x GbE, it has potential to be usable as a general purpose FPGA development board, an interface card for various purposes, or a logic analyzer.

RV908 - Not Supported

There are RV908 boards which are an RV901T with the HUB75 daughter board integrated.

At least 2 versions are known to exist: RV908M32 and RV908T. The RV908T is likely a cost reduction of the RV908M32.

The RV908M32 has JTAG testpoints that are similar to the RV901T (which requires some scraping of silk screen and soldering work to get access.) The RV908T has no known JTAG testpoints at all.

See issue #20 for some discussion about these 2 boards.

It's hard to distinguish between the 2 boards or even specify with one to buy, so no further effort has been made to document reverse engineering details in this project.

License

CC0 - to the extent possible under law, the person who associated CC0 with this work has waived all copyright and related or neighboring rights to this work.

About

Linsn RV901T HUB75 LED "Receiver Card" Reverse Engineering

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published