-
-
Notifications
You must be signed in to change notification settings - Fork 39.8k
Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
- Loading branch information
Showing
42 changed files
with
2,140 additions
and
1 deletion.
There are no files selected for viewing
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,74 @@ | ||
// Copyright 2018-2022 Nick Brassel (@tzarc) | ||
// SPDX-License-Identifier: GPL-2.0-or-later | ||
#pragma once | ||
#include "config_common.h" | ||
|
||
// Encoders -- right-side is reversed | ||
#define ENCODERS_PAD_A \ | ||
{ C14 } | ||
#define ENCODERS_PAD_B \ | ||
{ C15 } | ||
#define ENCODERS_PAD_A_RIGHT \ | ||
{ C15 } | ||
#define ENCODERS_PAD_B_RIGHT \ | ||
{ C14 } | ||
|
||
#ifndef ENCODER_RESOLUTION | ||
# define ENCODER_RESOLUTION 2 | ||
#endif // ENCODER_RESOLUTION | ||
|
||
// Bootloader | ||
#define STM32_BOOTLOADER_DUAL_BANK TRUE | ||
#define STM32_BOOTLOADER_DUAL_BANK_GPIO B7 | ||
|
||
// Peripheral power control pins | ||
#define LCD_POWER_ENABLE_PIN A6 | ||
|
||
// Split configuration | ||
#define SPLIT_TRANSACTION_IDS_KB RPC_ID_SYNC_STATE_KB | ||
#define SPLIT_TRANSPORT_MIRROR | ||
#define SPLIT_LAYER_STATE_ENABLE | ||
#define SPLIT_LED_STATE_ENABLE | ||
#define SPLIT_MODS_ENABLE | ||
#define SPLIT_WPM_ENABLE | ||
|
||
// SPI Configuration | ||
#define SPI_DRIVER SPID3 | ||
#define SPI_SCK_PIN C10 | ||
#define SPI_SCK_PAL_MODE 6 | ||
#define SPI_MOSI_PIN C12 | ||
#define SPI_MOSI_PAL_MODE 6 | ||
#define SPI_MISO_PIN C11 | ||
#define SPI_MISO_PAL_MODE 6 | ||
|
||
// LCD Configuration | ||
#define LCD_RST_PIN B3 | ||
#define LCD_CS_PIN D2 | ||
#define LCD_DC_PIN A15 | ||
#ifndef LCD_ACTIVITY_TIMEOUT | ||
# define LCD_ACTIVITY_TIMEOUT 30000 | ||
#endif // LCD_ACTIVITY_TIMEOUT | ||
|
||
// Backlight driver (to control LCD backlight) | ||
#define BACKLIGHT_LEVELS 4 | ||
#define BACKLIGHT_PWM_DRIVER PWMD17 | ||
#define BACKLIGHT_PWM_CHANNEL 1 | ||
#define BACKLIGHT_PAL_MODE 1 | ||
|
||
// RGB configuration | ||
#define RGB_DI_PIN B2 | ||
#define WS2812_EXTERNAL_PULLUP | ||
#define WS2812_PWM_DRIVER PWMD20 | ||
#define WS2812_PWM_CHANNEL 1 | ||
#define WS2812_PWM_PAL_MODE 3 | ||
#define WS2812_DMA_STREAM STM32_DMA1_STREAM1 | ||
#define WS2812_DMA_CHANNEL 1 | ||
#define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM20_UP | ||
|
||
// Audio configuration | ||
#define AUDIO_PIN A5 | ||
#define AUDIO_PIN_ALT A4 | ||
#define AUDIO_PIN_ALT_AS_NEGATIVE | ||
#ifndef STARTUP_SONG | ||
# define STARTUP_SONG SONG(STARTUP_SOUND) | ||
#endif // STARTUP_SONG |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,199 @@ | ||
// Copyright 2018-2022 Nick Brassel (@tzarc) | ||
// SPDX-License-Identifier: GPL-2.0-or-later | ||
#include <string.h> | ||
#include "quantum.h" | ||
#include <hal_pal.h> | ||
#include "djinn.h" | ||
#include "serial.h" | ||
#include "split_util.h" | ||
#include "qp.h" | ||
|
||
painter_device_t lcd; | ||
|
||
// clang-format off | ||
#ifdef SWAP_HANDS_ENABLE | ||
const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { | ||
{ { 6, 6 }, { 5, 6 }, { 4, 6 }, { 3, 6 }, { 2, 6 }, { 1, 6 }, { 0, 6 } }, | ||
{ { 6, 7 }, { 5, 7 }, { 4, 7 }, { 3, 7 }, { 2, 7 }, { 1, 7 }, { 0, 7 } }, | ||
{ { 6, 8 }, { 5, 8 }, { 4, 8 }, { 3, 8 }, { 2, 8 }, { 1, 8 }, { 0, 8 } }, | ||
{ { 6, 9 }, { 5, 9 }, { 4, 9 }, { 3, 9 }, { 2, 9 }, { 1, 9 }, { 0, 9 } }, | ||
{ { 0, 0 }, { 0, 0 }, { 0, 0 }, { 6, 10 }, { 5, 10 }, { 4, 10 }, { 3, 10 } }, | ||
{ { 0, 0 }, { 6, 11 }, { 5, 11 }, { 4, 11 }, { 3, 11 }, { 2, 11 }, { 1, 11 } }, | ||
|
||
{ { 6, 0 }, { 5, 0 }, { 4, 0 }, { 3, 0 }, { 2, 0 }, { 1, 0 }, { 0, 0 } }, | ||
{ { 6, 1 }, { 5, 1 }, { 4, 1 }, { 3, 1 }, { 2, 1 }, { 1, 1 }, { 0, 1 } }, | ||
{ { 6, 2 }, { 5, 2 }, { 4, 2 }, { 3, 2 }, { 2, 2 }, { 1, 2 }, { 0, 2 } }, | ||
{ { 6, 3 }, { 5, 3 }, { 4, 3 }, { 3, 3 }, { 2, 3 }, { 1, 3 }, { 0, 3 } }, | ||
{ { 0, 0 }, { 0, 0 }, { 0, 0 }, { 6, 4 }, { 5, 4 }, { 4, 4 }, { 3, 4 } }, | ||
{ { 0, 0 }, { 6, 5 }, { 5, 5 }, { 4, 5 }, { 3, 5 }, { 2, 5 }, { 1, 5 } }, | ||
}; | ||
# ifdef ENCODER_MAP_ENABLE | ||
const uint8_t PROGMEM encoder_hand_swap_config[NUM_ENCODERS] = { 1, 0 }; | ||
# endif // ENCODER_MAP_ENABLE | ||
#endif // SWAP_HANDS_ENABLE | ||
// clang-format on | ||
|
||
void board_init(void) { | ||
usbpd_init(); | ||
} | ||
|
||
//---------------------------------------------------------- | ||
// Initialisation | ||
|
||
void keyboard_post_init_kb(void) { | ||
// Register keyboard state sync split transaction | ||
transaction_register_rpc(RPC_ID_SYNC_STATE_KB, kb_state_sync_slave); | ||
|
||
// Reset the initial shared data value between master and slave | ||
memset(&kb_state, 0, sizeof(kb_state)); | ||
|
||
// Turn off increased current limits | ||
setPinOutput(RGB_CURR_1500mA_OK_PIN); | ||
writePinLow(RGB_CURR_1500mA_OK_PIN); | ||
setPinOutput(RGB_CURR_3000mA_OK_PIN); | ||
writePinLow(RGB_CURR_3000mA_OK_PIN); | ||
|
||
// Turn on the RGB | ||
setPinOutput(RGB_POWER_ENABLE_PIN); | ||
writePinHigh(RGB_POWER_ENABLE_PIN); | ||
|
||
#ifdef EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN | ||
setPinOutput(EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN); | ||
writePinHigh(EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN); | ||
#endif // EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN | ||
|
||
// Turn on the LCD | ||
setPinOutput(LCD_POWER_ENABLE_PIN); | ||
writePinHigh(LCD_POWER_ENABLE_PIN); | ||
|
||
// Let the LCD get some power... | ||
wait_ms(150); | ||
|
||
// Initialise the LCD | ||
lcd = qp_ili9341_make_spi_device(320, 240, LCD_CS_PIN, LCD_DC_PIN, LCD_RST_PIN, 4, 3); | ||
qp_init(lcd, QP_ROTATION_0); | ||
|
||
// Turn on the LCD and clear the display | ||
kb_state.lcd_power = 1; | ||
qp_power(lcd, true); | ||
qp_rect(lcd, 0, 0, 239, 319, HSV_BLACK, true); | ||
|
||
// Turn on the LCD backlight | ||
backlight_enable(); | ||
backlight_level(BACKLIGHT_LEVELS); | ||
|
||
// Allow for user post-init | ||
keyboard_post_init_user(); | ||
} | ||
|
||
//---------------------------------------------------------- | ||
// RGB brightness scaling dependent on USBPD state | ||
|
||
#if defined(RGB_MATRIX_ENABLE) | ||
RGB rgb_matrix_hsv_to_rgb(HSV hsv) { | ||
float scale; | ||
switch (kb_state.current_setting) { | ||
default: | ||
case USBPD_500MA: | ||
scale = 0.35f; | ||
break; | ||
case USBPD_1500MA: | ||
scale = 0.75f; | ||
break; | ||
case USBPD_3000MA: | ||
scale = 1.0f; | ||
break; | ||
} | ||
|
||
hsv.v = (uint8_t)(hsv.v * scale); | ||
return hsv_to_rgb(hsv); | ||
} | ||
#endif | ||
|
||
//---------------------------------------------------------- | ||
// UI Placeholder, implemented in themes | ||
|
||
__attribute__((weak)) void draw_ui_user(void) {} | ||
|
||
//---------------------------------------------------------- | ||
// Housekeeping | ||
|
||
void housekeeping_task_kb(void) { | ||
// Update kb_state so we can send to slave | ||
kb_state_update(); | ||
|
||
// Data sync from master to slave | ||
kb_state_sync(); | ||
|
||
// Work out if we've changed our current limit, update the limiter circuit switches | ||
static uint8_t current_setting = USBPD_500MA; | ||
if (current_setting != kb_state.current_setting) { | ||
current_setting = kb_state.current_setting; | ||
switch (current_setting) { | ||
default: | ||
case USBPD_500MA: | ||
writePinLow(RGB_CURR_1500mA_OK_PIN); | ||
writePinLow(RGB_CURR_3000mA_OK_PIN); | ||
break; | ||
case USBPD_1500MA: | ||
writePinHigh(RGB_CURR_1500mA_OK_PIN); | ||
writePinLow(RGB_CURR_3000mA_OK_PIN); | ||
break; | ||
case USBPD_3000MA: | ||
writePinHigh(RGB_CURR_1500mA_OK_PIN); | ||
writePinHigh(RGB_CURR_3000mA_OK_PIN); | ||
break; | ||
} | ||
|
||
// If we've changed the current limit, toggle rgb off and on if it was on, to force a brightness update on all LEDs | ||
if (is_keyboard_master() && rgb_matrix_is_enabled()) { | ||
rgb_matrix_disable_noeeprom(); | ||
rgb_matrix_enable_noeeprom(); | ||
} | ||
} | ||
|
||
// Turn on/off the LCD | ||
static bool lcd_on = false; | ||
if (lcd_on != (bool)kb_state.lcd_power) { | ||
lcd_on = (bool)kb_state.lcd_power; | ||
qp_power(lcd, lcd_on); | ||
} | ||
|
||
// Enable/disable RGB | ||
if (lcd_on) { | ||
// Turn on RGB | ||
writePinHigh(RGB_POWER_ENABLE_PIN); | ||
// Modify the RGB state if different to the LCD state | ||
if (rgb_matrix_is_enabled() != lcd_on) { | ||
// Wait for a small amount of time to allow the RGB capacitors to charge, before enabling RGB output | ||
wait_ms(10); | ||
// Enable RGB | ||
rgb_matrix_enable_noeeprom(); | ||
} | ||
} else { | ||
// Turn off RGB | ||
writePinLow(RGB_POWER_ENABLE_PIN); | ||
// Disable the PWM output for the RGB | ||
if (rgb_matrix_is_enabled() != lcd_on) { | ||
rgb_matrix_disable_noeeprom(); | ||
} | ||
} | ||
|
||
// Match the backlight to the LCD state | ||
if (is_keyboard_master() && is_backlight_enabled() != lcd_on) { | ||
if (lcd_on) | ||
backlight_enable(); | ||
else | ||
backlight_disable(); | ||
} | ||
|
||
// Draw the UI | ||
if (kb_state.lcd_power) { | ||
draw_ui_user(); | ||
} | ||
|
||
// Go into low-scan interrupt-based mode if we haven't had any matrix activity in the last 250 milliseconds | ||
if (last_input_activity_elapsed() > 250) { | ||
matrix_wait_for_interrupt(); | ||
} | ||
} |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,32 @@ | ||
// Copyright 2018-2022 Nick Brassel (@tzarc) | ||
// SPDX-License-Identifier: GPL-2.0-or-later | ||
#pragma once | ||
#include "quantum.h" | ||
#include "qp.h" | ||
|
||
//---------------------------------------------------------- | ||
// General stuff | ||
|
||
extern painter_device_t lcd; | ||
|
||
void matrix_wait_for_interrupt(void); | ||
|
||
void usbpd_update(void); | ||
const char* usbpd_str(usbpd_allowance_t allowance); | ||
|
||
//---------------------------------------------------------- | ||
// Runtime data sync -- keyboard | ||
|
||
#pragma pack(push) | ||
#pragma pack(1) | ||
typedef struct kb_runtime_config { | ||
unsigned lcd_power : 1; | ||
usbpd_allowance_t current_setting : 2; | ||
} kb_runtime_config; | ||
#pragma pack(pop) | ||
|
||
extern kb_runtime_config kb_state; | ||
|
||
void kb_state_update(void); | ||
void kb_state_sync(void); | ||
void kb_state_sync_slave(uint8_t m2s_size, const void* m2s_buffer, uint8_t s2m_size, void* s2m_buffer); |
Oops, something went wrong.