Add keyboard leftover30

keyboards/marksard/leftover30/config.h

@@ -0,0 +1,138 @@
+/*
+Copyright 2020 marksard
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0xDFA8
+#define DEVICE_VER 0x0001
+#define MANUFACTURER marksard
+#define PRODUCT leftover30
+
+/* Encoder */
+#define ENCODERS_PAD_A { F4 }
+#define ENCODERS_PAD_B { F5 }
+// #define ENCODER_DIRECTION_FLIP
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 5
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B6, B2, F7, F6, B3, B1, D4, D0 }
+#define MATRIX_COL_PINS { B5, B4, E6, D7, C6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+#define RGB_DI_PIN D3
+#ifdef RGB_DI_PIN
+  #define RGBLED_NUM 6
+  #define RGBLIGHT_HUE_STEP 8
+  #define RGBLIGHT_SAT_STEP 8
+  #define RGBLIGHT_VAL_STEP 8
+  #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+  #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+  #define RGBLIGHT_ANIMATIONS
+/*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+/*== customize breathing effect ==*/
+  /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+  #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+  /*==== use exp() and sin() ====*/
+  #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+  #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION

keyboards/marksard/leftover30/info.json

@@ -0,0 +1,198 @@
+{
+    "keyboard_name": "Leftover30",
+    "url": "https://github.com/marksard/Keyboards",
+    "maintainer": "marksard",
+    "width": 11.5,
+    "height": 4,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {
+                    "label": "Q",
+                    "x": 0.5,
+                    "y": 0
+                },
+                {
+                    "label": "W",
+                    "x": 1.5,
+                    "y": 0
+                },
+                {
+                    "label": "E",
+                    "x": 2.5,
+                    "y": 0
+                },
+                {
+                    "label": "R",
+                    "x": 3.5,
+                    "y": 0
+                },
+                {
+                    "label": "T",
+                    "x": 4.5,
+                    "y": 0
+                },
+                {
+                    "label": "Y",
+                    "x": 5.5,
+                    "y": 0
+                },
+                {
+                    "label": "U",
+                    "x": 6.5,
+                    "y": 0
+                },
+                {
+                    "label": "I",
+                    "x": 7.5,
+                    "y": 0
+                },
+                {
+                    "label": "O",
+                    "x": 8.5,
+                    "y": 0
+                },
+                {
+                    "label": "P",
+                    "x": 9.5,
+                    "y": 0
+                },
+                {
+                    "label": "BS",
+                    "x": 10.5,
+                    "y": 0
+                },
+                {
+                    "label": "A",
+                    "x": 0.75,
+                    "y": 1
+                },
+                {
+                    "label": "S",
+                    "x": 1.75,
+                    "y": 1
+                },
+                {
+                    "label": "D",
+                    "x": 2.75,
+                    "y": 1
+                },
+                {
+                    "label": "F",
+                    "x": 3.75,
+                    "y": 1
+                },
+                {
+                    "label": "G",
+                    "x": 4.75,
+                    "y": 1
+                },
+                {
+                    "label": "H",
+                    "x": 5.75,
+                    "y": 1
+                },
+                {
+                    "label": "J",
+                    "x": 6.75,
+                    "y": 1
+                },
+                {
+                    "label": "K",
+                    "x": 7.75,
+                    "y": 1
+                },
+                {
+                    "label": "L",
+                    "x": 8.75,
+                    "y": 1
+                },
+                {
+                    "label": "Enter",
+                    "x": 9.75,
+                    "y": 1,
+                    "w": 1.75
+                },
+                {
+                    "label": "Z",
+                    "x": 1.25,
+                    "y": 2
+                },
+                {
+                    "label": "X",
+                    "x": 2.25,
+                    "y": 2
+                },
+                {
+                    "label": "C",
+                    "x": 3.25,
+                    "y": 2
+                },
+                {
+                    "label": "V",
+                    "x": 4.25,
+                    "y": 2
+                },
+                {
+                    "label": "B",
+                    "x": 5.25,
+                    "y": 2
+                },
+                {
+                    "label": "N",
+                    "x": 6.25,
+                    "y": 2
+                },
+                {
+                    "label": "M",
+                    "x": 7.25,
+                    "y": 2
+                },
+                {
+                    "label": "<",
+                    "x": 8.25,
+                    "y": 2
+                },
+                {
+                    "label": ">",
+                    "x": 9.25,
+                    "y": 2
+                },
+                {
+                    "label": "?",
+                    "x": 10.25,
+                    "y": 2,
+                    "w": 1.25
+                },
+                {
+                    "label": "",
+                    "x": 0,
+                    "y": 3
+                },
+                {
+                    "label": "Alt",
+                    "x": 1.5,
+                    "y": 3,
+                    "w": 1.25
+                },
+                {
+                    "label": "",
+                    "x": 2.75,
+                    "y": 3,
+                    "w": 6.25
+                },
+                {
+                    "label": "Fn1",
+                    "x": 9,
+                    "y": 3
+                },
+                {
+                    "label": "Ctrl",
+                    "x": 10,
+                    "y": 3,
+                    "w": 1.5
+                }
+            ]
+        }
+    }
+}

keyboards/marksard/leftover30/keymaps/default/config.h

@@ -0,0 +1,24 @@
+/* Copyright 2020 marksard
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here
+#define TAPPING_TERM 200
+#define IGNORE_MOD_TAP_INTERRUPT
+
+#define TAPPING_LAYER_TERM 150 // Custom LT Tapping term
+#define TAPPING_TERM_PER_KEY