Add 2key2crawl

keyboards/2key2crawl/2key2crawl.c

@@ -0,0 +1 @@
+#include "2key2crawl.h"

keyboards/2key2crawl/2key2crawl.h

@@ -0,0 +1,12 @@
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+	K00, K01, K02, K03, K15, \
+	K10, K11, K12, K13, K14, K16  \
+) { \
+	{ K00,   K01,   K02,   K03,  KC_NO, KC_NO, KC_NO }, \
+	{ K10,   K11,   K12,   K13,  K14,   K15,   K16 },  \
+}
+

keyboards/2key2crawl/config.h

@@ -0,0 +1,44 @@
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6090
+#define DEVICE_VER      0x0002
+#define MANUFACTURER    WoodKeys.click
+#define PRODUCT         2Key2Crawl
+#define DESCRIPTION     ATX Keycrawl 2018
+
+/* key matrix size */
+#define MATRIX_ROWS 2
+#define MATRIX_COLS 7
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { C4, C5 }
+#define MATRIX_COL_PINS { B3, B4, B5, B6, B7, C7, B2 }
+#define UNUSED_PINS
+
+
+#define ENCODERS_PAD_A { D0 }
+#define ENCODERS_PAD_B { D1 }
+#define ENCODER_RESOLUTION 1
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+
+#ifdef RGBLIGHT_ENABLE
+#define RGB_DI_PIN C6
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 3
+#endif

keyboards/2key2crawl/keymaps/default/keymap.c

@@ -0,0 +1,28 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+LAYOUT(
+    KC_1, KC_2, KC_3, KC_4, KC_5,
+    KC_6, KC_7, KC_8, KC_9, KC_0, KC_ENTER),
+
+};
+
+void matrix_init_user(void) {
+  debug_config.matrix = 1;
+  debug_config.keyboard = 1;
+  debug_config.enable = 1;
+}
+
+
+
+void encoder_update_user(int8_t index, bool clockwise) {
+  if (index == 0) {
+    if (clockwise) {
+      tap_code(KC_PGUP);
+    } else {
+      tap_code(KC_PGDN);
+    }
+  }
+}
+

keyboards/2key2crawl/keymaps/tabs/keymap.c

@@ -0,0 +1,26 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+LAYOUT(
+    KC_1, KC_2, KC_3, KC_4, KC_5,
+    KC_6, KC_7, KC_8, KC_9, KC_0, KC_ENTER),
+
+};
+
+void matrix_init_user(void) {
+  debug_config.matrix = 1;
+  debug_config.keyboard = 1;
+  debug_config.enable = 1;
+}
+
+void encoder_update_user(int8_t index, bool clockwise) {
+  if (index == 0) {
+    if (clockwise) {
+      tap_code16(C(KC_T));
+    } else {
+      tap_code16(C(KC_W));
+    }
+  }
+}
+

keyboards/2key2crawl/keymaps/vol/keymap.c

@@ -0,0 +1,25 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+LAYOUT(
+    KC_1, KC_2, KC_3, KC_4, KC_5,
+    KC_6, KC_7, KC_8, KC_9, KC_0, KC_ENTER),
+
+};
+
+void matrix_init_user(void) {
+  debug_config.matrix = 1;
+  debug_config.keyboard = 1;
+  debug_config.enable = 1;
+}
+
+void encoder_update_user(int8_t index, bool clockwise) {
+  if (index == 0) {
+    if (clockwise) {
+     tap_code(KC_VOLU);
+    } else {
+      tap_code(KC_VOLD);
+    }
+  }
+}

keyboards/2key2crawl/readme.md

@@ -0,0 +1,16 @@
+# 2Key2CrawlPad
+
+![2Key2CrawlPad](https://i.imgur.com/ON7m7RI.jpg)
+
+A 2x5 macropad/numpad with a rotary encoder, exclusively available at Austin Keycrawl 2018 (12-01-2018).
+
+Keyboard Maintainer: QMK Community  
+Keyboard Designer: [Cole Markham](https://github.com/colemarkham)  
+Hardware Supported: Crawlpad  
+Hardware Availability: Exclusive to Keycrawl events, contact [awwwwwwyeaahhhhhh](https://www.reddit.com/user/awwwwwwyeaahhhhhh) for more details.
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 2key2crawl:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/2key2crawl/rules.mk

@@ -0,0 +1,29 @@
+# MCU name
+MCU = atmega32u2
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = lite	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = no	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = no		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no  # [Crawlpad] Custom backlighting code is used, so this should not be enabled
+AUDIO_ENABLE = no # [Crawlpad] This can be enabled if a speaker is connected to the expansion port. Not compatible with RGBLIGHT below
+RGBLIGHT_ENABLE = no # [Crawlpad] This can be enabled if a ws2812 strip is connected to the expansion port.
+ENCODER_ENABLE = yes # [2Key2crawl] Make the knobs turn